Q-Drive™ OEM KD*P Pockels Cell Driver
The OEM Q-Drive™ is a low-cost, high-performance Pockels cell driver for integration into Q-switched laser systems. Repetition rate is1–4.5kHz, output voltage1.5–4.5kV, rise/fall time4–7ns, and pulse width150ns–5μs. It is packaged on a100x83mm(4x3¼") circuit board. Its fully self-contained supply controls all circuitry and requires an external24V DC supply and trigger signal. It suits loads up to30pF.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Pulse Top [Standard Value;4kV Output;6pF Battery Capacitance (Source Wording)] | Standard Value:150ns (4kV Output,6pF Battery Capacitance) |
| Decay Time Constant [Standard Value;4kV Output;6pF Battery Capacitance (Source Wording)] | Standard Value:<5μs (4kV Output,6pF Battery Capacitance) |
| Pulse Voltage | min ：1.5kV， max ：4.5kV |
| Load Capacitance | max ：30pF |
| Current [24 V DC; Power Limit before Output Foldback] | max:180mA (Power Limit before Output Foldback) |
| Trigger Voltage | min ：2V， max ：8V |
| Input Impedance | min ：48Ω， max ：52Ω |
| Pulse Width | min ：200ns |
| Jitter, Trigger Output [Standard Value;RMS;2ns Trigger Rise Time; Tektronix11801] | Standard Value:20ps RMS (2ns Trigger Rise Time, Tektronix11801) |
| Temperature | min:-20℃; max:50℃ |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
1CH×25G/28G DML Driver
Software and Data Services
Xy-technology
XY5221DD is One. Single Channel Laser Driver ， Designed for direct modems 25Gb/s Laser Interface 。 The currents and the transients can be replaced by the currents. 2 Line Line Lines Interface Independent Programming ， Meanwhile... 2 Line Interface Supports also the inclusion of programmability for balancing and cross-point adjustments ， Take one. Tx Disable ， It can be closed. Laser Erosion and Moderation Current ， Existing IBIAS Monitor 。 This simulation output can be used to Laser Overcrowding and / or Laser Modulation Current for External Monitoring 。 There's a piece in there. ADC Functions ， It can be used for foot-inducing measurements via electrical input of a special back-cover monitor TX_PWR。ADC It can also be configured for measurement. VCC（ ..can measure each Power Supply ） and IBIAS（ Average Laser Erosion of currents ）。
-
1CH×25G/28G EML Driver
Software and Data Services
Xy-technology
XY5221E is A high-performance piece. Single Channel 28Gbps EML Driver 。 It provides daring. 30GHz High bandwidth and greater than 2.5Vpp and the output range ， The cost of the operation is about 0.17W。 It's designed for use in... Drive EML Laser ， The chip is available in nudity chip form. 。
-
4CH×25G/28G DML Driver
Software and Data Services
Xy-technology
XY5224DD is One. Four Channel Laser Driver ， Designed for direct modems 25Gb/s Laser Interface 。 The currents and the transients can be replaced by the currents. 2 Line Line Lines Interface Independent Programming ， Meanwhile... 2 Line Interface Supports also the inclusion of programmability for balancing and cross-point adjustments ， Take one. Tx Disable ， It can be closed. Laser Erosion and Moderation Current ， Existing IBIAS Monitor 。 This simulation output can be used to Laser Overcrowding and / or Laser Modulation Current for External Monitoring 。 There's a piece in there. ADC Functions ， It can be used for foot-inducing measurements via electrical input of a special back-cover monitor TX_PWR。ADC It can also be configured for measurement. VCC（ ..can measure each Power Supply ） and IBIAS（ Average Laser Erosion of currents ）。
-
4CH×25G/28G EML Driver
Software and Data Services
Xy-technology
XY5224E is A high-performance piece. Four Channel 28Gbps EML Driver 。 It provides daring. 30GHz High bandwidth and greater than 2.5Vpp and the output range ， The cost of the operation is about 0.45W。 It's designed for use in... Drive EML Laser ， The chip is available in nudity chip form. 。
-
25G/28G CDR+VCSEL Driver
Software and Data Services
Xy-technology
XY5921V Integration VCSEL Driver 、 Balancer and clock data recovery 。 None The reference clock will support it. 24.3Gbps Present. 28.1Gbps Rate range ， It's also possible. bypass Mode supports lower rate 。 The chip is provided in nudist form. 。
Related Articles
Driven by the continuous pursuit of higher precision and efficiency in optical communication and optoelectronic device manufacturing, OLCR-1000 Low-Coherence Interferometer, independently developed by Wuhan Guanggu Interconnect Technology Co., Ltd., provides an innovative technical solution for distributed return loss testing of optical fibers and optoelectronic devices.
icrolight is a high-tech enterprise specializing in the R&D, manufacturing and sales of active and passive photonic devices for microwave photonics, LiDAR ranging, gas sensing, fiber optics and photomedicine.
BEIJING JIEPU TREND supplies YAG+Er:YAG+YAG bonded composite slab laser crystals for high‑power solid‑state laser systems. The monolithic slab consists of two undoped YAG end‑cap layers and a central Er‑doped YAG gain segment. The overall dimension is 9 mm×9 mm×9 mm.
Shanghai Connet Laser Technology Co., Ltd. focuses on technological innovation, delivering cutting-edge photonic products & solutions for industrial lasers, LiDAR, fiber optic sensing, coherent telecom, cold atom physics and precision spectroscopy research & mass manufacturing.
Loading...
Name
Phone
Organization
Use Case
Database Platform