LBO
Lithium triborate(LiB3O5,LBO) is a nonlinear optical crystal for frequency conversion,SHG/THG and optical parametric generation,oscillation and amplification.
Specification Snapshot
Parallelism
20″
Request a Quote
Download Datasheet
Overview
Lithium triborate(LiB3O5,LBO) is a nonlinear optical crystal for frequency conversion,SHG/THG and optical parametric generation,oscillation and amplification.
Specifications
| Parameter | Value |
|---|---|
| Crystal Structure | Orthorhombic Crystal System, Space Group Pna21, Point Group mm² |
| Unit Cell Parameters | a=8.4473 Å, b=7.3788 Å, c=5.1395 Å, Z=4 |
| Melting Point | Approximately 834 ℃ |
| Mohs Hardness | 6 Mohs |
| Density | 2.47 g/cm³ |
| Thermal Conductivity | 3.5 W/m/K |
| Coefficient of Thermal Expansion | αₓ=10.8×10⁻⁵ /K,α_y=-8.8×10⁻⁵ /K,α_z=3.4×10⁻⁵ /K |
| Transmission Band | 160-2600 nm |
| SHG Phase-Matching Range | 551-2600 nm (TypeⅠ) 790-2150 nm (Type Ⅱ) |
| Thermo-Optic Coefficient [λ in μm] | dnₓ/dT=-9.3×1⁰⁻⁶ dn_y/dT=-13.6×10⁻⁶ dn_z/dT=(-6.3-2.1λ)×10⁻⁶ |
| Absorption Coefficient | <0.1%/cm @ 1064 nm,< 0.3%/cm @ 532 nm |
| Acceptance Angle | 6.54 mrad·cm (Ф,Type Ⅰ,1064 SHG) 15.27 mrad·cm (θ,Type Ⅱ,1064 SHG) |
| Temperature Bandwidth | 4.7℃·cm (Type Ⅰ,1064 SHG) 7.5℃·cm (Type Ⅱ,1064 SHG) |
| Acceptance Spectral Bandwidth | 1.0 nm·cm (Type Ⅰ,1064 SHG) 1.3 nm·cm (Type Ⅱ,1064 SHG) |
| Walk-Off Angle | 0.60° (Type Ⅰ,1064 SHG) 0.12° (Type Ⅱ,1064 SHG) |
| NLO Coefficient | deff(Ⅰ)=d₃₂cosФ (TypeⅠ, XY plane); deff(Ⅰ)=d₃₁cos2θ+d₃₂sin2θ (TypeⅠ, XZ plane); deff(Ⅱ)=d₃₁cosθ (TypeⅡ, YZ plane); deff(Ⅱ)=d₃₁cos2θ+d₃₂sin2θ (TypeⅡ, XZ plane) |
| Nonzero Nonlinear Optical Coefficients | d₃₁=1.05±0.09 pm/V d₃₂=-0.98±0.09 pm/V d₃₃=0.05±0.006 pm/V |
| Sellmeier Equation(λ in μm) | nₓ² = 2.454140 + 0.011249 / (λ² - 0.011350) - 0.014591λ² - 6.60 × 10⁻⁵ λ⁴ n_y² = 2.539070 + 0.012711 / λ² - 0.012523) - 0.018540λ² + 2.00 × 10⁻⁴ λ⁴ n_z² = 2.586179 + 0.013099 / λ² - 0.011893) - 0.017968 λ² - 2.26 × 10⁻⁴ λ⁴ |
| NCPM Temperature [Noncritical Phase Matching (NCPM)] | 148 ℃ |
| Acceptance Angle [Noncritical Phase Matching (NCPM)] | 52 mrad•cm |
| Temperature Bandwidth [Noncritical Phase Matching (NCPM)] | 4 ℃•cm |
| Effective SHG Coefficient [Noncritical Phase Matching (NCPM)] | 2.69×d36(KDP)=1.18 pm/V |
| Available Optical Faces [Up to] | 55 mm² × 55 mm² |
| Available Crystal Length [Up to] | 60 mm |
| Optical Homogeneity δn | δn≈10-6/cm |
| Spectral Noncritical Phase-Matching Band [NCPM] | Close to 1300 nm |
| Coating Stack [For frequency doubling of 1064nm] | Dual-Wavelength Antireflection Coating (DBAR) |
| Coating Stack [For Third-Harmonic Generation of 1064nm] | Triple-Wavelength Antireflection Coating |
| Reflectance [Antireflection Coating ; 1064 nm] | <0.2% |
| Reflectance [Antireflection Coating ; 532 nm] | <0.5% |
| Reflectance [Antireflection Coating ; 355 nm] | <0.2% |
| Reflectance [Ultralow-Reflectance Antireflection Coating; 1064 nm] | <0.05% |
| Reflectance [Ultralow-Reflectance Antireflection Coating; 532 nm] | <0.1% |
| Coating Stack [Frequency-Doubling Applications of Tunable Lasers] | Broadband antireflection coating (BBAR) |
| Coating Technology [Selected according to customer application requirements] | IBS or IAD |
| Spectral Acceptance Width Δλ [Calculated; SNCPM turning point λ1=1.31μm, θ=86.4°, φ=0° (Type I)] | 57 nm·cm |
