Dual-wavelength Raman spectrometer RS3200
The Jianzhi Technology RS3200 dual-wavelength Raman spectrometer provides rapid, nondestructive chemical analysis with high sensitivity, high signal-to-noise ratio, low fluorescence and high stability. RS3200 uses patented sequential dual-wavelength excitation in the near infrared to combine broad spectral coverage with high resolution. A built-in transmission-grating spectrometer, a research camera deeply cooled to -70℃ and multicore-fiber collection provide very high sensitivity for chemical analysis, materials research and related measurements.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Excitation wavelength | 730nm & 830nm Dual wavelength |
| Output Power | <500mw |
| Spectral Range | 100-3900cm⁻¹ |
| Resolution [50μm Slit] | Better than 6cm⁻¹（50μm Slit ） |
| Main unit weight | Less than 20kg |
| Wavelength Stability | Better than 0.01nm |
| Detector | Research-grade deeply cooled camera |
| Spectrometer | Transmissive high-throughput spectrometer |
| Software Function | Spectrum acquisition, spectral data processing, spectrum comparison and equipment calibration |
| Operating Temperature | 0-40℃ |
| Storage temperature | -20-55℃ |
| Data output format | SPC, txt, prn and other formats available |
| Power supply | 100-240 VAC，50-60HZ |
Applications
Key Features
Datasheet
Supplier Information
Related Products
-
FP-Cavity Scanning Fabry-Pérot Interferometer-DP-SFPIX Spectrometer and FP-Cavity Driver Module
Spectrometers
Dospectrum
Overall dimensions: 200mmX200mmX100mm Voltage / Power consumption: DC15V/W High-Voltage Output Range: 1~60V
-
FP-Cavity Scanning Fabry-Pérot Interferometer-SFPI-1200A(DP) Spectrometer
Spectrometers
Dospectrum
Wavelength Range: 1275~2000nm Free Spectral Range: 1.5GHz Cavity Finesse [Typical 250]: >200( Typical 250)
-
FP-Cavity Scanning Fabry-Pérot Interferometer-SFPI-800A(DP) Spectrometer
Spectrometers
Dospectrum
Wavelength Range: 875~1275nm Free Spectral Range: 1.5GHz Cavity Finesse [Typical 250]: >200( Typical 250)
-
FP-Cavity Scanning Fabry-Pérot Interferometer-SFPI-300A(DP) Spectrometer
Spectrometers
Dospectrum
Wavelength Range: 300~535nm Free Spectral Range: 1.5GHz Cavity Finesse [Typical 250]: >200( Typical 250)
-
FP-Cavity Scanning Fabry-Pérot Interferometer-SFPI-500A(DP) Spectrometer
Spectrometers
Dospectrum
Wavelength Range: 535~820nm Free Spectral Range: 1.5GHz Cavity Finesse [Typical 250]: >200( Typical 250)
Related Articles
As a core precision optical component for wavelength screening, frequency locking and spectral demodulation, optical etalons are widely used in high-end scientific research and precision laser equipment.
As a vital emerging sector of modern three-dimensional spatial economy, the low-altitude economy has become a new global growth driver. It covers a wide range of commercial scenarios, including UAV navigation and obstacle avoidance, precise airspace management, aerial mapping, low-altitude logistics distribution, security monitoring and emergency disaster rescue. Nevertheless, frequent extreme weather, complex terrain obstacles and increasingly dense low-altitude flight activities pose severe challenges to the safety and stability of low-altitude aircraft operations.
Laser pump sources are the core energy input component of solid-state lasers and laser amplifiers, and their performance directly determines the output power, beam quality and service life of the entire laser system. In scenarios such as industrial processing, scientific research experiments and high-end equipment, improper pump source selection will not only result in substandard system performance, but also bring a series of problems such as rapid device degradation and high operation and maintenance costs. This article sorts out the core selection logic and key pitfalls of pump source procurement, and provides selection references based on mature, mass-produced high-reliability products to help purchasers efficiently screen suitable products.
Shandong Haucore Optoelectronics Co., Ltd. introduces the HGLD‑792‑COS‑D‑10WB semiconductor laser within its COS series. Delivering an output power of 10 W at a central wavelength of 792 nm, this device adopts gold‑tin bonding COS packaging. Featuring high reliability and long service life, it serves as a preferred pump source for solid‑state lasers and is widely deployed in industrial processing, laser display, medical & aesthetic treatment, scientific research and other fields.
Loading...
Name
Phone
Organization
Use Case
Database Platform