100mW-200W Naturally Cooled Laser Power Meter Sensor Dospectrum DP-40mm-100W-C
Save to Favorites
Specifications
| Parameter | Value |
|---|---|
| Spectral range | 0.19-25 μm |
| Power range | 100mw-100W(200W) |
| Intermittent Measurement Power [Cont.] | 100W(Cont.) |
| Intermittent Measurement Power [3min] | 150W (3min) |
| Intermittent Measurement Power [2min] | 200w(2min) |
| Resolution | 5 mW |
| Measurement Uncertainty [±] | <1 % |
| Nonlinearity [±] | <1 % |
| Accuracy [±] | <3 % |
| Response time | <2 s |
| Absorber Type | CB |
| Detection Aperture | 40 mm |
| Max Average Power Density [10W; CW] | 20kW/cm²,10W,CW |
| Max Energy Density [1064nm; 1ns] | 0.3J/cm²,1064nm,1ns |
| Specifications | 100 mm × 100 mm × 80 mm |
| Cooling method | Natural cooling |
| Interface Type | DB-9M |
| Cable Length | 1.5 m |
Datasheet
Supplier Information
Related Products
-
LYNK-A Analog-Interface Laser Power Meter Lynk-A-1W
Laser Power Meters
Shafan-oe
Spectral range: 0.19~11 um Input aperture: 18mm Power Measurement Range: 1mW - 1.5W
The Lynk-A-series interface laser power meter uses an analog interface and comes in 1W (1V/W) and 10W (0.1V/W) versions. A single 5-24V supply makes it easy to integrate into lasers and other equipment.
-
LYNK-A Analog-Interface Laser Power Meter Lynk-A-10W
Laser Power Meters
Shafan-oe
Spectral range: 0.19~11 um Input aperture: 18mm Power Measurement Range: 1mW - 15W
The Lynk-A-series interface laser power meter uses an analog interface and comes in 1W (1V/W) and 10W (0.1V/W) versions. A single 5-24V supply makes it easy to integrate into lasers and other equipment.
-
Lynk-1000W25-M1-T Laser Power Meter
Laser Power Meters
Shafan-oe
Spectral range: 0.19~11 um Input aperture: 25mm Power Measurement Range: 1W-1000W
1000W water-cooled inline laser power meter with high stability. Full-band operation, easy to use, stable readings and convenient calibration; a high-quality alternative to imported power meters.
-
Lynk-100C25-M1-T Laser Power Meter
Laser Power Meters
Shafan-oe
Spectral range: 0.19~11 um Input aperture: 25mm Power Measurement Range: 20mW-125W
100W Inline Laser Power Meter , Ultrathin Sensor ; Full Spectral Range , Easy Operation , Stable Readings , Easy Calibration ; High Quality , Replacement for Imported Power Meters
-
Lynk-100F19-M1-T Laser Power Meter
Laser Power Meters
Shafan-oe
Spectral range: 0.19~11 um Input aperture: 19mm Power Measurement Range: 20mW - 100W
100W Range Laser Power Meter , For Use with Equipment , For Inline Use ; Full Spectral Range , Easy Operation , Stable Readings , Easy Calibration ; High Quality , Replacement for Imported Power Meters
Related Articles
As a core precision optical component for wavelength screening, frequency locking and spectral demodulation, optical etalons are widely used in high-end scientific research and precision laser equipment.
As a vital emerging sector of modern three-dimensional spatial economy, the low-altitude economy has become a new global growth driver. It covers a wide range of commercial scenarios, including UAV navigation and obstacle avoidance, precise airspace management, aerial mapping, low-altitude logistics distribution, security monitoring and emergency disaster rescue. Nevertheless, frequent extreme weather, complex terrain obstacles and increasingly dense low-altitude flight activities pose severe challenges to the safety and stability of low-altitude aircraft operations.
Laser pump sources are the core energy input component of solid-state lasers and laser amplifiers, and their performance directly determines the output power, beam quality and service life of the entire laser system. In scenarios such as industrial processing, scientific research experiments and high-end equipment, improper pump source selection will not only result in substandard system performance, but also bring a series of problems such as rapid device degradation and high operation and maintenance costs. This article sorts out the core selection logic and key pitfalls of pump source procurement, and provides selection references based on mature, mass-produced high-reliability products to help purchasers efficiently screen suitable products.
Shandong Haucore Optoelectronics Co., Ltd. introduces the HGLD‑792‑COS‑D‑10WB semiconductor laser within its COS series. Delivering an output power of 10 W at a central wavelength of 792 nm, this device adopts gold‑tin bonding COS packaging. Featuring high reliability and long service life, it serves as a preferred pump source for solid‑state lasers and is widely deployed in industrial processing, laser display, medical & aesthetic treatment, scientific research and other fields.
Loading...
Name
Phone
Organization
Use Case
Database Platform