Variable-Gain High-Speed Current Amplifier DHPCA-100(DP)
Save to Favorites
Specifications
| Parameter | Value |
|---|---|
| Gain-Transimpedance [With 50Ω Load] | 1×10²~1×10⁸V/A (50Ω load) |
| Gain accuracy | ±1 % |
| Lower Cutoff Frequency | DC/100 Hz, Switchable |
| Upper Cutoff Frequency [Depends on Gain Setting; See Table below; Maximum] | Up to 200MHz depending on gain settings, as shown in the table below; switchable to 10MHz or 1Mhz. |
| Noise voltage [Typical] | Typical 2.8 nV/√Hz |
| Bias current [Typical] | Typical 20 pA |
| Enclosure - Weight | 320g (0.74 Pounds) |
| Material | AIMg4.5Mn Aluminum Alloy, Nickel-Plated |
| Storage temperature | -40℃~+100℃ |
| Operating temperature | 0℃~+60℃ |
| Signal input Voltage [Absolute Maximum Ratings ; Max] | ±5V |
| Transient Input Voltage [Absolute maximum ratings; with 1 nF source capacitance; maximum] | ±1.5 kV (with 1 nF Source Capacitance) |
| Control Input Voltage [Absolute Maximum Ratings ; Max] | -5V/+16V |
| Supply voltage [Absolute Maximum Ratings ; Max] | ±20V |
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
TO46 155M-10G PIN-TIA APT155M-3.3V-T046-BL-5PIN-Vapd
Transimpedance Amplifiers
Belyphotonics
Operating Wavelength λ [Tc=25℃]: min:1100 nm；max:1620 nm Supply Current ICC [Tc=25℃]: min:14 mA；typical:18 mA；max:22 mA Breakdown Voltage Vbr [Tc=25℃; Id= 10uA]: min:40 V；max:52 V
Coaxial PD Photodiode Devices
-
AMP102(DP) Transimpedance Amplifier, DC-100KHZ Bandwidth
Transimpedance Amplifiers
Dospectrum
Bandwidth Range: DC~100Khz GAIN: 1KV/A-10KV/A-100KV/A Signal amplitude [Hi-Z Load]: 0~10V
-
Variable-Gain Low-Noise Current Amplifier DLPCA-200(DP) DHPCA-200(DP)
Transimpedance Amplifiers
Dospectrum
Gain-Transimpedance: 1x10^3~1x10^9V/A Gain accuracy: ±1 % Lower Cutoff Frequency: DC (DC)/1 Hz
-
InGaAs PIN-TIA PD Module OPT-1-X-X-X-XX-X
Transimpedance Amplifiers
O-send
Absolute Maximum Ratings - Storage Temperature: -40°C~+100°C Absolute Maximum Ratings - Operating temperature: -40°C~+85°C Absolute Maximum Ratings - Reverse Voltage [CW]: 30V
The InGaAs PIN-TIA PD module is mainly used for FTTH SDH SONET applications, with a 75um photosensitive area and PIN-TIA design.
Related Articles
For pulsed laser and full-spectrum optical testing, photodiodes and thermopiles have inherent drawbacks. Photodiodes show weak response in infrared band, while thermopiles feature slow response and cannot capture nanosecond narrow pulses.
Driven by the rapid upgrading of intelligent vehicles, optoelectronic sensing technologies represented by laser sensing and infrared thermal imaging have become core pillars for high-level autonomous driving and smart cockpit iteration. Leveraging automotive-grade optoelectronic R&D advantages, Pilot Technology Group launches the VITAL intelligent vehicle solution. By integrating high-power VCSEL laser chips and vehicle infrared night-vision thermal imagers, the system comprehensively enhances vehicle environmental perception and realizes safer, smarter and more comfortable driving experiences.
As premium broadband light sources situated between traditional LEDs and laser diodes, MicroLight superluminescent‑diode (SLD) products combine broad spectral bandwidth, sufficient optical output power and low‑coherence performance.
Driven by worldwide energy‑structure transformation, the lithium‑ion battery industry is expanding rapidly as green, high‑efficiency energy‑storage devices gain surging global market demand. With years‑long dedication to intelligent manufacturing, Han’s Laser Lithium‑battery Intelligent Equipment has accumulated solid R&D strength and rich practical experience. By integrating multiple cutting‑edge technologies, the company delivers high‑efficiency, eco‑friendly and sustainable lithium‑ion battery production lines, bringing revolutionary upgrades to the new‑energy battery sector.
Loading...
Name
Phone
Organization
Use Case
Database Platform