| Spectral Acceptance Width Δλ [Calculated; SNCPM turning point λ2=1.30 μm, θ=4.8°, φ=0° (Type II)] | 74 nm·cm |
| Dimensional Tolerance [L≥2.5 mm] | (W±0.1 mm)×(H±0.1 mm)×(L+0.5/-0.1 mm) |
| Dimensional Tolerance [L<2.5 mm] | (W±0.1 mm)×(H±0.1 mm)×(L+0.1/-0.1 mm) |
| Effective Clear Aperture [Central Region] | 90% of the Diameter of the Central Region |
| Flatness [633 nm] | λ/8 @ 633 nm |
| Transmitted Wavefront Distortion [633 nm] | λ/8 @ 633 nm |
| Surface Finish [With Reference to Standard MIL-PRF-13830B] | 10/5, with Reference to Standard MIL-PRF-13830B |
| Parallelism | 20″ |
| Perpendicularity | 15′ |
| Angular Deviation | Δθ≦0.25°, ΔФ≦0.25° |
| Chamfer [45°] | ≦0.2 mm×45° |
| Edge Chipping | ≦0.1 mm |
| Damage Threshold | >10 GW/cm² @ 1064 nm, 10 ns, 10 Hz( Polished Optic ) >1 GW/cm² @ 1064 nm, 10 ns, 10 Hz( Antireflection Coating ) >0.5 GW/cm² @ 532 nm, 10 ns, 10 Hz( Antireflection Coating ) |
Applications
SHG/THG: Nd:YAG andNd:YLF support type-I/type-II matching. At room temperature,type-I matching over551-2600nm usesXY/XZ planes for maximum effective coefficient; type-II optimum usesYZ/XZ. Reported Nd:YAG SHG exceeds70% pulsed and30% CW; THG exceeds60%. Case examples:2W mode-locked Ti:sapphire(<2ps,82MHz)gives>480mW at395nm;18mm type-II LBO withQ-switched Nd:YAG gives>80W green;9mm LBO inLD-pumped Nd:YLF(>500µJ at1047nm,<7ns,0-10KHz)gives>40% SHG. Sum frequency produces187.7nm VUV; intracavity Nd:YAG THG gives diffraction-limited2mJ at355nm. NCPM offers zero walk-off,wide acceptance and large effective coefficient; reported Nd:YAG SHG>70% pulsed/>30% CW with good stable beams. The text states room-temperature type-I/type-II NCPM alongX/Z,respectively,and references a separately offered oven/controller. Further examples:25W Antares mode-locked Nd:YAG(76MHz,80ps)external doubling gives>11W mean power at532nm;medical multimode Q-switched Nd:YAG doubling gives20W green,increasing with input. OPO/OPA use: broad tuning/high damage threshold with second/third-harmonic Nd:YAG or308nm XeCl pumps. Described room-temperature type-I OPO calculations concernXY-plane second/third/fourth-harmonic Nd:YAG pumps;type-II curves concernXZ second/third-harmonic pumps. A355nm-pumped OPO tunes540-1030nm;355nm type-I OPA gives30% pump-to-signal energy conversion. A308nm pump,printedXeC1in this case,drives type-II NCPM-OPO with16.5% conversion;pump/temperature selection broadens tuning. A532nm Nd:YAG pump with106.5-148.5℃ temperature tuning gives type-I NCPM OPA750-1800nm. Type-II NCPM LBO asOPG plus type-I critically matched BBO asOPA,pumped at4.8mJ,30ps,354.7nm,gives0.15nm linewidth and32.7% pump-to-signal conversion;heating LBO or rotating BBO tunes415.9-482.6nm. Spectral NCPM:turning pointsλ1=1.31µm,θ=86.4°,φ=0°(typeI)andλ2=1.30µm,θ=4.8°,φ=0°(typeII);calculated acceptanceΔλ57nm·cm and74nm·cm,respectively,described as larger than otherNLOcrystals. Supports doubling broadband coherent light near1.3µm,including diode lasers andOPA/OPO outputs without linewidth-narrowing elements. All examples retain their distinct pump,mode,temperature and geometry conditions;no chart or curve is interpreted. Second- and third-harmonic generation of 1064 nm lasers; optical parametric oscillation and amplification; noncritical phase-matching (NCPM) frequency doubling.
