1550nm 40MHz SMF28e Fiber Coupled Acousto-Optic Modulator FCAOM-1550-40M-05-SMF28e-xx-xx-xx-xx
Save to Favorites
Specifications
| Parameter | Value |
|---|---|
| Interaction material | Tellurium Dioxide |
| Wavelength [Other wavelengths available on request] | min:1530 nm；typical:1550 nm；max:1565 nm |
| Average optical power handling | max:500 mW |
| Insertion loss | typical:2 .0 dB；max:2.5 dB |
| Extinction ratio [RF ON/RF OFF] | min:50 dB |
| Return loss [RF ON/RF OFF] | min:40 dB |
| Rise-time/fall-time [Customizable / 10%-90%] | typical:50 ns |
| Frequency | typical:40 MHz |
| VSWR | max: 1.3:1 |
| Input impedance | typical:50Ω |
| RF power [Higher RF power will cause damage] | typical:2.5 W；max:3.0W |
| RF connector | SMA |
| Frequency shift [Upshift] | typical:40 MHz |
| Fiber type | SMF28e |
| Fiber connector | FC/APC or FC/PC |
| Fiber length | typical:1.0m |
Datasheet
Supplier Information
Related Products
-
QDCxxx-yyW-zzV Series Q Driver for End-Pumped Lasers
Acousto-Optic Modulator
Shafan-oe
Output Frequency: 40.68/68/80 MHz Signal level: 3.3V TTL， Compatible with 5V TTL RF Rise time: < 35 ns
The QDC series Q-switch driver is a medium/low-power RF generator designed for acousto-optic Q-switches in end-pumped, side-pumped and other lasers, with additional RF applications. Compact construction, stable output, strong interference resistance and high cost effectiveness have supported widespread industry use and proven reliability. Multiple first-pulse suppression modes make QDC an ideal acousto-optic Q-switch source. The series is a newly designed, entirely independently developed product emphasizing reliability and cost effectiveness compared with alternatives, with stable RF output and high reliability.
-
Acousto-Optic Devices
Acousto-Optic Modulator
Uvopto
-
Acousto-Optic Devices
Acousto-Optic Modulator
Uvopto
-
Fiber Coupled Acousto-Optic Modulator AOM
Acousto-Optic Modulator
Lightcomm
Center wavelength λc [NON-PM fiber AOM]: 1030~1064 nm Typical insertion loss [NON-PM fiber AOM; Center wavelength 1030~1064nm; @23℃, λc; each connector added: IL +0.5dB; default connector key aligned to slow axis]: 1.8 dB Max. insertion loss [NON-PM fiber AOM; Center wavelength 1030~1064nm; each connector added: IL +0.5dB; default connector key aligned to slow axis]: 2.5 dB
Fiber Coupled AOM is designed for pulsed fiber laser/amplifier system applications. The AOM is installed in fiber laser cavity, laser pulses can be obtained by modulating the AOM with TTL signal.
-
Fiber Coupled Acousto-Optic Modulator PMAOM
Acousto-Optic Modulator
Lightcomm
Center wavelength λc [PM fiber AOM]: 1030~1064 nm Typical insertion loss [PM fiber AOM; Center wavelength 1030~1064nm; @23℃, λc; each connector added: IL +0.5dB; default connector key aligned to slow axis]: 1.8 dB Max. insertion loss [PM fiber AOM; Center wavelength 1030~1064nm; each connector added: IL +0.5dB; default connector key aligned to slow axis]: 2.5 dB
Fiber Coupled AOM is designed for pulsed fiber laser/amplifier system applications. The AOM is installed in fiber laser cavity, laser pulses can be obtained by modulating the AOM with TTL signal.
Related Articles
As a core precision optical component for wavelength screening, frequency locking and spectral demodulation, optical etalons are widely used in high-end scientific research and precision laser equipment.
As a vital emerging sector of modern three-dimensional spatial economy, the low-altitude economy has become a new global growth driver. It covers a wide range of commercial scenarios, including UAV navigation and obstacle avoidance, precise airspace management, aerial mapping, low-altitude logistics distribution, security monitoring and emergency disaster rescue. Nevertheless, frequent extreme weather, complex terrain obstacles and increasingly dense low-altitude flight activities pose severe challenges to the safety and stability of low-altitude aircraft operations.
Laser pump sources are the core energy input component of solid-state lasers and laser amplifiers, and their performance directly determines the output power, beam quality and service life of the entire laser system. In scenarios such as industrial processing, scientific research experiments and high-end equipment, improper pump source selection will not only result in substandard system performance, but also bring a series of problems such as rapid device degradation and high operation and maintenance costs. This article sorts out the core selection logic and key pitfalls of pump source procurement, and provides selection references based on mature, mass-produced high-reliability products to help purchasers efficiently screen suitable products.
Shandong Haucore Optoelectronics Co., Ltd. introduces the HGLD‑792‑COS‑D‑10WB semiconductor laser within its COS series. Delivering an output power of 10 W at a central wavelength of 792 nm, this device adopts gold‑tin bonding COS packaging. Featuring high reliability and long service life, it serves as a preferred pump source for solid‑state lasers and is widely deployed in industrial processing, laser display, medical & aesthetic treatment, scientific research and other fields.
Loading...
Name
Phone
Organization
Use Case
Database Platform