Fiber-Input Balanced Photodetector 320-1000nm Silicon Amplified Type with Fixed Gain PDB440A(DP) PDB415A(DP)
Save to Favorites
Specifications
| Parameter | Value |
|---|---|
| Photosensitive Range | 320nm~1000nm |
| Photosensitive Area Dimensions | Φ0.8mm |
| Responsivity | 0.53A/W |
| Common-Mode Rejection Ratio | >25dB |
| Transimpedance Gain | 50×10^3V/A |
| Conversion Gain | 26.5×10^3V/W |
| Continuous Saturation Power [@820nm] | 135uW@820nm |
| NEP | 12.03pW/√HZ |
| Detector Net Weight | 0.35kg |
| Operating temperature | 0~40℃ |
| Storage temperature | -40~70℃ |
| Overall dimensions | 99mmX88mmX48.5mm |
| Power input interface | LUMBERG RSMV3 FEMALE |
| Power supply | LDS12B(DP)±12VDC Regulated Linear Power Supply 6W,220VAC |
| Gain adjustment | Rotary step adjustment |
| Signal interface | SMA Female connector |
Datasheet
Supplier Information
Related Products
-
PD-500B
Optical Detectors
Inxuntech
Center wavelength: 800~1700nm Bandwidth （3dB）: 500MHz Common-Mode Rejection Ratio: >25dB
Yingxun Xinguang's balanced photodetection module combines precision symmetrical optics, matched high-frequency InGaAs photodiodes and an ultra-low-noise transimpedance amplifier (TIA). This high-performance module provides high bandwidth and excellent common-mode noise rejection.
-
Whisper Silicon Solid-State Detector Module
Optical Detectors
Pavilionintegration
Input Supplier Voltage: +/-5V Photoelectric Sensitivity [Typical]: 6.0x107 V/W（Typical） Effective Sensing Srea: Ф1/Ф3mm
As the semiconductor industry advances, solid-state detectors (SSDs), including silicon photomultipliers (SiPMs) and other semiconductor photodetectors, are developing rapidly. Heat-dissipation modules, PCBs, special optics and other functional modules can be added to their configuration for fluorescence detection in life-science instruments, providing excellent performance and reliability. Used together with PIC's innovative, compact, low-noise diode lasers, SiPM detectors support clinical, diagnostic and research applications in moving toward smaller, highly integrated and highly reliable systems.
-
Whisper Silicon Solid-State Detector Module
Optical Detectors
Pavilionintegration
Input Supplier Voltage: +/-5V Photoelectric Sensitivity [Typical]: 6.0x107 V/W（Typical） Effective Sensing Srea: Ф1/Ф3mm
As the semiconductor industry advances, solid-state detectors (SSDs), including silicon photomultipliers (SiPMs) and other semiconductor photodetectors, are developing rapidly. Heat-dissipation modules, PCBs, special optics and other functional modules can be added to their configuration for fluorescence detection in life-science instruments, providing excellent performance and reliability. Used together with PIC's innovative, compact, low-noise diode lasers, SiPM detectors support clinical, diagnostic and research applications in moving toward smaller, highly integrated and highly reliable systems.
-
1000um Indium Gallium Arsenide Detector OPD-1-X-X-X-XX-X
Optical Detectors
O-send
Absolute Maximum Ratings - Storage Temperature: -40°C~+100°C Absolute Maximum Ratings - Operating temperature: -40°C~+85°C Absolute Maximum Ratings - Reverse Voltage [CW]: 30V
The 1000um InGaAs detector is mainly used to manufacture power meters. Its detection wavelength ranges from 800nm to 1700nm, and its photosensitive area is 1000um.
-
2000um Indium Gallium Arsenide Detector Die OTC-PD-2000-TOXX-XX
Optical Detectors
O-send
Responsivity [Vr=-5V]: min:0.70；typical:0.85 Dark current: max:0.7 mA Photosensitive Area Diameter: 2000um
2000μm InGaAs PIN detectors in TO-CAN packages are widely used in the manufacture of optical communication, test and measurement equipment.
Related Articles
Medical disposable‑device manufacturers have long demanded high‑performance interconnect accessories for single‑use equipment. The newly‑launched REDEL‑P disposable‑connector family addresses this requirement and delivers premium‑grade electrical connections for varied one‑time‑use medical instruments.
A microlens array (MLA) is a high-precision optical component composed of hundreds or thousands of tiny, uniformly arranged micro lenses on a single flat substrate. Unlike traditional single lenses that focus one light beam, a microlens array can split, homogenize, and reshape light on a micro scale. It is widely paired with VCSELs, lasers, and image sensors, becoming a core part of modern miniature optical systems.
BEIJING JIEPU TREND supplies YAG+Er:YAG+YAG bonded composite slab laser crystals for high‑power solid‑state laser systems. The monolithic slab consists of two undoped YAG end‑cap layers and a central Er‑doped YAG gain segment. The overall dimension is 9 mm×9 mm×9 mm.
Driven by the rapid upgrading of industrial automation, high-precision displacement sensing technology has become a core foundation of intelligent manufacturing.
Loading...
Name
Phone
Organization
Use Case
Database Platform