Mode Field Adaptor (MFA) - Backward version
This1×1 Mode Field Adaptor is designed for high power fiber laser application. It connects two different fibers with different NA and core diameter,as well as cladding,to keep mode field diameter matched with low fundamental mode signal loss and minimal degradation of beam quality (M²). Fiber types can be customized.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Signal Input Fiber [Backward version;Signal Output Fiber:HI1060 or6/125 DCF,0.14NA] | 10/125 DCF or SCF,0.08NA |
| Signal Output Fiber [Backward version;Signal Input Fiber:10/125 DCF or SCF,0.08NA] | HI1060 or6/125 DCF,0.14NA |
| Signal Insertion Loss [Backward version;Signal Input Fiber:10/125 DCF or SCF,0.08NA;Signal Output Fiber:HI1060 or6/125 DCF,0.14NA;The signal loss means the fundamental mode signal loss. High order modes are forbidden.] | =<0.5 dB |
| Signal Input Fiber [Backward version;Signal Output Fiber:HI1060 or6/125 DCF,0.14NA] | 15/125 DCF or SCF,0.08NA |
| Signal Output Fiber [Backward version;Signal Input Fiber:15/125 DCF or SCF,0.08NA] | HI1060 or6/125 DCF,0.14NA |
| Signal Insertion Loss [Backward version;Signal Input Fiber:15/125 DCF or SCF,0.08NA;Signal Output Fiber:HI1060 or6/125 DCF,0.14NA;The signal loss means the fundamental mode signal loss. High order modes are forbidden.] | =<0.7 dB |
| Signal Input Fiber [Backward version;Signal Output Fiber:HI1060 or6/125 DCF,0.14NA] | 20/125 DCF or SCF,0.08NA |
| Signal Output Fiber [Backward version;Signal Input Fiber:20/125 DCF or SCF,0.08NA] | HI1060 or6/125 DCF,0.14NA |
| Signal Insertion Loss [Backward version;Signal Input Fiber:20/125 DCF or SCF,0.08NA;Signal Output Fiber:HI1060 or6/125 DCF,0.14NA;The signal loss means the fundamental mode signal loss. High order modes are forbidden.] | =<0.7 dB |
| Signal Input Fiber [Backward version;Signal Output Fiber:HI1060 or6/125 DCF,0.14NA] | 20/400 DCF or SCF,0.06NA |
| Signal Output Fiber [Backward version;Signal Input Fiber:20/400 DCF or SCF,0.06NA] | HI1060 or6/125 DCF,0.14NA |
| Signal Insertion Loss [Backward version;Signal Input Fiber:20/400 DCF or SCF,0.06NA;Signal Output Fiber:HI1060 or6/125 DCF,0.14NA;The signal loss means the fundamental mode signal loss. High order modes are forbidden.] | =<0.7 dB |
| Signal Input Fiber [Backward version;Signal Output Fiber:10/125 DCF,0.08NA] | 15/125 DCF,0.08NA |
| Signal Output Fiber [Backward version;Signal Input Fiber:15/125 DCF,0.08NA] | 10/125 DCF,0.08NA |
| Signal Insertion Loss [Backward version;Signal Input Fiber:15/125 DCF,0.08NA;Signal Output Fiber:10/125 DCF,0.08NA;The signal loss means the fundamental mode signal loss. High order modes are forbidden.] | =<0.7 dB |
| Signal Input Fiber [Backward version;Signal Output Fiber:10/125 DCF,0.08NA] | 20/125 DCF,0.08NA |
| Signal Output Fiber [Backward version;Signal Input Fiber:20/125 DCF,0.08NA] | 10/125 DCF,0.08NA |
| Signal Insertion Loss [Backward version;Signal Input Fiber:20/125 DCF,0.08NA;Signal Output Fiber:10/125 DCF,0.08NA;The signal loss means the fundamental mode signal loss. High order modes are forbidden.] | =<0.7 dB |
| Signal Input Fiber [Backward version;Signal Output Fiber:10/125 DCF,0.08NA] | 25/250 DCF,0.06NA |
| Signal Output Fiber [Backward version;Signal Input Fiber:25/250 DCF,0.06NA] | 10/125 DCF,0.08NA |
| Signal Insertion Loss [Backward version;Signal Input Fiber:25/250 DCF,0.06NA;Signal Output Fiber:10/125 DCF,0.08NA;The signal loss means the fundamental mode signal loss. High order modes are forbidden.] | =<0.7 dB |
| Signal Input Fiber [Backward version;Signal Output Fiber:10/125 DCF,0.08NA] | 30/250 DCF,0.06NA |
| Signal Output Fiber [Backward version;Signal Input Fiber:30/250 DCF,0.06NA] | 10/125 DCF,0.08NA |
| Signal Insertion Loss [Backward version;Signal Input Fiber:30/250 DCF,0.06NA;Signal Output Fiber:10/125 DCF,0.08NA;The signal loss means the fundamental mode signal loss. High order modes are forbidden.] | =<0.7 dB |
| Signal Input Fiber [Backward version;Signal Output Fiber:SM98-PR-U25A (PM)] | 10/125 PM DCF or SCF |
| Signal Output Fiber [Backward version;Signal Input Fiber:10/125 PM DCF or SCF] | SM98-PR-U25A (PM) |
| Signal Insertion Loss [Backward version;Signal Input Fiber:10/125 PM DCF or SCF;Signal Output Fiber:SM98-PR-U25A (PM);The signal loss means the fundamental mode signal loss. High order modes are forbidden.] | =<0.5 dB |
| Signal Input Fiber [Backward version;Signal Output Fiber:SM98-PR-U25A (PM)] | 20/125 PM DCF or SCF |
| Signal Output Fiber [Backward version;Signal Input Fiber:20/125 PM DCF or SCF] | SM98-PR-U25A (PM) |
| Signal Insertion Loss [Backward version;Signal Input Fiber:20/125 PM DCF or SCF;Signal Output Fiber:SM98-PR-U25A (PM);The signal loss means the fundamental mode signal loss. High order modes are forbidden.] | =<0.7 dB |
| ER [PM fiber MFA] | ≥18dB |
