10G APD Photodetector AT10GC Bookham(Oclaro)
The detector has a fiber tail fiber input with a speed of 10Gbps and a built-in low noise preplay.It can be used for digital optical fiber communication.The sensitivity can reach -26.5dBm and the saturation light power -1dBm.It can work in the C and L bands and output differential voltage swing 1000mVpp. The AT10GC receiver consists of an avalanche photodiode,a low-noise preamplifier and a precision NTC thermistor in a hermetic coplanar package with a connectorized single-mode fiber pigtail.Differential outputs are provided to improve noise rejection for enhanced sensitivity. It has been optimised for use in 10Gb/s metro applications,either as a discrete device or within a transponder,using NRZ modulation,with or without FEC,at data rates up to 10.709Gb/s.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Optical sensitivity BOL | typical:-26.5 dBm；max:-24.5 dBm |
| Sensitivity penalty EOL over temperature | typical:0.75 dB；max:1.0 dB |
| Deviation from linear phase [Case Temperature=25°C unless otherwise specified / DC-6GHz] | min:-10 °；max:+10 ° |
| High frequency -3dB corner f_H [Case Temperature=25°C unless otherwise specified / V_APD=V_M10 / Small signal] | min:7 GHz |
| Low frequency -3dB corner f_L [Case Temperature=25°C unless otherwise specified] | max:40 kHz |
| Transimpedance gain T_Z [Case Temperature=25°C unless otherwise specified / Small signal / Load impedance is50Ω AC-coupled with a return loss>20dB, up to20GHz. / Excludes APD responsivity. / Differential.] | min:1.1 kΩ；typical:1.4 kΩ；max:2.5 kΩ |
| Maximum output voltage V_OUT [Case Temperature=25°C unless otherwise specified / Peak-to-peak / Single ended.] | typical:500 mV；max:700 mV |
| Return loss S_22 [Case Temperature=25°C unless otherwise specified / DC to8.0GHz] | max:-8 dB |
| Optical overload P_SAT [Case Temperature=25°C unless otherwise specified / 2³¹-1 PRBS / V_APD=V_M3 / BER<10⁻¹² / Measured with9.95Gb/s, extinction ratio>12dB, Q factor>30,50% crossing level,1550nm.] | min:-3 dBm；typical:-1 dBm |
| APD breakdown voltage V_br [Case Temperature=25°C unless otherwise specified / I_APD=10µA] | min:20 V；max:40 V |
| APD breakdown voltage temperature coefficient T_Vbr [Case Temperature=25°C unless otherwise specified] | min:0.030 V/°C；max:0.061 V/°C |
| Dark current I_d [Case Temperature=25°C unless otherwise specified / At90% of V_br] | max:100 nA |
| Amplifier bias current I_ee [Case Temperature=25°C unless otherwise specified] | typical:75 mA；max:90 mA |
| Input current for output limiting I_In lim [Case Temperature=25°C unless otherwise specified / Peak-to-peak] | typical:1000 µA |
| Transimpedance amp supply voltage V_ee [Case Temperature=25°C unless otherwise specified] | typical:-5.2 V |
| Thermistor resistance R_TH [Case Temperature=25°C unless otherwise specified] | typical:10 kΩ |
| Amplifier bias voltage V_ee [Absolute Maximum Ratings; operating specification may not hold] | min:-6.0 V；max:0.5 V |
| Operating temperature T_op [Absolute Maximum Ratings; operating specification may not hold] | min:-40 °C；max:+85 °C |
| Storage temperature T_stg [Absolute Maximum Ratings; operating specification may not hold] | min:-40 °C；max:+85 °C |
| Input photocurrent I_PD [Absolute Maximum Ratings; operating specification may not hold] | max:3 mA |
| APD bias voltage V_APD [Absolute Maximum Ratings; operating specification may not hold] | min:0 V；max:Vbr |
| Fiber bend radius [Absolute Maximum Ratings; operating specification may not hold] | min:20 mm |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Stellar-PD300C,PD300C-1.5W,PD300C-3W,PD300C-UV0 Photodiode Laser Power Meter
