RF amplifier 10G Optical Modulator Driver JDSU H301 Series 7V RF Amplifier
The H301 optical modulator driver provides a high-quality, single-ended voltage to drive an external laser modulator. Typical applications include driving EML, EAM, and Mach-Zehnder style modulators. The flat gain and flat group delay response yield a high quality, low-jitter electrical drive signal. The driver meets applicable SONET and SDH standards for OC-192 10 Gb/s optical transmitters and includes reference and detector outputs to enable external temperature-compensated control of output drive levels. The module has field replaceable input and output K-connectors for the input/output drive signals and an eight-pin connector for the detector, reference, and power interfaces.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Data rate | min:2.488 Gb/s；max:12.2 Gb/s |
| Frequency response [Actual Specification column supplies both frequency units; Max-column10Gb/s is a source error] | 75kHz to10GHz |
| Output amplitude [Specification>+7V; introduction explicitly uses Vpp] | typical:7.0 Vpp；max:7.5 Vpp |
| P₁dB output [Specification>22dBm] | min:22 dBm；typical:23 dBm |
| P_sat output [Specification>24dBm] | min:24 dBm |
| Gain ripple | ±1.5 dB |
| Gain control range [0 to-10Vdc using external510W resistor (literal source; resistor-unit meaning unresolved)] | min:10 dB；typical:12 dB |
| Group delay [2 to10GHz] | typical:±25 ps |
| Noise figure | 11 dB |
| Input,output impedance | 50 ohms |
| Input range | 500mv to1.5V |
| Input VSWR [75 to200KHz] | typical: 1.9; max: 2.25:1 |
| Output VSWR | typical: 2.0:1; max: 3.0:1 |
| Isolated run of ones or zeros | 100 bits |
| Pulse response - Overshoot/undershoot [Pulse response(typical)] | typical:10 % |
| Pulse response - Droop [Pulse response(typical)] | typical:10 % |
| Pulse response - Risetime [Pulse response(typical)] | typical:40 ps |
| Operating temperature [General Specifications] | min:0 °C；max:70 °C |
| Storage temperature [General Specifications] | min:-40 °C；max:100 °C |
| Operating humidity [General Specifications / non-condensing] | max:85 % |
| Storage humidity [General Specifications / non-condensing] | max:97 % |
| Altitude [General Specifications / Source publishes m(ft), both original units retained] | min: 0; max: 3048m(10000ft) |
| Soldering process temperature [General Specifications / 30seconds] | max:215 °C |
| Process temperature [General Specifications / 24hours] | max:150 °C |
| Dimensions(W×H×D) [General Specifications; both actual published unit systems retained] | 3.0x1.4x2.4cm(1.2x0.54x1.0in) |
| Power Requirements [General Specifications; source Max-column+0.5V is not defined as tolerance or absolute limit] | +8.0VDC at600mA |
| Power Requirements [General Specifications; source Max-column+0.5V is not defined as tolerance or absolute limit] | -5.0VDC at22mA |
| Total power dissipation [General Specifications; no statistical bound inferred from unruled merged layout] | 4.9 W |
| Input/output [Connectors] | AC coupled;2.9mm(field replacement K) |
| Power detector/reference/ground [Connectors] | 8-pin package |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
RD1022-200-24-015-CA
Optical Modulator Drivers
Moduoptik
Radio Frequency Frequency: 200 MHz Radio Frequency Power: 15 W Frequency Stability: ±40 ppm/℃
The radio-frequency driver (RFDriver) generates an RF signal whose switching, frequency, power and other properties can be controlled by an external modulation signal. Options include fixed frequency and adjustable frequency bandwidth, with RF frequencies mainly ranging from 20MHz to 250MHz. RF power ranges from 1W to 150W, modulation frequency from 1Hz to 1MHz, with a 50Ω load, digital and analog modulation, and a standard 24V supply. Moduoptik has a professional development and production team and manufactures its products in-house throughout the process. Drivers can be customized to customer requirements.
