NK6200 PON time-timer
NK6200 PON OTDR integrates OTDR,optical power measurement,visible-red fault location,a stable source,event mapping and optical-loss testing. End-face inspection requires a separately purchased probe.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Wavelength [OTDR；PD1] | 1310±20/1550±20 |
| Maximum Dynamic Range [OTDR；PD1] | 37/35 |
| Wavelength [OTDR；PS1] | 1625 ± 20 (with filter) |
| Maximum Dynamic Range [OTDR；PS1] | 38 dB |
| Filter [OTDR；PS1] | High > 1595nm; isolation > 40dB (1270-1585nm) |
| Wavelength [OTDR；PS2] | 1650 ± 5 (with filter) |
| Maximum Dynamic Range [OTDR；PS2] | 38 dB |
| Filter [OTDR；PS2] | Passband 1650±7nm; isolation >40dB (1650±7nm) |
| Wavelength [OTDR；PT1] | 1310/1550 ± 20; 1625 ± 20 (with filters) |
| Maximum Dynamic Range [OTDR；PT1] | 38/36/36 |
| Filter [OTDR；PT1] | High > 1595nm; isolation > 40dB (1270-1585nm) |
| Wavelength [OTDR；PT2] | 1310/1550 ± 20; 1625 ± 20 (with filters) |
| Maximum Dynamic Range [OTDR；PT2] | 40/38/38 |
| Filter [OTDR；PT2] | High > 1595nm; isolation > 40dB (1270-1585nm) |
| Wavelength [OTDR；PT3] | 1310/1550 ± 20; 1625 ± 20 (with filters) |
| Maximum Dynamic Range [OTDR；PT3] | 42/40/40 |
| Filter [OTDR；PT3] | High > 1595nm; isolation > 40dB (1270-1585nm) |
| Wavelength [OTDR；PT4] | 1310/1550 ± 20; 1650 ± 5 (with filters) |
| Maximum Dynamic Range [OTDR；PT4] | 38/36/36 |
| Filter [OTDR；PT4] | Passband 1650±7nm; isolation >40dB (1650±7nm) |
| Fiber Type [OTDR and the whole machine.] | G.652 units |
| Declining Blind Zone [OTDR and the whole machine; footnote b: 3ns pulse, reflect factor -55dB (1310nm), typical value] | 3.5 m |
| PON Blind [OTDR and the whole machine; footnote c: non-reflective FUT, optics, no-reflective spectrometers, 13dB wear, 50ns pulse, typical value] | 30 m |
| Test Scale [OTDR and the whole machine.] | 100m/500m/1.25km/2.5km/5km/10km/20km/40km/80km/125km/260km/420km |
| Test Pulse Width [OTDR and the whole machine.] | 3/5/10/20/30/50/80/100/200/300/500/800ns；1/2/3/5/8/10/20μs |
| Ranging Accuracy [OTDR and the whole machine; footnote d: does not include uncertainty caused by fibre optic refractive rate] | ±(0.75m + sampling interval + 0.0025%×test distance) |
| Loss resolution [OTDR and the whole machine.] | ±0.001 dB |
| Sample Resolution [OTDR and the whole machine.] | 0.015～16 m |
| Reflect precision [OTDR and the whole machine.] | ±2 dB |
| File Format [OTDR and the whole machine.] | SOR Standard File Format |
| Loss measurement model [OTDR and the whole machine.] | 4-point method / 5-point method |
| Laser Class [OTDR and the whole machine.] | Class II |
| Light Connector [OTDR and the whole machine.] | FC/UPC (interchangeable SC, ST) |
| Refresh Rate in Real Time [OTDR and the whole machine.] | typical:4 Hz |
| Operating Temperature [OTDR and the whole machine.] | -10～+50 ℃ |
| Storage Temperature [OTDR and the whole machine.] | -40～+70 ℃ |
| Relative humidity [OTDR and complete; undisclosed] | 0～95 % |
| Total Instrument Weight [OTDR and the whole machine.] | ≤1.2 kg |