Photodiodes
Shafan-oe
Meter Head-Power-Supply Method: USB-B interface, 5V1A phone charger Meter Head-Battery Characteristics: 3800MAH; charging time 10 hours; discharge time 24 hours Meter Head - Display: 3.5-inch true-color LCD, 480*320, multi-level backlight
LCD with Chinese/English interface; pW~W power measurement; wavelength coverage 250nm-1800nm; automatic and manual ranging; NIST traceability; convenient self-calibration; optional fiber adapters (ST, FC, LC, SC); compact design and rotating stand for easy placement
-
50um Indium Gallium Arsenide Avalanche Photodiode OAPD-X-X-P-XX-X
Photodiodes
O-send
Absolute Maximum Ratings - Storage Temperature: -55°C~+85°C Absolute Maximum Ratings - Operating temperature: -40°C~+85°C Absolute Maximum Ratings-Reverse Current [CW]: 3mA
The 50um InGaAs APD pigtail module is widely used in OTDR, CATV and optical repeater equipment.
-
75um Indium Gallium Arsenide Photodiode OPD-1-X-X-X-XX-X-X
Photodiodes
O-send
Absolute Maximum Ratings - Storage Temperature: -40°C~+100°C Absolute Maximum Ratings - Operating temperature: -40°C~+85°C Absolute Maximum Ratings - Reverse Voltage [CW]: 30V
75um InGaAs photodiodes are widely used in cable television optical reception, analog transmission, optical communications and test instruments.
-
InGaAs Photo Diode OAPD-X-X-P-XX-X
Photodiodes
O-send
21°C General Characteristics at - Wavelength Range [1550nm（ Type ）]: min:1100 nm；max:1650 nm General Characteristics at 21°C-Peak Sensitivity: 1550nm 21°C General Characteristics at - Storage Temperature: 60°C~125°C
This product is suitable for ranging optics, communication systems, optical coherence tomography and low-light detection. Sizes of 80um, 200um and 300um are available. Peak responsivity occurs at 1550nm.
-
Silicon Avalanche Photodiode OAPD-2-X-X-X-XX-X
Photodiodes
O-send
Detection Range: 400~1100nm Dark current: typical:0.2 Responsivity: min:0.40 A/W；typical:0.55 A/W
The fiber-coupled silicon avalanche photodiode couples to single-mode or multimode fiber. Various active diameters are available, including 200um and 500um. It is commonly used in telecommunications, data communications, optical communications, test instruments and OTDR.
Related Articles
The 850 nm and 940 nm infrared narrow‑bandpass filters launched by Innovation Photoelectric are core optical components specially designed for day‑and‑night security cameras. They effectively eliminate image interference during visible‑light and infrared‑illumination switching, delivering stable round‑the‑clock monitoring performance.
Shandong Optochip specializes in independent R&D of industrial-grade optical chips for optical communication and fiber sensing. Our business includes overseas chip tape-out, domestic precision device packaging
BEIJING JIEPU TREND supplies YAG+Er:YAG+YAG bonded composite slab laser crystals for high‑power solid‑state laser systems. The monolithic slab consists of two undoped YAG end‑cap layers and a central Er‑doped YAG gain segment. The overall dimension is 9 mm×9 mm×9 mm.
Founded in November 2017, TIANJIN H‑CHIP TECHNOLOGY GROUP CORPORATION is a professional manufacturing‑service provider dedicated to micro‑nano optoelectronic chips. It holds multiple prestigious qualifications, including National High‑Tech Enterprise, one of Tianjin’s first Gazelle‑certified Enterprises, Specialized‑Refined‑Differentiated‑Innovative SME, and Leading Enterprise for Strategic Emerging Industries.
Loading...
Name
Phone
Organization
Use Case
Database Platform