-
RD1028-110-24-003-CA
Optical Modulator Drivers
Moduoptik
Radio Frequency Frequency: 110 MHz Radio Frequency Power: 3 W Frequency Stability: ±40 ppm/℃
The radio-frequency driver (RFDriver) generates an RF signal whose switching, frequency, power and other properties can be controlled by an external modulation signal. Options include fixed frequency and adjustable frequency bandwidth, with RF frequencies mainly ranging from 20MHz to 250MHz. RF power ranges from 1W to 150W, modulation frequency from 1Hz to 1MHz, with a 50Ω load, digital and analog modulation, and a standard 24V supply. Moduoptik has a professional development and production team and manufactures its products in-house throughout the process. Drivers can be customized to customer requirements.
-
RD1034-110-24-050-SZ
Optical Modulator Drivers
Moduoptik
Radio Frequency Frequency: 110 MHz Radio Frequency Power: 50 W Frequency Stability: ±40 ppm/℃
The radio-frequency driver (RFDriver) generates an RF signal whose switching, frequency, power and other properties can be controlled by an external modulation signal. Options include fixed frequency and adjustable frequency bandwidth, with RF frequencies mainly ranging from 20MHz to 250MHz. RF power ranges from 1W to 150W, modulation frequency from 1Hz to 1MHz, with a 50Ω load, digital and analog modulation, and a standard 24V supply. Moduoptik has a professional development and production team and manufactures its products in-house throughout the process. Drivers can be customized to customer requirements.
-
QDG1020
Optical Modulator Drivers
Qi-nls
Internal clock [Clock reference; TCXO; ±0.1 ppm]: 100 MHz ±0.1 ppm External Input Clock Frequency [Clock reference; ≥300 mV, @50 Ω]: 20~100 MHz Total Channel Count [Delay Output]: 20
The QDG1020 multichannel digital delay generator produces 20 independent pulses from entered delay data, referenced to an internal or external clock. Delays up to 10s can be set, with maximum setting precision of 10 ps and interchannel jitter below 30 ps. All parameters can be configured through the front-panel touchscreen or remotely from a computer via RS485/LAN.
-
100G RF amplifier RF Quad-Amplifier CENTELLAX OA3MHQM
Optical Modulator Drivers
Hltoptical
Output amplitude [Current linked RF-module table; complete device model is not printed and no bare-chip/package equivalence is assumed]: max:8.0 V Gain [Current linked RF-module table; complete device model is not printed and no bare-chip/package equivalence is assumed]: typical:25 dB Gain ripple [Current linked RF-module table; complete device model is not printed and no bare-chip/package equivalence is assumed]: ±1.5 dB
The optical modulator driver modulator provides a high-quality,single-ended voltage to driver an external laser modulaor.It amplifies 2.5 to 11Gb/s data input signals to ＞+7.0Vpp driver levels.The flat gain and flat group delay response yield a high-quality，low-jitter electrical drive signal. OEM model is well available on customer’s special request.
Related Articles
Electro-optic deflectors (EODs) are optical devices used to steer or deflect light beams by applying an electric field to a specialized optical crystal. Unlike mechanical beam steering systems that rely on moving mirrors, electro-optic deflectors enable high-speed, non-mechanical beam control with exceptional precision and responsiveness. They are widely used in laser scanning, optical communications, microscopy, laser printing, spectroscopy, and scientific research, where rapid and accurate laser beam positioning is essential.
The 850 nm and 940 nm infrared narrow‑bandpass filters launched by Innovation Photoelectric are core optical components specially designed for day‑and‑night security cameras. They effectively eliminate image interference during visible‑light and infrared‑illumination switching, delivering stable round‑the‑clock monitoring performance.
Within cutting‑edge ultrafast photonics research, asynchronous optical sampling (ASOPS) and synchronous sampling serve as fundamental technologies for terahertz excitation detection, coherent Raman imaging and other time‑resolved spectroscopy experiments.
Shanghai Connet Laser Technology Co., Ltd. focuses on technological innovation, delivering cutting-edge photonic products & solutions for industrial lasers, LiDAR, fiber optic sensing, coherent telecom, cold atom physics and precision spectroscopy research & mass manufacturing.
Loading...
Name
Phone
Organization
Use Case
Database Platform