| Output Beam M² [Backward version] | Max:1.3 |
| Fiber Length [Backward version;Each port] | Min:0.8 m |
| Operating Environment Temperature [Backward version] | Min:-5 °C；Max:+70 °C |
| Operating Humidity [Backward version;Not recommended under high humidity.] | Min:5 %RH；Max:95 %RH |
| Storage Temperature [Backward version] | Min:-40 °C；Max:+85 °C |
| Package [Backward version;Refer to drawing. For backward version,handling power depends on mode distribution in input fiber.High order modes are forbidden.] | C1,C4 |
| Package dimensions [Backward version;C1] | 50 mm × 5 mm × 5 mm |
| Package dimensions [Backward version;C4] | 70 mm × 12 mm × 8 mm |
Key Features
Datasheet
Supplier Information
Related Products
-
2x1 105 0.15 105 0.22
Fiber Combiners
Lightcomm
Pump Operating Wavelength [Parameters above are specified at room temperature.]: Min:800 nm；Typ:915 nm；Max:1000 nm Pump Fiber-Core Diameter [Parameters above are specified at room temperature. Refer to fiber codes]: 105 μm Pump Fiber-Cladding Diameter [Parameters above are specified at room temperature. Refer to fiber codes]: 125 μm
This 2×1 multi-mode fiber combiner is designed for high power fiber laser application. It combines two pump lasers into one multi-mode output fiber. Fiber type can be customized.
-
Fused Polarization Combiner
Fiber Combiners
Lightcomm
Port type [The specifications are without connectors.]: 2 X 1 Fiber type [The specifications are without connectors.]: PM panda fiber Pigtail type [The specifications are without connectors.]: 250um bare fiber
LightComm uses unique fusing technique and polarization maintaining fiber to build the fused polarization combiner. The wavelength could be selected according to customer’s request. It features low excess loss, small size and high power handling. Fused Polarization Cominer is widely used for EDFA,
-
Mode Field Adaptor (MFA) - Forward version
Fiber Combiners
Lightcomm
Signal Input Fiber [Forward version;Signal Output Fiber:10/125 DCF or SCF,0.08NA]: HI1060 or6/125 DCF,0.14NA Signal Output Fiber [Forward version;Signal Input Fiber:HI1060 or6/125 DCF,0.14NA]: 10/125 DCF or SCF,0.08NA Signal Insertion Loss [Forward version;Signal Input Fiber:HI1060 or6/125 DCF,0.14NA;Signal Output Fiber:10/125 DCF or SCF,0.08NA;The signal loss means the fundamental mode signal loss.]: =<0.3 dB
This1×1 Mode Field Adaptor is designed for high power fiber laser application. It connects two different fibers with different NA and core diameter,as well as cladding,to keep mode field diameter matched with low fundamental mode signal loss and minimal degradation of beam quality (M²). Fiber types can be customized.
-
Fiber Combiner
Fiber Combiners
Bogaolaser
Fiber type [Broadband Fiber Combiner]: Single-mode 、 Single-mode Polarization-maintaining 、 Multimode Optical fiber Fiber type [Fiber Combiner]: Single-mode Optical fiber Fiber type [Fiber Combiner]: Multimode Optical fiber
Fiber combiners combine multiple energy inputs into a single fiber output. Our combiners can use different fibers to suit actual requirements.
Related Articles
For pulsed laser and full-spectrum optical testing, photodiodes and thermopiles have inherent drawbacks. Photodiodes show weak response in infrared band, while thermopiles feature slow response and cannot capture nanosecond narrow pulses.
Driven by the rapid upgrading of intelligent vehicles, optoelectronic sensing technologies represented by laser sensing and infrared thermal imaging have become core pillars for high-level autonomous driving and smart cockpit iteration. Leveraging automotive-grade optoelectronic R&D advantages, Pilot Technology Group launches the VITAL intelligent vehicle solution. By integrating high-power VCSEL laser chips and vehicle infrared night-vision thermal imagers, the system comprehensively enhances vehicle environmental perception and realizes safer, smarter and more comfortable driving experiences.
As premium broadband light sources situated between traditional LEDs and laser diodes, MicroLight superluminescent‑diode (SLD) products combine broad spectral bandwidth, sufficient optical output power and low‑coherence performance.
Driven by worldwide energy‑structure transformation, the lithium‑ion battery industry is expanding rapidly as green, high‑efficiency energy‑storage devices gain surging global market demand. With years‑long dedication to intelligent manufacturing, Han’s Laser Lithium‑battery Intelligent Equipment has accumulated solid R&D strength and rich practical experience. By integrating multiple cutting‑edge technologies, the company delivers high‑efficiency, eco‑friendly and sustainable lithium‑ion battery production lines, bringing revolutionary upgrades to the new‑energy battery sector.
Loading...
Name
Phone
Organization
Use Case
Database Platform