Ultrahigh-sensitivity spectrometer SR100Q
Jianzhi Technology's research CCD fiber spectrometers are designed for weak-signal detection. A deeply cooled research camera improves sensitivity and signal-to-noise ratio. Advanced high-resolution optics and FPGA-based low-noise, high-rate signal processing provide excellent spectra and stable, reliable performance, making these instruments suitable for weak-light detection. Spectral coverage supports ultraviolet, visible and near-infrared fluorescence, absorption and Raman spectroscopy. SR100Q uses a 1044*128-pixel cooled research area sensor with 24*24μm pixels, 4 times the area of ordinary pixels, and quantum efficiency up to 92%. SR150S has a focal length of 150mm, cooling down to minus 70℃ and very low dark current for long exposures. Its compact structure supports laboratory measurements and industrial integration.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Chip | Cooled back-illuminated area-array detector, Hamamatsu S7031 |
| Main unit dimensions | 180 mm (length)×120 mm (width)×50 mm (height) |
| Main unit weight | 1200g |
| Focal Length | ≤100mm |
| Data Output Interface | USB3.0、RS232、RS485、20pin Connectors |
| Power supply | 5V |
| Operating Current | <3.5A |
| Entrance slit | 10μm，25μm，50μm，100μm，200μm |
| Fiber interface | SMA905， Free space |
| ADC Bit depth | 16bit |
| Operating Temperature | -20℃~ 60℃ |
| Storage temperature | -30℃~ 70 ℃ |
| Relative humidity | 0~90%RH |
Applications
Key Features
Datasheet
Supplier Information
Related Products
-
FP-Cavity Scanning Fabry-Pérot Interferometer-DP-SFPIX Spectrometer and FP-Cavity Driver Module
Spectrometers
Dospectrum
Overall dimensions: 200mmX200mmX100mm Voltage / Power consumption: DC15V/W High-Voltage Output Range: 1~60V
-
FP-Cavity Scanning Fabry-Pérot Interferometer-SFPI-1200A(DP) Spectrometer
Spectrometers
Dospectrum
Wavelength Range: 1275~2000nm Free Spectral Range: 1.5GHz Cavity Finesse [Typical 250]: >200( Typical 250)
-
FP-Cavity Scanning Fabry-Pérot Interferometer-SFPI-800A(DP) Spectrometer
Spectrometers
Dospectrum
Wavelength Range: 875~1275nm Free Spectral Range: 1.5GHz Cavity Finesse [Typical 250]: >200( Typical 250)
-
FP-Cavity Scanning Fabry-Pérot Interferometer-SFPI-300A(DP) Spectrometer
Spectrometers
Dospectrum
Wavelength Range: 300~535nm Free Spectral Range: 1.5GHz Cavity Finesse [Typical 250]: >200( Typical 250)
-
FP-Cavity Scanning Fabry-Pérot Interferometer-SFPI-500A(DP) Spectrometer
Spectrometers
Dospectrum
Wavelength Range: 535~820nm Free Spectral Range: 1.5GHz Cavity Finesse [Typical 250]: >200( Typical 250)
Related Articles
As a core precision optical component for wavelength screening, frequency locking and spectral demodulation, optical etalons are widely used in high-end scientific research and precision laser equipment.
As a vital emerging sector of modern three-dimensional spatial economy, the low-altitude economy has become a new global growth driver. It covers a wide range of commercial scenarios, including UAV navigation and obstacle avoidance, precise airspace management, aerial mapping, low-altitude logistics distribution, security monitoring and emergency disaster rescue. Nevertheless, frequent extreme weather, complex terrain obstacles and increasingly dense low-altitude flight activities pose severe challenges to the safety and stability of low-altitude aircraft operations.
Laser pump sources are the core energy input component of solid-state lasers and laser amplifiers, and their performance directly determines the output power, beam quality and service life of the entire laser system. In scenarios such as industrial processing, scientific research experiments and high-end equipment, improper pump source selection will not only result in substandard system performance, but also bring a series of problems such as rapid device degradation and high operation and maintenance costs. This article sorts out the core selection logic and key pitfalls of pump source procurement, and provides selection references based on mature, mass-produced high-reliability products to help purchasers efficiently screen suitable products.
Shandong Haucore Optoelectronics Co., Ltd. introduces the HGLD‑792‑COS‑D‑10WB semiconductor laser within its COS series. Delivering an output power of 10 W at a central wavelength of 792 nm, this device adopts gold‑tin bonding COS packaging. Featuring high reliability and long service life, it serves as a preferred pump source for solid‑state lasers and is widely deployed in industrial processing, laser display, medical & aesthetic treatment, scientific research and other fields.
Loading...
Name
Phone
Organization
Use Case
Database Platform