| Wavelength Range [Photometer] | 800～1700 nm |
| Light Connector [Photometer] | Universal access FC/SC/ST |
| Uncertainty [Photometer] | ±5 % |
| Calibrated Wavelength [Photometer] | 850/980/1300/1310/1490/1550/1625/1650 |
| Laser type [Light Source] | FP-LD |
| Output wavelength [Light Source] | Same wavelength as OTDR output |
| Output Power [light sources;single-modules] | ≥-5 dBm |
| Stability [Light source; CW, 15min post-heat test] | ±0.5 dB/15min |
| Light Connector [Light Source] | FC/UPC (interchangeable SC, ST) |
| Operating Wavelength [Visual breakdown positioning] | 650±20 nm |
| Output Power [Visual breakdown positioning] | ≥10 mW |
| Operating Mode [Visual breakdown positioning] | CW/1Hz/2Hz |
| Light Connector [Visual breakdown positioning] | FC/UPC (interchangeable SC, ST) |
| Event Blind [OTDR and the whole machine; footnote a: 3ns pulse, reflect factor-35 to-55dB, typical value] | 0.5 m |
| Loss accuracy [OTDR and the whole machine.] | 0.03 dB/dB |
| Maximum sample points [OTDR and the whole machine.] | ≥256 k |
| Loss threshold [OTDR and the whole machine.] | 0.01 dB |
| Internal storage [OTDR and the whole machine.] | 2GB (≥200000 entries) |
| Maximum external storage [OTDR and the whole machine.] | 64 GB |
| Data Interface [OTDR and the whole machine.] | USB-A, Type-C port, RJ45 LAN 10/100 Mbit/s |
| Show [OTDR and the whole machine.] | 7-inch colour liquid crystal screen + touch screen, 800 × 480 |
| Type-C power adapter input [OTDR and the whole machine.] | 100～240V，50/60Hz |
| Type-C power adapter output [OTDR and the whole machine.] | 5V/3A、9V/2A、12V/1.5A |
| Internal Battery [OTDR and the whole machine.] | 3.7V，10400mAh |
| Dimensions [OTDR and the whole machine.] | 215 mm × 160 mm × 50 mm |
| Measurement Range [Photometer] | -50～+26 dBm |
| Measurement Range [Photometers;list of selected items] | -70～+6 dBm |
| Operating Mode [Light Source] | CW/270Hz/1kHz/2kHz |
| Multi-Model Light Output Power [Light source;850/1300nm] | Approximately 24 |
| Special 1650 nm light output power [light source;footnote e: 38dB configuration] | Approximately 24 |
| OTDR interface options [Bottom note of the technical table] | FC/UPC. Options for FC/APC |
Applications
Datasheet
Supplier Information
Related Products
-
Y3000 demodulator Fiber Test & Measurement Bws-tech
Y3000-Operating Wavelength: C band 1550nm Y3000-Fiber Interface: FC/APC Y3000-Power Supply: 12 VDC
The Fiber Y3000 series high-speed demodulator uses interference-fringe counting and phase demodulation to resolve cavity-length changes accurately, with sampling frequencies up to 100MHz. It supports simultaneous interference using dual-wavelength laser sources, greatly improving demodulation accuracy and reliability. The low transmission loss of the 1550nm source also enables long-distance detection. The high-speed demodulator is suitable for Baiweishen Technology's Fiber S100 and Fiber S200 Fabry-Perot cavity pressure sensors and can be used for high-speed pressure monitoring.
