Miniature fiber optic spectrometer SR50C
Jianzhi Technology's general-purpose compact fiber spectrometers combine small size, high performance, cost efficiency and versatility. They support common spectral measurement systems for reflectance, transmission and absorption over 200~1100nm. High-quality blazed diffraction gratings and advanced optical design provide high throughput and improved weak-signal detection. Different grating groove densities support high-resolution ultraviolet, visible and near-infrared spectroscopy. A 2048-pixel, high-quantum-efficiency CMOS sensor and professional high-speed, low-noise acquisition and processing circuits provide an excellent spectral signal-to-noise ratio. An integrated temperature sensor and internal compensation algorithm reduce temperature drift across the operating range. SR50C uses a crossed C-T optical configuration for high sensitivity. SR75C uses a 75mm focal-length mirror and M-type C-T design to control optical aberration and resolution.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Main unit dimensions | 79 mm (length)×68 mm (width)×42 mm (height) |
| Main unit weight | 220g |
| Focal Length | ≤50mm |
| Chip type | Linear-array CMOS, Hamamatsu S11639 |
| Entrance slit | 10μm，25μm，50μm，100μm，200μm |
| Fiber interface | SMA905， Free space |
| ADC Bit depth | 16bit |
| Power supply [type @5V；@5V)] | DC 4.5V to 5.5V (type @5V) |
| Operating Current | < 500mA |
| Operating Temperature | 10 ~ 40 ℃ |
| Storage temperature | -20 ~ 60 ℃ |
| Relative humidity | 0~90%RH |
| Equipment power | 50 W |
| Warm-up time | ＜5 min |
| Communication Protocol | Modbus |
Applications
Key Features
Datasheet
Supplier Information
Related Products
-
FP-Cavity Scanning Fabry-Pérot Interferometer-DP-SFPIX Spectrometer and FP-Cavity Driver Module
Spectrometers
Dospectrum
Overall dimensions: 200mmX200mmX100mm Voltage / Power consumption: DC15V/W High-Voltage Output Range: 1~60V
-
FP-Cavity Scanning Fabry-Pérot Interferometer-SFPI-1200A(DP) Spectrometer
Spectrometers
Dospectrum
Wavelength Range: 1275~2000nm Free Spectral Range: 1.5GHz Cavity Finesse [Typical 250]: >200( Typical 250)
-
FP-Cavity Scanning Fabry-Pérot Interferometer-SFPI-800A(DP) Spectrometer
Spectrometers
Dospectrum
Wavelength Range: 875~1275nm Free Spectral Range: 1.5GHz Cavity Finesse [Typical 250]: >200( Typical 250)
-
FP-Cavity Scanning Fabry-Pérot Interferometer-SFPI-300A(DP) Spectrometer
Spectrometers
Dospectrum
Wavelength Range: 300~535nm Free Spectral Range: 1.5GHz Cavity Finesse [Typical 250]: >200( Typical 250)
-
FP-Cavity Scanning Fabry-Pérot Interferometer-SFPI-500A(DP) Spectrometer
Spectrometers
Dospectrum
Wavelength Range: 535~820nm Free Spectral Range: 1.5GHz Cavity Finesse [Typical 250]: >200( Typical 250)
Related Articles
As a core precision optical component for wavelength screening, frequency locking and spectral demodulation, optical etalons are widely used in high-end scientific research and precision laser equipment.
As a vital emerging sector of modern three-dimensional spatial economy, the low-altitude economy has become a new global growth driver. It covers a wide range of commercial scenarios, including UAV navigation and obstacle avoidance, precise airspace management, aerial mapping, low-altitude logistics distribution, security monitoring and emergency disaster rescue. Nevertheless, frequent extreme weather, complex terrain obstacles and increasingly dense low-altitude flight activities pose severe challenges to the safety and stability of low-altitude aircraft operations.
Laser pump sources are the core energy input component of solid-state lasers and laser amplifiers, and their performance directly determines the output power, beam quality and service life of the entire laser system. In scenarios such as industrial processing, scientific research experiments and high-end equipment, improper pump source selection will not only result in substandard system performance, but also bring a series of problems such as rapid device degradation and high operation and maintenance costs. This article sorts out the core selection logic and key pitfalls of pump source procurement, and provides selection references based on mature, mass-produced high-reliability products to help purchasers efficiently screen suitable products.
Shandong Haucore Optoelectronics Co., Ltd. introduces the HGLD‑792‑COS‑D‑10WB semiconductor laser within its COS series. Delivering an output power of 10 W at a central wavelength of 792 nm, this device adopts gold‑tin bonding COS packaging. Featuring high reliability and long service life, it serves as a preferred pump source for solid‑state lasers and is widely deployed in industrial processing, laser display, medical & aesthetic treatment, scientific research and other fields.
Loading...
Name
Phone
Organization
Use Case
Database Platform