NK1500
The current product quotes Box-OTDR technical table provides a phototimer, light source, photopower meter and visual failure locator function, with the use of the Type-C communications interface and external power supply, distinguishing parameters by model and common/spore-selected modules.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Wavelengths [OTDR；F1] | 1550 ± 20 nm (with light) |
| Maximum Dynamic Range [OTDR; F1; 23℃±2℃; maximum test pulse width; measurement time >180s; SNR=1; typical] | 22 dB |
| Wavelengths [OTDR；F2] | 1610 ± 20 nm (with light) |
| Maximum Dynamic Range [OTDR; F2; footnote 1: 23°C ± 2°C, maximum test pulse width, measured time > 180s, SNR = 1, typical value] | 20 dB |
| Wavelengths [OTDR；D1] | 1310/1550±20 |
| Maximum Dynamic Range [OTDR; D1; 23℃±2℃; maximum test pulse width; measurement time >180s; SNR=1; typical] | 24/22 |
| Wavelengths [OTDR；D1-Live] | 1310/1550±20 |
| Maximum Dynamic Range [OTDR; D1-Live; footnote 1: 23 °C ±2 °C, maximum test pulse width, measurement time >180s, SNR = 1, typical value] | 24/22 |
| Pulse Width [OTDR and the whole machine.] | 3/5/10/20/30/50/80/100/200/300/500/1000/2000/3000/5000/8000/10000/20000 |
| Measurement Range [OTDR and the whole machine.] | 0.1/0.3/0.5/1.25/2.5/5/10/20/40/80/125/260 |
| Event Blind [OTDR and the whole machine; footnote 2: 3ns pulse, echo loss 35-55dB] | ≤1.5 m |
| Declining Blind Zone [OTDR and the whole machine; footnote 3:3ns pulse, echo loss typical of 55dB] | ≤8 m |
| Sample interval [OTDR and the whole machine.] | 0.03～8 m |
| Max. Sample Point [OTDR and the whole machine.] | 32000 |
| Refraction Rate Settings Range [OTDR and the whole machine.] | 1.000000～2.000000 |
| Uncertainty of test distance [OTDR and the whole machine.] | ± (0.75 m+sampling interval + 0.005% × distance) |
| Linearity [OTDR and the whole machine.] | ±0.05 dB/dB |
| Power Supply [OTDR and complete machine; typical] | +5 V |
| Maximum power supply [OTDR and the whole machine.] | <+6 V |
| Power Consumption [OTDR and complete; 25°C] | ≤2 W |
| Communications interface [OTDR and the whole machine.] | Type-C |
| Operating Temperature [OTDR and the whole machine.] | -10～+50 ℃ |
| Operating Humidity [OTDR and complete machine; no condensation] | ≤95 % |
| Storage Temperature [OTDR and the whole machine.] | -40～+70 ℃ |
| Output wavelength [Light Source] | Same wavelength as OTDR output |
| Output Power [Light Source] | ≥-5 dBm |
| Light Connector [Light Source] | Consistent with OTDR interface |
| Output Mode [Light Source] | CW/270Hz/330Hz/1kHz/2kHz |
| Wavelength Range [General photometer] | 800～1700 nm |
| Calibrated Wavelength [General photometer] | 850/1300/1310/1490/1550/1625/1650 |
| Measurement Range [conventional photopower meters; optional] | -70～+10 dBm |
| Measurement Range [conventional photopower meters; optional] | -50～+26 dBm |
| Resolution [General photometer] | 0.01 dB |
| Uncertainty [General photometer] | ±5 % |
| Identification frequency [General photometer] | CW/270Hz/330Hz/1kHz/2kHz |
| Light Connector [General photometer] | Universal Access FC/SC/ST |
| Wavelength recognition [General photometer] | Not Supported |
| Calibrated Wavelength [Spectrometer (selection); other column vacancies do not depend on normal photometry] | 1490/1577 |
| Measurement Range [Spectrometer (selection); other column vacancies are not based on normal photometry; optional] | -50～+26 dBm |
| Operating Wavelength [Visual breakdown positioning] | 650±20 nm |
| Output Power [Visual breakdown positioning] | ≥10 mW |
| Operating Mode [Visual breakdown positioning] | CW/1Hz/2Hz |
| Light Connector [Visual breakdown positioning] | Universal Access FC/SC/ST |
| Laser Class [Visual breakdown positioning] | Class III |
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Y3000 demodulator Fiber Test & Measurement Bws-tech
Y3000-Operating Wavelength: C band 1550nm Y3000-Fiber Interface: FC/APC Y3000-Power Supply: 12 VDC
The Fiber Y3000 series high-speed demodulator uses interference-fringe counting and phase demodulation to resolve cavity-length changes accurately, with sampling frequencies up to 100MHz. It supports simultaneous interference using dual-wavelength laser sources, greatly improving demodulation accuracy and reliability. The low transmission loss of the 1550nm source also enables long-distance detection. The high-speed demodulator is suitable for Baiweishen Technology's Fiber S100 and Fiber S200 Fabry-Perot cavity pressure sensors and can be used for high-speed pressure monitoring.
