Visible Wavelength Combiner
LightComm’s Visible Wavelength Combiners are single mode optical fiber components and modules. They enable any two or three primary colours in the visible wavelength region to be combined or separated. Combiners are available for either 2 or 3 wavelengths: 2 wavelength combiners combine red/green, blue/green or red/blue. 3 wavelength combiners provide full RGB operation; enabling full colour displays.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Two wavelength combiner [The specifications are without connector.] | Red/Green, Red/Blue, Green/Blue |
| Operating wavelength [Two wavelength combiner; Red; The specifications are without connector.] | 630,633,655 nm |
| Operating wavelength [Two wavelength combiner; Green; The specifications are without connector.] | 532 nm |
| Operating wavelength [Two wavelength combiner; Blue; The specifications are without connector.] | 457,473,488 nm |
| Typical combine efficiency [The specifications are without connector. Two wavelength combiner; The combine efficiency may different from the table value due to different wavelengths.] | 95% |
| Minimum combine efficiency [The specifications are without connector. Two wavelength combiner; The combine efficiency may different from the table value due to different wavelengths.] | 90% |
| Fiber type [The specifications are without connector. Two wavelength combiner] | Specialty single mode fiber |
| Dimensions(Ф×L) [Two wavelength combiner; bare fiber; The specifications are without connector.] | 3 mm × 54 mm |
| Dimensions(Ф×L) [Two wavelength combiner; 0.9mm loose tube; The specifications are without connector.] | 3 mm × 60 mm |
| Operating / storage temperature range [Two wavelength combiner; The specifications are without connector.] | -40~85 ℃ |
| Three wavelength combiner [The specifications are without connector.] | 655/532/473 |
| Typical combine efficiency [The specifications are without connector. Three wavelength combiner; Red and Green; The combine efficiency may different from the table value due to different wavelengths.] | 75% |
| Minimum combine efficiency [The specifications are without connector. Three wavelength combiner; Red and Green; The combine efficiency may different from the table value due to different wavelengths.] | 70% |
| Typical combine efficiency [The specifications are without connector. Three wavelength combiner; blue; The combine efficiency may different from the table value due to different wavelengths.] | 90% |
| Minimum combine efficiency [The specifications are without connector. Three wavelength combiner; blue; The combine efficiency may different from the table value due to different wavelengths.] | 85% |
| Fiber type [The specifications are without connector. Three wavelength combiner] | Specialty single mode fiber |
| Housing box(L×W×H) [The specifications are without connector. Three wavelength combiner] | 100 mm × 80 mm × 10 mm |
| Operating / storage temperature range [The specifications are without connector. Three wavelength combiner] | -40~85 ℃ |
Applications
Key Features
Datasheet
Supplier Information
Related Products
-
2x1 105 0.15 105 0.22
Fiber Combiners
Lightcomm
Pump Operating Wavelength [Parameters above are specified at room temperature.]: Min:800 nm；Typ:915 nm；Max:1000 nm Pump Fiber-Core Diameter [Parameters above are specified at room temperature. Refer to fiber codes]: 105 μm Pump Fiber-Cladding Diameter [Parameters above are specified at room temperature. Refer to fiber codes]: 125 μm
This 2×1 multi-mode fiber combiner is designed for high power fiber laser application. It combines two pump lasers into one multi-mode output fiber. Fiber type can be customized.
-
Fused Polarization Combiner
Fiber Combiners
Lightcomm
Port type [The specifications are without connectors.]: 2 X 1 Fiber type [The specifications are without connectors.]: PM panda fiber Pigtail type [The specifications are without connectors.]: 250um bare fiber
LightComm uses unique fusing technique and polarization maintaining fiber to build the fused polarization combiner. The wavelength could be selected according to customer’s request. It features low excess loss, small size and high power handling. Fused Polarization Cominer is widely used for EDFA,
-
Mode Field Adaptor (MFA) - Backward version
Fiber Combiners
Lightcomm
Signal Input Fiber [Backward version;Signal Output Fiber:HI1060 or6/125 DCF,0.14NA]: 10/125 DCF or SCF,0.08NA Signal Output Fiber [Backward version;Signal Input Fiber:10/125 DCF or SCF,0.08NA]: HI1060 or6/125 DCF,0.14NA Signal Insertion Loss [Backward version;Signal Input Fiber:10/125 DCF or SCF,0.08NA;Signal Output Fiber:HI1060 or6/125 DCF,0.14NA;The signal loss means the fundamental mode signal loss. High order modes are forbidden.]: =<0.5 dB
This1×1 Mode Field Adaptor is designed for high power fiber laser application. It connects two different fibers with different NA and core diameter,as well as cladding,to keep mode field diameter matched with low fundamental mode signal loss and minimal degradation of beam quality (M²). Fiber types can be customized.
-
Mode Field Adaptor (MFA) - Forward version
Fiber Combiners
Lightcomm
Signal Input Fiber [Forward version;Signal Output Fiber:10/125 DCF or SCF,0.08NA]: HI1060 or6/125 DCF,0.14NA Signal Output Fiber [Forward version;Signal Input Fiber:HI1060 or6/125 DCF,0.14NA]: 10/125 DCF or SCF,0.08NA Signal Insertion Loss [Forward version;Signal Input Fiber:HI1060 or6/125 DCF,0.14NA;Signal Output Fiber:10/125 DCF or SCF,0.08NA;The signal loss means the fundamental mode signal loss.]: =<0.3 dB
This1×1 Mode Field Adaptor is designed for high power fiber laser application. It connects two different fibers with different NA and core diameter,as well as cladding,to keep mode field diameter matched with low fundamental mode signal loss and minimal degradation of beam quality (M²). Fiber types can be customized.
-
Fiber Combiner
Fiber Combiners
Bogaolaser
Fiber type [Broadband Fiber Combiner]: Single-mode 、 Single-mode Polarization-maintaining 、 Multimode Optical fiber Fiber type [Fiber Combiner]: Single-mode Optical fiber Fiber type [Fiber Combiner]: Multimode Optical fiber
Fiber combiners combine multiple energy inputs into a single fiber output. Our combiners can use different fibers to suit actual requirements.
Related Articles
Fomoptic delivers integrated one‑stop optical solutions covering precision optical fabrication and custom vacuum coating services. Supported by complete processing production lines, comprehensive metrology equipment and experienced engineering team, we provide full‑chain customized components, ranging from blank shaping, ultra‑precision polishing to thin‑film coating, for laser systems, infrared imaging, industrial optics and scientific‑research projects.
Fiber lasers and fiber amplification systems require excitation sources with stable wavelength, narrow spectral linewidth and consistent output power.
For pulsed laser and full-spectrum optical testing, photodiodes and thermopiles have inherent drawbacks. Photodiodes show weak response in infrared band, while thermopiles feature slow response and cannot capture nanosecond narrow pulses.
As a professional ultraviolet‑laser solution provider, Precilasers has launched its 266 nm narrow‑linewidth industrial laser, delivering reliable single‑frequency output for high‑precision interference lithography, semiconductor inspection and precision metrology applications.
Loading...
Name
Phone
Organization
Use Case
Database Platform