SCL Series SCL821
Save to Favorites
Specifications
| Parameter | Value |
|---|---|
| Power | 820 W |
| Typical luminous flux | 60,000 |
| Through hole Dimensions | 22 mm |
| Typical color temperature | 8,000 |
| Typical color rendering index (Ra) | 70 |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
UV Oven
Light-Emitting Diodes (LEDs)
Szlamplic
The Lanpulik UVLED oven/UV curing oven uses LED emission. Different power levels and wavelengths of 365nm, 385nm, 395nm and 405nm are available for curing various UV adhesives, inks, varnishes and paints.
-
Digital-Printing Ink LP358 UV LED DIGITAL INKS LED
Light-Emitting Diodes (LEDs)
Szlamplic
Fineness [GB/T13217.3-2008]: ≤0.5μm Viscosity [45℃, Rotational Viscometer]: 8-10mPa.s Inkjet Coding Speed [LED Curing at 385nm Wavelength]: 250m/min
Low odor, low migration and high adhesion. Product overview: This series contains modified epoxy resin, modified polyester resin, photoinitiators, reactive diluent, pigments, color powder and additives. Low viscosity and odor, rapid curing, good adhesion/flexibility, wear resistance and scratch resistance suit inkjet printing on PP, PE, PET and PVC films. It causes low skin irritation, produces no polluting emissions and has no migration after curing, meeting FDA 21 CFR 175.300 technical requirements. It is a new-generation environmentally friendly printing product.
-
Flexible-Printing Ink LF361 UV LED FLEXO INKS LED
Light-Emitting Diodes (LEDs)
Szlamplic
Fineness [GB/T13217.3-2008]: ≤5μm Viscosity [Rotational Viscometer]: 1000-2000mPa.s Curing speed [385nm]: 300-500mJ/cm2
LF361 UV LED FLEXO INKS. Low odor, low migration and high adhesion. Product overview: Modified epoxy resin, modified polyester resin, photoinitiators, reactive diluent, pigments, color powder and additives provide low odor, rapid curing, good adhesion, abrasion resistance and scratch resistance. Suitable substrates include PP, PE, PET, PVC, aluminized film, synthetic paper and other films. Low skin irritation, no polluting emissions and no migration after curing meet FDA 21 CFR 175.300 technical requirements, making this a new-generation environmentally friendly printing product. We worked with STARBUCKS. They tried flexographic inks from many well-known companies; only Lamplic's met their special requirements for low odor, low migration and high adhesion.
-
Mini LED Laser Repair Equipment
Light-Emitting Diodes (LEDs)
Delphilaser
This equipment repairs defective pixels in Mini LED products. Unavoidable die-bonding defects can cause dark spots, detached LEDs and nonuniform bright spots. Laser rework uses removal, cleaning, rebonding, soldering and inspection to repair specific defective positions.
-
Laser Hair Removal--Super LED Hair-Removal Module
Light-Emitting Diodes (LEDs)
Oephotonics
Power: 200-720 W Center wavelength: 808 nm Chip Quantity: 4-12 pcs
Super LED hair-removal module.
Related Articles
As a core precision optical component for wavelength screening, frequency locking and spectral demodulation, optical etalons are widely used in high-end scientific research and precision laser equipment.
As a vital emerging sector of modern three-dimensional spatial economy, the low-altitude economy has become a new global growth driver. It covers a wide range of commercial scenarios, including UAV navigation and obstacle avoidance, precise airspace management, aerial mapping, low-altitude logistics distribution, security monitoring and emergency disaster rescue. Nevertheless, frequent extreme weather, complex terrain obstacles and increasingly dense low-altitude flight activities pose severe challenges to the safety and stability of low-altitude aircraft operations.
Laser pump sources are the core energy input component of solid-state lasers and laser amplifiers, and their performance directly determines the output power, beam quality and service life of the entire laser system. In scenarios such as industrial processing, scientific research experiments and high-end equipment, improper pump source selection will not only result in substandard system performance, but also bring a series of problems such as rapid device degradation and high operation and maintenance costs. This article sorts out the core selection logic and key pitfalls of pump source procurement, and provides selection references based on mature, mass-produced high-reliability products to help purchasers efficiently screen suitable products.
Shandong Haucore Optoelectronics Co., Ltd. introduces the HGLD‑792‑COS‑D‑10WB semiconductor laser within its COS series. Delivering an output power of 10 W at a central wavelength of 792 nm, this device adopts gold‑tin bonding COS packaging. Featuring high reliability and long service life, it serves as a preferred pump source for solid‑state lasers and is widely deployed in industrial processing, laser display, medical & aesthetic treatment, scientific research and other fields.
Loading...
Name
Phone
Organization
Use Case
Database Platform