-
Test series SWT-32EML Fiber Test & Measurement Soliware
LD drive current: max:500 mA Power Supply Voltage [Original Power Supply Column]: 1AC220 Power Supply Frequency [Original Power Supply Column]: 50/60
-
Tera2100-2 100G optoelectronic bit-error-rate tester Fiber Test & Measurement Terawan
Data Rate [Performance Parameter Table]: 9~29 Gb/s Output amplitude [Performance Parameter Table]: 200~1000 mV Output jitter (P-P) [Performance Parameter Table; PRBS31]: typical:5 Ps
The Tera2100-2 provides 10G/25G/40G/100G electrical pattern generation and error detection, plus 40G/100G QSFP+/QSFP28 module analysis, generation, and error detection. Four RF interfaces support 10G/11G/12G/14G/22G/24.3G/25.7G/28.05Gb/s for 10GE/16GFC/25GE/40GE/CPRI/100GE/128GFC module/AOC development, with 4-channel precision 10G~28G testing. Tera2100-OE enables 10G/25G eye diagrams. Optical QSFP+/QSFP28 ports test 100GE QSFP28 (SR, CWDM, PSM4, LR), 40GE QSFP+ (SR, LR), and 64GFC QSFP+, with 4-channel precision 10G/14G/28G bit-error testing.
-
Tera2102 10G~100G temperature-controlled test system Fiber Test & Measurement Terawan
Temperature Range [TEC control section; Performance table]: -5~85 ℃ Power Supply [TEC control section; Performance table; TEC system is AC-powered]: typical:220 V(AC) Total Unit Power Consumption [TEC control section; Performance table]: ≤180 W
The Tera2102 is a 40G/50G/100G temperature-controlled test system with two module-test paths at different temperatures: First, 40G/50G/100G QSFP+/QSFP28; second, 10G/25G SFP+/SFP28. Each RF interface supports 10G/11G/12G/14G/22G/24.3G/25.7G/28.05Gb/s for 10GE/16GFC/25GE/40GE/CPRI/100GE/128GFC module/AOC development. Tera2100-OE enables 10G/25G eye diagrams.
-
Tera2140 10G/25G/40G/100G module tester Fiber Test & Measurement Terawan
Power Supply: 5 V Module interface [SFF interfaces for two module types]: QSFP+/QSFP28、SFP+/SFP28 Number of PRBS signal channels [QSFP+/QSFP28; 10G or 25G~28Gb/s]: 4 channels
The Tera2140 tests 10G/25G/40G/100G modules through QSFP+/QSFP28 and SFP+/SFP28. It tests services/performance of 100GE QSFP28 (SR, CWDM, PSM4, LR) and 40GE QSFP+ (SR, LR), with 4-channel precision 10G/25G errors. It also tests 25GE SFP28 (SR, LR) and 10GE SFP (SR, LR), with single-channel precision 10G/25G errors.
Related Articles
The LZFL405‑80mW‑3 series from Shenzhen Leirte Optoelectronics Co., Ltd. is a coaxial‑packaged violet‑blue single‑mode fiber‑coupled laser diode. It delivers 80 mW continuous‑wave output at 405 nm. Light is coupled into 3 μm core‑diameter single‑mode fiber for clean beam quality and easy integration into diverse optical systems. It serves as a compact violet‑blue light source for medical instruments and industrial printing applications.
Wuhan Optics Valley Quantum Technology Co., Ltd. is a leading domestic developer of high‑speed semiconductor optical chips and photodetector components. Our product portfolio covers InGaAs avalanche photodiode bare dies and PIN photodetector chips designed for fiber‑optic communication
As a professional ultraviolet‑laser solution provider, Precilasers has launched its 266 nm narrow‑linewidth industrial laser, delivering reliable single‑frequency output for high‑precision interference lithography, semiconductor inspection and precision metrology applications.
Electro-optic deflectors (EODs) are optical devices used to steer or deflect light beams by applying an electric field to a specialized optical crystal. Unlike mechanical beam steering systems that rely on moving mirrors, electro-optic deflectors enable high-speed, non-mechanical beam control with exceptional precision and responsiveness. They are widely used in laser scanning, optical communications, microscopy, laser printing, spectroscopy, and scientific research, where rapid and accurate laser beam positioning is essential.
Loading...
Name
Phone
Organization
Use Case
Database Platform