Fiber-Optic Ultrasonic Interrogator
Save to Favorites
Specifications
| Parameter | Value |
|---|---|
| Operating Frequency Range | 20kHz-50kHz |
| Optical Interface | FC/APC |
| Number of Channels | 1~3 |
| Operating Temperature Range | -25 ºC to +55 ºC |
| Sampling Frequency | 5MHz |
| Power Supply Voltage [AC] | 220V |
| Maximum Power | 5W |
| Canning Material | Aluminium Alloy |
| Display Size | 4.3Inch |
| Dimensions | 250×160×80 (mm) |
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Y3000 demodulator Fiber Test & Measurement Bws-tech
Y3000-Operating Wavelength: C band 1550nm Y3000-Fiber Interface: FC/APC Y3000-Power Supply: 12 VDC
The Fiber Y3000 series high-speed demodulator uses interference-fringe counting and phase demodulation to resolve cavity-length changes accurately, with sampling frequencies up to 100MHz. It supports simultaneous interference using dual-wavelength laser sources, greatly improving demodulation accuracy and reliability. The low transmission loss of the 1550nm source also enables long-distance detection. The high-speed demodulator is suitable for Baiweishen Technology's Fiber S100 and Fiber S200 Fabry-Perot cavity pressure sensors and can be used for high-speed pressure monitoring.
-
Test series SWT-32EML Fiber Test & Measurement Soliware
LD drive current: max:500 mA Power Supply Voltage [Original Power Supply Column]: 1AC220 Power Supply Frequency [Original Power Supply Column]: 50/60
-
Tera2100-2 100G optoelectronic bit-error-rate tester Fiber Test & Measurement Terawan
Data Rate [Performance Parameter Table]: 9~29 Gb/s Output amplitude [Performance Parameter Table]: 200~1000 mV Output jitter (P-P) [Performance Parameter Table; PRBS31]: typical:5 Ps
The Tera2100-2 provides 10G/25G/40G/100G electrical pattern generation and error detection, plus 40G/100G QSFP+/QSFP28 module analysis, generation, and error detection. Four RF interfaces support 10G/11G/12G/14G/22G/24.3G/25.7G/28.05Gb/s for 10GE/16GFC/25GE/40GE/CPRI/100GE/128GFC module/AOC development, with 4-channel precision 10G~28G testing. Tera2100-OE enables 10G/25G eye diagrams. Optical QSFP+/QSFP28 ports test 100GE QSFP28 (SR, CWDM, PSM4, LR), 40GE QSFP+ (SR, LR), and 64GFC QSFP+, with 4-channel precision 10G/14G/28G bit-error testing.
-
Tera2102 10G~100G temperature-controlled test system Fiber Test & Measurement Terawan
Temperature Range [TEC control section; Performance table]: -5~85 ℃ Power Supply [TEC control section; Performance table; TEC system is AC-powered]: typical:220 V(AC) Total Unit Power Consumption [TEC control section; Performance table]: ≤180 W
The Tera2102 is a 40G/50G/100G temperature-controlled test system with two module-test paths at different temperatures: First, 40G/50G/100G QSFP+/QSFP28; second, 10G/25G SFP+/SFP28. Each RF interface supports 10G/11G/12G/14G/22G/24.3G/25.7G/28.05Gb/s for 10GE/16GFC/25GE/40GE/CPRI/100GE/128GFC module/AOC development. Tera2100-OE enables 10G/25G eye diagrams.
-
Tera2140 10G/25G/40G/100G module tester Fiber Test & Measurement Terawan
Power Supply: 5 V Module interface [SFF interfaces for two module types]: QSFP+/QSFP28、SFP+/SFP28 Number of PRBS signal channels [QSFP+/QSFP28; 10G or 25G~28Gb/s]: 4 channels
The Tera2140 tests 10G/25G/40G/100G modules through QSFP+/QSFP28 and SFP+/SFP28. It tests services/performance of 100GE QSFP28 (SR, CWDM, PSM4, LR) and 40GE QSFP+ (SR, LR), with 4-channel precision 10G/25G errors. It also tests 25GE SFP28 (SR, LR) and 10GE SFP (SR, LR), with single-channel precision 10G/25G errors.
Related Articles
Fomoptic delivers integrated one‑stop optical solutions covering precision optical fabrication and custom vacuum coating services. Supported by complete processing production lines, comprehensive metrology equipment and experienced engineering team, we provide full‑chain customized components, ranging from blank shaping, ultra‑precision polishing to thin‑film coating, for laser systems, infrared imaging, industrial optics and scientific‑research projects.
A solid-state laser is one of the most common and reliable laser types used in modern industry, medical equipment, and scientific research. Unlike gas or fiber lasers, it uses solid materials as its gain medium to generate stable, high-brightness laser beams. Thanks to its high precision, long lifespan, and compact structure, solid-state lasers have become a mainstream solution for high-precision laser processing and optical systems.
In photonics and laser technology, devices that manipulate optical signals via the electro-optic effect form the backbone of precision optical systems. Electro-optic phase modulators and electro-optic deflectors are two prominent examples of this device category. As a critical hardware solution for high-speed, high-accuracy laser beam direction control, electro-optic deflectors are widely deployed across industrial and research settings. Below is a detailed overview of their core structure, key performance drivers, and primary use cases.
In UV laser testing, UV spectroscopy and lithography optical experiments, excessive light intensity will lead to detector saturation, optical component damage and overexposed imaging.
Loading...
Name
Phone
Organization
Use Case
Database Platform