TMUX400G Board
The TMUX400G card provides 400G service access over fiber links, converting up to 4*QSFP28 100G to CFP2 400G. The CFP2 coherent optical module has a tunable wavelength and works with DWDM multiplexers/demultiplexers for wavelength-division multiplexed transmission. It provides a high-quality solution for transmission links with limited fiber resources and high fiber-line loss.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Client-Side Interface -C1-C4 | QSFP package supporting SR4, CWDM4, CLR4, LR4 (dual rate) and ER4 modules; DR1, FR1 and LR1 are optional. |
| Client-Side Interface-Service Type | 100GE、100GE_RS_FEC、100GE FlexE、OTU4 |
| Client-Side Interface -LLDP | Supported |
| Client-Side Interface - Ethernet | Ethernet RMON monitoring, including transmitted/received packets and bytes, port utilization, CRC and erroneous packets. |
| Client-Side Interface -Telemetry | Supports Ethernet performance, optical-module transmit/receive power, bias current, etc. |
| Client-Side Interface-Delay Measurement | Supported |
| Client-Side Interface-Automatic Laser Shutdown (ALS) | Supported |
| Client-Side Interface-Loopback | Supported |
| Client-Side Interface -Local Fault | l Inserts Local Fault downstream on the client side when Ethernet input is lost or a fault occurs on the wavelength-division side. l Transparently transports Local Fault and Remote Fault. l Supports delayed Local Fault insertion and configurable delay. |
| Client-Side Interface-Ethernet Client-Layer Alarms | l Ethernet physical port loss-of-signal alarm (ETH-LOS). l Ethernet synchronization loss. l Excess erroneous-packet alarm. |
| Line-Side Interface -L1 | CFP2-DCO Module |
| Line-Side Interface-Wavelength (Frequency) Range | DWDM：1529.16nm-1567.14nm（191.3THz-196.05THz） |
| Line-Side Interface - Wavelength Adjustable Function | Supports 75/100G Spacing Adjustable |
| Line-Side Interface-Modulation Method [@100G / @200G / @300G / @400G；@100G；DP-16QAM@200G；DP-8QAM@200G； DP-QPSK@200G；DP-8QAM@300G；DP-16QAM@400G] | DP-QPSK@100G；DP-16QAM@200G；DP-8QAM@200G； DP-QPSK@200G；DP-8QAM@300G；DP-16QAM@400G |
| Line-Side Interface-Line-Side Protocol | OpenROADM/OpenZR+/SCFEC |
| Line-Side Interface - Dispersion Tolerance [@100G] | ±40000ps/nm@100G |
| Line-Side Interface-OSNR Tolerance [@100G DP-QPSK / @200G DP-8QAM / @200G DP-16QAM / @200G DP-QPSK；@100G DP-QPSK；<18.5dB@200G DP-8QAM； <21.5dB@200G DP-16QAM；<14dB@200G DP-QPSK；] | <11.5dB@100G DP-QPSK；<18.5dB@200G DP-8QAM； <21.5dB@200G DP-16QAM；<14dB@200G DP-QPSK； |
| Line-Side Interface -OTN Function | l Provides OTUC4 and OTUC2 interfaces, optionally supporting OTU4. l Uses the ITU-T G709 frame format and overhead processing. l ODUk (k=flex,4,C2) layer supports PM and TCM. l OTUk (k=C2,C4) layer supports SM. |
| Line-Side Interface -ESC | optional |
| Line-Side Interface-OTN Alarms | ODUk PM alarm indication, locked defect, open connection indication, trail mismatch, signal degradation, backward defect indication and service-signal failure. OTUCn loss of frame, loss of multiframe, alarm indication, trail mismatch, signal degradation, backward defect indication and signal failure. FEC excessive bit-error alarms before and after correction. |
| Line-Side Interface -Telemetry | Transmit/receive power, pre-forward-error-correction bit error rate (Pre-FEC), laser bias current and laser operating temperature. |
| Line-Side Interface-Loopback | Supported |
| Line-Side Interface-Delay Measurement | Supported |
| Line-Side Interface - Protection Function | Switching Completed within 50ms |
| Board Dimensions | 100（W）×40（H）×266（D）（mm） |
| Environmental Requirements - Operating temperature | -5℃ ~ 45℃ |
| Environmental Requirements - Storage Temperature | -40℃ ~ 80℃ |
| Environmental Requirements - Relative Humidity | 5% ~ 95% Non-condensing |
| Safety and EMC | Complies with FCC, UL, CE, TUV, CSA standards |
| Power consumption [Including Optical Transceiver Module] | ＜80W(Including Optical Transceiver Module) |
| Weight [Including Optical Transceiver Module] | ＜1.5KG(Including Optical Transceiver Module) |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
100G OEO
Optical Transport Equipment
Visint
Maximum Line-Card Capacity: 2*100G Bidirectional Transmission 4*100G Unidirectional Transmission Wavelength Range: CWDM：1271~1611nm、 Multimode ：850nm、1310nm DWDM：C-Band（100GHZ or 50GHZ） Service Access Type: SDH、SAN、SONET、ETHERNET、OTN
The 100G OEO amplifier card from Huixinte Communications regenerates 100G optical signals through optical-electrical-optical conversion, providing reamplification, reshaping and retiming. It converts to standard DWDM wavelengths and works with DWDM multiplexers/demultiplexers. Applications include SDH, SAN, SONET, ETHERNET, OTN and data-center interconnects, addressing limited fiber resources and high transmission loss.
