Laser Forensic Evidence Finder TL-2

Maximum Test Force [One range is included as standard; up to three additional ranges can be selected.]: 5N, 10N, 20N, 30N, 50N, 100N, 200N, 300N, 500N, 1KN, 2KN, 3KN, 5KN, 10KN, 20KN, 30KN and 50KN. One range is included as standard, with up to three additional ranges optional. Accuracy Grade: Class 0.5/Class 0.25 Test Force Measurement Range [Full scale]: 0.2%～100%FS（ Full scale ）

Prints multiple data sets and generates comparative graphs. Modular design and comprehensive accessories provide flexible configurations. It performs cyclic constant-stress, constant-strain, creep, relaxation, axial and radial tests. Under GB, JIS, ASTM and DIN standards, it calculates tensile strength, yield strength, elongation, stress at specified elongation, elongation at specified stress, elastic modulus, elongation at break, peel strength including 90°/180° peeling, flexural modulus, breaking strength, bond strength and shear strength.

Working Chamber Dimensions D×W×H: 450 mm × 600 mm × 400 mm Overall dimensions (HxWxD): 560×1150×1000 Power: 2.5(kw)

The salt-spray corrosion test chamber evaluates sample corrosion resistance by testing materials and protective coatings under salt spray. It compares the process quality of similar protective coatings and evaluates the salt-spray resistance of certain products.

Working Chamber Dimensions D×W×H: 600 mm × 900 mm × 500 mm Overall dimensions (HxWxD): 770×1450×1200 Power: 3.0(kw)

The salt-spray corrosion test chamber evaluates sample corrosion resistance by testing materials and protective coatings under salt spray. It compares the process quality of similar protective coatings and evaluates the salt-spray resistance of certain products.

Test Standards Met: JB/T5376 technical requirements for low-temperature constant-temperature baths; GB/T 2423.2-2008 test B high-temperature method; GJB 150.3A-2009 B high-temperature test; JB / T5520-91 technical requirements for drying ovens. Overall Dimensions: 4350x2650x3100mm（W*H*D） Saltwater Tank Interior Dimensions: 3150x2200x900mm(W*H*D)

The salt-spray chamber is used in aerospace, aviation, electronics, automotive and battery industries to test corrosion of electrical/electronic products, metals, parts and equipment. Tests evaluate materials and protective coatings under specified conditions. The humidity/temperature salt-spray tester supplier tests corrosion resistance under severe environmental changes for automotive and aviation equipment, photographic equipment, building materials, power, electrical and electronic systems.

The Micro Support micro sampling instrument from Japan assists microanalysis. In micro-IR, micro-Raman, XRD, SEM and TEM, tiny samples may be covered, embedded or bonded, difficult to access for signals, or smaller than an instrument can detect. This precision system uses mouse control to remove or expose samples automatically from multiple angles, enabling subsequent analysis. It is widely used for small samples, foreign matter, multilayer composites and FIB sample preparation, and is particularly useful for quality control and development of display materials.