1435nm Wavelength Single-mode Fiber Coupling Laser
The 1435 nm-band semiconductor laser source with single-mode fiber output uses a high-performance butterfly semiconductor laser. Purpose-designed drive and temperature-control circuits ensure safe, stable laser operation. Benchtop and module packages are available.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Operating Wavelength [1425/1435/1465 optional] | typical:1455 nm |
| Wavelength Accuracy [FBG wavelength locking] | typical:±3 nm |
| Operating mode [Continuous-wave light] | CW |
| Output Power [Customizable] | typical:200/350/500 |
| Power adjustment Range | typical:10%~100% |
| Short-term Stability [Equivalent ≤±0.5% / 15 minutes] | typical:≤ ±0.02 |
| Long-term Stability [Equivalent ≤±1.2% / 8 hours] | typical:≤ ±0.05 |
| Polarization state [Fiber Type ：SMF-28] | Random (high PER) |
| Polarization state [Fiber Type ：PM1550] | Linear polarization |
| Fiber Type [Polarization state: random (High PER)] | SMF-28 |
| Fiber Type [Polarization state ： Linear polarization] | PM1550 |
| Fiber connector [Polarization state: random (High PER) / Fiber type:SMF-28] | FC/APC |
| Fiber connector [Polarization state ： Linear polarization / Fiber Type ：PM1550 / Slow axis Alignment] | FC/APC( Slow axis Alignment ） |
| Control Method [Benchtop] | Touchscreen / RS232 serial communication |
| Control Method [Module] | RS232 serial communication |
| Communication Interface [Benchtop] | DB9 female connector |
| Communication Interface [Module] | DB9 female connector |
| Power supply [Benchtop] | AC 100~240V , 30W |
| Power supply [Module] | DC 5V, 15W |
| Dimensions [Benchtop] | 255(W)×285(D)×115(H)mm |
| Dimensions [Module] | 125(W)×150(D)×20(H)mm |
| Operating Temperature | -5~+35°C |
| Operating Humidity | 0~70% |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
JX-130 Ribbon Fiber Aligner
Optical Fibers
Jxcmc
Applicable Optical fiber: 12-Core Ribbon Fiber Fiber diameter: 125μm Core-Alignment Loss [Single Fiber]: Single-Fiber Loss No Greater Than 0.3dB
-
JX-150 Single-Fiber V-Groove Aligner
Optical Fibers
Jxcmc
Applicable Optical fiber: Single-core Single-mode 、 Multimode Silica fiber Fiber diameter: 125μm Core-Alignment Loss [Single Fiber; Same Single-Mode Fiber]: Single-fiber loss no greater than 0.5dB (same single-mode fiber)
-
JX-160A Single-Fiber Aligner
Optical Fibers
Jxcmc
Applicable Optical fiber: Single-core Optical fiber Fiber diameter: 125μm Core-Alignment Loss: ≤0.05dB
-
JX-160A(400μm) Fiber Aligner
Optical Fibers
Jxcmc
-
JX-160A(530μm) Fiber Aligner
Optical Fibers
Jxcmc
Related Articles
As a core precision optical component for wavelength screening, frequency locking and spectral demodulation, optical etalons are widely used in high-end scientific research and precision laser equipment.
As a vital emerging sector of modern three-dimensional spatial economy, the low-altitude economy has become a new global growth driver. It covers a wide range of commercial scenarios, including UAV navigation and obstacle avoidance, precise airspace management, aerial mapping, low-altitude logistics distribution, security monitoring and emergency disaster rescue. Nevertheless, frequent extreme weather, complex terrain obstacles and increasingly dense low-altitude flight activities pose severe challenges to the safety and stability of low-altitude aircraft operations.
Laser pump sources are the core energy input component of solid-state lasers and laser amplifiers, and their performance directly determines the output power, beam quality and service life of the entire laser system. In scenarios such as industrial processing, scientific research experiments and high-end equipment, improper pump source selection will not only result in substandard system performance, but also bring a series of problems such as rapid device degradation and high operation and maintenance costs. This article sorts out the core selection logic and key pitfalls of pump source procurement, and provides selection references based on mature, mass-produced high-reliability products to help purchasers efficiently screen suitable products.
Shandong Haucore Optoelectronics Co., Ltd. introduces the HGLD‑792‑COS‑D‑10WB semiconductor laser within its COS series. Delivering an output power of 10 W at a central wavelength of 792 nm, this device adopts gold‑tin bonding COS packaging. Featuring high reliability and long service life, it serves as a preferred pump source for solid‑state lasers and is widely deployed in industrial processing, laser display, medical & aesthetic treatment, scientific research and other fields.
Loading...
Name
Phone
Organization
Use Case
Database Platform