Polarization Maintaining Optical Switch
Save to Favorites
Specifications
| Parameter | Value |
|---|---|
| Wavelength range | 1260~1360 or 1510~1610 |
| Switch type | Latching / Non-Latching |
| Insertion loss [IL is 0.3dB (1310~1550nm) higher for each connector added.] | ≤0.65 dB |
| WDL | ≤0.20 dB |
| Extinction ratio [ER is 2dB lower for each connector added.] | ≥20 dB |
| Return loss [RL is 5dB lower for each connector added.] | ≥50 dB |
| Cross talk | ≥55 dB |
| Repeatability | ≤±0.03 dB |
| Switching speed | ≤10 ms |
| Operating voltage [VDC] | 5 V |
| Durability | >10⁸ |
| Operating current [Latching] | 40 mA |
| Coil resistance [Latching] | 125 Ω |
| Operating current [Non-Latching] | 28.1 mA |
| Coil resistance [Non-Latching] | 178 Ω |
| Working axis [The default connector key is aligned to slow axis.] | Both axis working. |
| Handling power | 500 mW |
| Operating temperature | 0~70 ℃ |
| Storage temperature | -40~85 ℃ |
| Fiber type | PM Panda Fiber |
| Dimensions | 27(L) x 12(W) x 8.2(H) |
Datasheet
Supplier Information
Related Products
-
Optical Path Protection Board (OSS Dual Channel)
Fiber Optic Switches
Visint
Wavelength Range: 1310±50nm and 1550±50nm Monitored Optical Power Range: +25dBm~-50dBm Insertion Loss-OSS Path Protection: ≤ 1.5dB
The OSS optical protection card was developed by Huixinte Communications to secure communications on important fiber routes and equipment. At the transmitting end, an optical channel selector routes the outgoing signal through 1 of 2 channels: the working or standby channel. Real-time monitoring of primary and backup fibers, with simultaneous optical power-meter monitoring, helps prevent both fiber routes from being interrupted at once.
-
CRDS Series Products-High-Performance Laser Switch
Fiber Optic Switches
Dospectrum
Operating wavelength: Selectable within 1000nm~1700nm Bandwidth: ≥10GHz Switch-State Transition Time: <1ns
-
1X2 Optical Switch
Fiber Optic Switches
Lightcomm
Wavelength range: 1260~1610 nm Switch type: Latching or Non-Latching Insertion loss [each connector added: IL +0.3dB (1310~1550nm)]: ≤0.80 dB
-
1x2 Optical Switch OOS-1-2-X-X-X-X
Fiber Optic Switches
O-send
Operating Wavelength: 1260~1620 for SM, 850~1300 for MM Insertion Loss [typical：0.5]: ≤0.7 dB Wavelength Dependent Loss: ≤0.25 dB
The mechanical optical switch uses a free-space design with fast switching, low insertion loss and high reliability. Widely used in OADM, OXC and system monitoring, its compact size facilitates high-density integration in fiber-optic communication systems.
Related Articles
As a core precision optical component for wavelength screening, frequency locking and spectral demodulation, optical etalons are widely used in high-end scientific research and precision laser equipment.
As a vital emerging sector of modern three-dimensional spatial economy, the low-altitude economy has become a new global growth driver. It covers a wide range of commercial scenarios, including UAV navigation and obstacle avoidance, precise airspace management, aerial mapping, low-altitude logistics distribution, security monitoring and emergency disaster rescue. Nevertheless, frequent extreme weather, complex terrain obstacles and increasingly dense low-altitude flight activities pose severe challenges to the safety and stability of low-altitude aircraft operations.
Laser pump sources are the core energy input component of solid-state lasers and laser amplifiers, and their performance directly determines the output power, beam quality and service life of the entire laser system. In scenarios such as industrial processing, scientific research experiments and high-end equipment, improper pump source selection will not only result in substandard system performance, but also bring a series of problems such as rapid device degradation and high operation and maintenance costs. This article sorts out the core selection logic and key pitfalls of pump source procurement, and provides selection references based on mature, mass-produced high-reliability products to help purchasers efficiently screen suitable products.
Shandong Haucore Optoelectronics Co., Ltd. introduces the HGLD‑792‑COS‑D‑10WB semiconductor laser within its COS series. Delivering an output power of 10 W at a central wavelength of 792 nm, this device adopts gold‑tin bonding COS packaging. Featuring high reliability and long service life, it serves as a preferred pump source for solid‑state lasers and is widely deployed in industrial processing, laser display, medical & aesthetic treatment, scientific research and other fields.
Loading...
Name
Phone
Organization
Use Case
Database Platform