UV Masks, Ultraviolet Masks
Lanpulike's UV mask has an integrated clip-fit design and skin-friendly surface. Lightweight and stylish, it is comfortable without sagging or pressure and leaves vision unobstructed. Read the manual before use to avoid improper-operation damage; damage from failure to follow instructions is excluded from warranty service. Contact the hotline for questions, comments and feedback. Your recognition and evaluation encourage us. Thank you. 2. A four-layer composite filter uses a grade-13 HEPA system for rapid, efficient removal of fine harmful particles. 3. Food-grade liquid-silicone facepiece and strap are safer, environmentally friendly and comfortable against skin. 4. A soft-pack explosion-proof lithium battery uses sealed packaging, with no leaks/heavy metals, high energy density and greater safety than traditional lithium batteries; one charge lasts 4-6 hours. 5. A one-way valve and aerodynamic channels rapidly expel CO2 and other exhaled gases to avoid rebreathing. 6. A protective design at the nose bridge reduces injury from contact with the unit during falls.
Save to Favorites
Overview
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
1075nm Single-Mode Pump Source MCSPL-1075-400-N-H1-1-FA-T1
Lamps
Mchlight
Center wavelength [Operating wavelength 1075nm]: 1075 nm Spectral width: ≤2 nm Output Power [Output Power Means the Maximum Output Power without Isolation or Protection Components]: 400/500 or other
Mchlight produces 1075nm high-stability single-mode pump sources using professional circuit design (ACC and APC) and a high-precision temperature control system (ATC), ensuring high-precision, highly stable laser operation; a large color LCD, a clear display of current and power, stable continuous output with adjustable power, communication interfaces and host software can be provided to customer requirements, a fiber isolator can be built in, available in modular form, for easy customer integration .
-
1080nm Single-Mode Pump Source MCSPL-1080-400-N-H1-1-FA-T1
Lamps
Mchlight
Center wavelength [Operating wavelength 1080nm]: 1080 nm Spectral width: ≤2 nm Output Power [Output Power Means the Maximum Output Power without Isolation or Protection Components]: 400/500 or other
Mchlight produces 1080nm high-stability single-mode pump sources using professional circuit design (ACC and APC) and a high-precision temperature control system (ATC), ensuring high-precision, highly stable laser operation; a large color LCD, a clear display of current and power, stable continuous output with adjustable power, communication interfaces and host software can be provided to customer requirements, a fiber isolator can be built in, available in modular form, for easy customer integration .
-
Light Guide Plate Laser Solutions
Lamps
Delphilaser
Working area [Customizable]: 1950mm×1500mm(customizable) Processing speed: 4000mm/s Dot Width: Can Reach 60um
This equipment uses a CO2 laser to produce dot patterns on PMMA and MS materials. An optimized optical design enables volume production on the new MS material and processing of material as thin as 2mm, with high yield and quick process changeover.
-
Collimator OC-XX-XX-XX
Lamps
O-send
Passband Central Wavelength: 1550 nm Polarization-dependent loss (PDL): ≤0.1 dB ReturnLos: ≥60 dB
A collimator converts diverging light, radiation or particle beams into parallel beams. Its main role is to constrain direction and range, reduce scattering interference and concentrate the signal.
-
Collimating Lens
Lamps
Sunday-optics
Enclosure material: Aluminum or Copper Optical element: Aspheric lenses, two-element lenses, three-element lenses (glass), single rubber rings, and two-piece rubber rings Dimensions: M6X0.5、M7X0.5、M9X0.5、M8X0.5、M12.7X0.5
A collimating lens converts light from each point in an aperture column into a parallel, collimated beam. Lens selection depends on aberration requirements. Simple plano-convex or biconvex lenses with larger relative apertures suit low demands; achromats with smaller relative apertures suit higher demands. Collimators are a key Sunday product, available as standard or custom designs. Sandi Optoelectronics offers single aspheres, doublets and triplets.
Related Articles
Electro-optic deflectors (EODs) are optical devices used to steer or deflect light beams by applying an electric field to a specialized optical crystal. Unlike mechanical beam steering systems that rely on moving mirrors, electro-optic deflectors enable high-speed, non-mechanical beam control with exceptional precision and responsiveness. They are widely used in laser scanning, optical communications, microscopy, laser printing, spectroscopy, and scientific research, where rapid and accurate laser beam positioning is essential.
The 850 nm and 940 nm infrared narrow‑bandpass filters launched by Innovation Photoelectric are core optical components specially designed for day‑and‑night security cameras. They effectively eliminate image interference during visible‑light and infrared‑illumination switching, delivering stable round‑the‑clock monitoring performance.
Within cutting‑edge ultrafast photonics research, asynchronous optical sampling (ASOPS) and synchronous sampling serve as fundamental technologies for terahertz excitation detection, coherent Raman imaging and other time‑resolved spectroscopy experiments.
Shanghai Connet Laser Technology Co., Ltd. focuses on technological innovation, delivering cutting-edge photonic products & solutions for industrial lasers, LiDAR, fiber optic sensing, coherent telecom, cold atom physics and precision spectroscopy research & mass manufacturing.
Loading...
Name
Phone
Organization
Use Case
Database Platform