Thin-film Lithium Niobate MZ Modulator (IO) ORI-MZM-T-40
Based on state-of-art Lithium Niobate on insulator (LNOI) technology, this intensity modulator inherits most of the advantages of traditional lithium niobate modulators, and has a miniature form factor, low driving voltage and low loss. ORI-MZM-T-BW is the thermal tuning version, whose phase shift is tuned by micron heaters integrated on chip. Compared to traditional LN modulators, the heater version could maintain a lot more stable bias point throughout lifetime of the device. The device is a hermetic sealing package with internal optical power, which save more space size for the end user. The low RIN laser source is also integrated in the package. Two MPD’s are included for power monitoring purpose. One PD is used to monitor the laser output power and the other is to monitor the MZ bias point.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| RF Vπ @ 1kHz V_(pi_RF) | typical:3.3 V; max:3.5 V |
| RF Vπ @ 1GHz V_(pi_RF) | max:4 V |
| Electro-optical 3-dB Bandwidth BW | min:40 GHz |
| Electrical return loss (f<40GHz) | max:-10 dB |
| Characteristic impedance Z_(c) | typical:50 Ohm |
| Heater resistance | min:80 Ohm; max:400 Ohm |
| DC tuning Pπ P_(π_DC) | min:45 mW; typical:55 mW; max:70 mW |
| LD operating current If | typical:300 mA; max:400 mA |
| LD Forward Voltage Vr | min:1.2 V; max:2 V |
| Relative Intensity Noise RIN [Between 100MHz to 20GHz, with If=400 mA, -40dB reflection] | typical:-155 dB/Hz |
| Thermistor resistance Rth | min:9.5 KΩ; typical:10 KΩ; max:10.5 KΩ |
| TEC Current Itec | max:1.2 A |
| TEC Voltage Vtec | max:8.8 V |
| Output power（If=400mA) OP | min:12 dBm; typical:13 dBm |
| DC Extinction ratio ER | min:20 dB |
| Wavelength range | min:1535 nm; typical:1550 nm; max:1565 nm |
| MPD1 Photocurrent (If=40mA) | min:0.02 mA |
| MPD2 Photocurrent (If=40mA) | min:0.1 mA |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Lithium Tantalate Wafer LT
Optical Crystals
Jmwafer
Diameter [Lithium Tantalate Single-Crystal Substrate LiTaO3/LT (2~6 Inches)]: 2 inch - 50.8mm Diameter [Lithium Tantalate Single-Crystal Substrate LiTaO3/LT (2~6 Inches)]: 3 inch - 76.2mm Diameter [Lithium Tantalate Single-Crystal Substrate LiTaO3/LT (2~6 Inches)]: 4 inch - 100mm
LiTaO₃ Usually Colorless/Pale Yellow,Trigonal Distorted-Perovskite Structure,Excellent Electro-Optic,Piezoelectric/Pyroelectric Properties.
-
Lithium Niobate Wafer LN
Optical Crystals
Jmwafer
Diameter [Lithium Niobate Single-Crystal Substrate LiNbO3/LN (2~6 Inches)]: 2 inch - 50.8mm Diameter [Lithium Niobate Single-Crystal Substrate LiNbO3/LN (2~6 Inches)]: 3 inch - 76.2mm Diameter [Lithium Niobate Single-Crystal Substrate LiNbO3/LN (2~6 Inches)]: 4 inch - 100mm
LiNbO₃ Trigonal,Good Symmetry/Structural Stability,Piezoelectric,Ferroelectric,Photoelectric,Acousto-Optic/Nonlinear Properties,Curie up to1140℃,High Mechanical Quality/Chemical Stability.
-
Polycrystalline Diamond
Optical Crystals
Jmwafer
Polycrystalline Diamond - Dimensions: 10 mm × 10 mm Polycrystalline Diamond - Dimensions: 1 inch - 25.4mm Polycrystalline Diamond - Dimensions: 2 inch - 50.8mm
Diamond:Tetrahedrally Packed Carbon,Extremely Hard,Excellent Thermal Conductivity/Broad Optical Transparency,Hardest Known Natural Material,Also Synthesized at High Pressure/Temperature.
-
Single-Crystal Diamond
Optical Crystals
Jmwafer
Single-Crystal Diamond - Diameter: 5 mm × 5 mm Single-Crystal Diamond - Diameter: 10 mm × 10 mm Single-Crystal Diamond - Diameter: 20 mm × 20 mm
Diamond:Tetrahedrally Packed Carbon,Extremely Hard,Excellent Thermal Conductivity/Broad Optical Transparency,Hardest Known Natural Material,Also Synthesized at High Pressure/Temperature.
-
Fluorophlogopite
Optical Crystals
Jmwafer
Fluoromica Substrate - Dimensions: 5 mm × 5 mm Fluoromica Substrate - Dimensions: 10 mm × 10 mm Fluoromica Substrate - Dimensions: 20 mm × 20 mm
Synthetic Fluorophlogopite Mica KMg3(AlSi3O10)F2,Melts1375℃/Long-Term up to1100℃,Colorless Transparent,Strong Acid-Alkali Inert,Stable/Pure/Complete Structure/Flat Cleavage,Easily Split Thin.
Related Articles
On January 21, 2026, SPIE Photonics West, one of the world’s leading photonics events, was held in San Francisco, USA. RaySea presented its latest self‑developed VCSEL achievements at this prestigious exhibition. Dr. Lai, the company’s senior R&D representative, delivered a technical speech during the dedicated VCSEL session. His presentation covered cutting‑edge progress of in‑house multi‑junction VCSEL solutions built for automotive lidar and embodied‑intelligence robots, drawing strong attention from the global photonics community.
Shandong Haucore Optoelectronics Co., Ltd. introduces the HGLD‑792‑COS‑D‑10WB semiconductor laser within its COS series. Delivering an output power of 10 W at a central wavelength of 792 nm, this device adopts gold‑tin bonding COS packaging. Featuring high reliability and long service life, it serves as a preferred pump source for solid‑state lasers and is widely deployed in industrial processing, laser display, medical & aesthetic treatment, scientific research and other fields.
Founded in 2019, Jilin JC Ultrafast Equipment Co., Ltd. is a high-tech enterprise incubated by the Ultrafast Optoelectronics Center of Jilin University. Our R&D team owns 15 years of profound experience in femtosecond laser micro-nano fabrication.
Recently, our R&D crew carried‑out performance tests on domestically‑made third‑party LiDAR hardware. The original built‑in sensor chip was replaced by Optics‑Valley Quantum’s new‑generation D‑XXLA200‑02 chip.
Loading...
Name
Phone
Organization
Use Case
Database Platform