-
Test series SWT-32EML Fiber Test & Measurement Soliware
LD drive current: max:500 mA Power Supply Voltage [Original Power Supply Column]: 1AC220 Power Supply Frequency [Original Power Supply Column]: 50/60
-
Tera2100-2 100G optoelectronic bit-error-rate tester Fiber Test & Measurement Terawan
Data Rate [Performance Parameter Table]: 9~29 Gb/s Output amplitude [Performance Parameter Table]: 200~1000 mV Output jitter (P-P) [Performance Parameter Table; PRBS31]: typical:5 Ps
The Tera2100-2 provides 10G/25G/40G/100G electrical pattern generation and error detection, plus 40G/100G QSFP+/QSFP28 module analysis, generation, and error detection. Four RF interfaces support 10G/11G/12G/14G/22G/24.3G/25.7G/28.05Gb/s for 10GE/16GFC/25GE/40GE/CPRI/100GE/128GFC module/AOC development, with 4-channel precision 10G~28G testing. Tera2100-OE enables 10G/25G eye diagrams. Optical QSFP+/QSFP28 ports test 100GE QSFP28 (SR, CWDM, PSM4, LR), 40GE QSFP+ (SR, LR), and 64GFC QSFP+, with 4-channel precision 10G/14G/28G bit-error testing.
-
Tera2102 10G~100G temperature-controlled test system Fiber Test & Measurement Terawan
Temperature Range [TEC control section; Performance table]: -5~85 ℃ Power Supply [TEC control section; Performance table; TEC system is AC-powered]: typical:220 V(AC) Total Unit Power Consumption [TEC control section; Performance table]: ≤180 W
The Tera2102 is a 40G/50G/100G temperature-controlled test system with two module-test paths at different temperatures: First, 40G/50G/100G QSFP+/QSFP28; second, 10G/25G SFP+/SFP28. Each RF interface supports 10G/11G/12G/14G/22G/24.3G/25.7G/28.05Gb/s for 10GE/16GFC/25GE/40GE/CPRI/100GE/128GFC module/AOC development. Tera2100-OE enables 10G/25G eye diagrams.
-
Tera2140 10G/25G/40G/100G module tester Fiber Test & Measurement Terawan
Power Supply: 5 V Module interface [SFF interfaces for two module types]: QSFP+/QSFP28、SFP+/SFP28 Number of PRBS signal channels [QSFP+/QSFP28; 10G or 25G~28Gb/s]: 4 channels
The Tera2140 tests 10G/25G/40G/100G modules through QSFP+/QSFP28 and SFP+/SFP28. It tests services/performance of 100GE QSFP28 (SR, CWDM, PSM4, LR) and 40GE QSFP+ (SR, LR), with 4-channel precision 10G/25G errors. It also tests 25GE SFP28 (SR, LR) and 10GE SFP (SR, LR), with single-channel precision 10G/25G errors.
Related Articles
The LZFL405‑80mW‑3 series from Shenzhen Leirte Optoelectronics Co., Ltd. is a coaxial‑packaged violet‑blue single‑mode fiber‑coupled laser diode. It delivers 80 mW continuous‑wave output at 405 nm. Light is coupled into 3 μm core‑diameter single‑mode fiber for clean beam quality and easy integration into diverse optical systems. It serves as a compact violet‑blue light source for medical instruments and industrial printing applications.
Wuhan Optics Valley Quantum Technology Co., Ltd. is a leading domestic developer of high‑speed semiconductor optical chips and photodetector components. Our product portfolio covers InGaAs avalanche photodiode bare dies and PIN photodetector chips designed for fiber‑optic communication
As a professional ultraviolet‑laser solution provider, Precilasers has launched its 266 nm narrow‑linewidth industrial laser, delivering reliable single‑frequency output for high‑precision interference lithography, semiconductor inspection and precision metrology applications.
Electro-optic deflectors (EODs) are optical devices used to steer or deflect light beams by applying an electric field to a specialized optical crystal. Unlike mechanical beam steering systems that rely on moving mirrors, electro-optic deflectors enable high-speed, non-mechanical beam control with exceptional precision and responsiveness. They are widely used in laser scanning, optical communications, microscopy, laser printing, spectroscopy, and scientific research, where rapid and accurate laser beam positioning is essential.
Loading...
Name
Phone
Organization
Use Case
Database Platform