-
100G OTU
Optical Transport Equipment
Visint
Maximum Line-Card Capacity: 1*100G Bidirectional Transmission 1*100G Unidirectional Transmission Wavelength Range: DWDM：C-Band（100GHZ or 50GHZ） Service Access Type: 100GE、OTU4
The 100G OTU card is a 100G fiber-link service access module developed by Huixinte Communications. It provides 3R regeneration (reamplification, reshaping and retiming) at any protocol rate from 103.125Gbit/s~111.81Gbit/s and converts signals to standard DWDM wavelengths. With DWDM multiplexers/demultiplexers, it enables WDM transmission for links with limited fibers and high loss.
-
10*10G + 100G 200G TMUX Board
Optical Transport Equipment
Visint
Maximum Line-Card Capacity: a)10*10G Bidirectional Transmission +1*100G Bidirectional Transmission b)2*100G Bidirectional Transmission Wavelength （ Frequency ） Range: DWDM：1529.16nm-1567.14nm（191.3THz-196.05THz） Modulation Method [@100G / @200G；@100G；DP-16QAM@200G；DP-8QAM@200G；DP-QPSK@200G]: DP-QPSK@100G；DP-16QAM@200G；DP-8QAM@200G；DP-QPSK@200G
The 200G TMUX card converts either 10*10G SFP+ + 1*100G QSFP28 or 2*100G QSFP28 to 200G CFP2 DCO. The wavelength-tunable CFP2 DCO coherent module works with DWDM multiplexers/demultiplexers for wavelength-division multiplexed transmission, providing a high-quality solution for links with limited fiber resources and high fiber-line loss.
-
1U Integrated Transmission Platform Vispace 1000-1U
Optical Transport Equipment
Visint
Mechanical Parameters-Overall Dimensions: Width * Height * Depth =440*42*285mm Mechanical Parameters-Fully Configured Weight: ≤10KG Operating environment - Operating temperature: -10℃– 60℃
The Vispace 1000-1U integrated transmission platform is independently developed and manufactured to meet diverse market needs, greater integration and unified network management. Its standard 19-inch, 1U chassis fits most racks. Four slots accommodate 3 service boards and 1 network-element manager, normally in slot 4; that slot also accepts a service board when management is unnecessary. Mixed boards include OTU wavelength conversion, OEO regeneration, ETU optical/electrical conversion, OLP line protection, OBP bypass protection, OSS optical switching, ODM multiplexing/demultiplexing, OADM add/drop, EDFA amplification and DCM dispersion compensation. 2 rear power slots and all boards support hot swapping. Dual power slots support AC/DC, configured to customer needs.
-
2.5G OEO
Optical Transport Equipment
Visint
Maximum Line-Card Capacity: 4*2.488G bidirectional or 8*2.488G unidirectional transmission Wavelength Range: CWDM：1271~1611nm、 Multimode ：850nm、1310nm DWDM：C-Band（100GHZ or 50GHZ） Service Access Type: PDH、SDH：STM-1/STM-4/STM-16 SONET:OC-3/OC-12/OC-48、FE、GE、1G、2G、CPRI 1~3、POS、FICON、ESCON
The 2.5G OEO amplifier board developed by Huixinte Communications amplifies and reshapes signals during optical transmission. It saves fiber resources and networking costs, addresses excessive transmission distance and is widely used for long-distance transmission on trunk networks.
Related Articles
Electro-optic deflectors (EODs) are optical devices used to steer or deflect light beams by applying an electric field to a specialized optical crystal. Unlike mechanical beam steering systems that rely on moving mirrors, electro-optic deflectors enable high-speed, non-mechanical beam control with exceptional precision and responsiveness. They are widely used in laser scanning, optical communications, microscopy, laser printing, spectroscopy, and scientific research, where rapid and accurate laser beam positioning is essential.
The 850 nm and 940 nm infrared narrow‑bandpass filters launched by Innovation Photoelectric are core optical components specially designed for day‑and‑night security cameras. They effectively eliminate image interference during visible‑light and infrared‑illumination switching, delivering stable round‑the‑clock monitoring performance.
Within cutting‑edge ultrafast photonics research, asynchronous optical sampling (ASOPS) and synchronous sampling serve as fundamental technologies for terahertz excitation detection, coherent Raman imaging and other time‑resolved spectroscopy experiments.
Shanghai Connet Laser Technology Co., Ltd. focuses on technological innovation, delivering cutting-edge photonic products & solutions for industrial lasers, LiDAR, fiber optic sensing, coherent telecom, cold atom physics and precision spectroscopy research & mass manufacturing.
Loading...
Name
Phone
Organization
Use Case
Database Platform