Key Features
Transmission160-2600nm; optical homogeneityδn≈10-6/cm is retained in the source notation. The phrase “few internal envelopes” is unresolved rather than silently changed to an inclusion specification. SHG conversion efficiency is described as3×KDP; high damage threshold,wide angular acceptance,small walk-off,broad type-I/type-II NCPM and spectral NCPM near1300nm. Quality control; clear apertures up to55×55mm² and length60mm; AR coating,mounting,repolishing/recoating,in-stock supply. Polished parts15working days,coated parts20working days. Coatings: dual-band AR for1064nm SHG and triple-band AR for THG; R<0.2% at1064nm,<0.5% at532nm,<0.2% at355nm. Ultralow-R options<0.05% at1064nm and<0.1% at532nm. BBAR for tunable-laser doubling,IBS orIAD selected by application,high damage threshold,long life and custom coatings. Hygroscopic: use/store dry and avoid damaging polished faces. Custom sizes are recommended from pulse energy,width,repetition,CW power,beam diameter,mode,divergence and tuning range. Free mounts for thin crystals; one-year warranty under normal use.
Datasheet
Please provide your email to download the datasheet.
Your name
Email Address
Invalid email format. Please try again.
Send Request
Supplier Information
Fujian Zhongce Optoelectronics Co., Ltd. was established at the end of 2007. It is a high-tech certified enterprise specializing in the design, production, and sales of optical communication components. It has passed ISO9001-2015 international quality system, ISO14000-2004 international environmental management system, and GB/T29490-2013 intellectual property management system certifications. It is the first domestic enterprise mainly engaged in optical communication crystal component materials to be listed on the OTC exchange.
Zhongce Optoelectronics is dedicated to providing customers with full supply chain services including crystal blanks, optical cold processing, optical devices, and optical coatings. To date, the company has developed: C/G-lens, KTP wafers, TGG rods, PBS polarizing beam splitters, fiber collimators, lithium niobate (LiNbO3), yttrium vanadate (YVO4), quartz waveplates, optical isolator cores, optical isolators, optical circulator cores, and other cost-effective optical communication components and laser crystals. The company's optical isolator cores and in-line isolators fully leverage the design and processing advantages of its own optical components, maintaining an advanced level in product development and technological innovation. Experienced optical design and device packaging engineers can provide customers with various solutions.
The company actively undertakes external cooperation, establishes OEM strategic partnerships with domestic and international customers, and strives to become an excellent supplier for the optical communication industry and passive optical device manufacturers!
Contact Us
Loading...
GetExperimental Plan
Name
Phone
+86
Organization
Use Case

Global Photonics Products
Database Platform
Database Platform
With 16 years of experience, we provide high-quality products and services to universities, research institutes, and industry.
50+ Detailed Categories · 3,000+ Global Brands · 100,000+ Photonics Products
1 Million+
In-depth analysis of professional academic resources in photonics
300,000
ProductsDatasheets Available Free
We will keep your personal information strictly confidential.
Product Quote
+86
* Select the quoting party:
By submitting, you agree to the User Service Agreement and Privacy Policy