OPZA25 Large Vertical Translation Stage OSMC-1U
High-load lift stage with submicrometer increments, requiring O’motion control.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Drive Voltage | DC 12V-24V |
| Drive Current [Max] | 2A Max |
| Drive Type | 16 bit PWM Control |
| Control Algorithm | PID |
| High-Resolution Stepping [For a Motor with 1.8° Step Angle] | 51200 microsteps per revolution, corresponding to a 1.8° step-angle motor |
| Microstep Subdivision Factor [Software Adjustment] | 16X-256X(Software Adjustment) |
| Encoder Feedback Bandwidth | 500 Hz |
| Position Counter | 32 bit |
| Operation Mode | Position, Speed, Motion Cycle |
| Acceleration/Deceleration Curve | S-Shaped |
| External trigger Control | Frequency Identification (PWM Signal) |
| Communication Interface | USB Serial port |
| Communication Protocol | Open ASCII Commands |
| Supports System | Windows / Linux / MacOS / Android |
| Motor Connector [Open-Loop Control Is MDR20 Type] | D-sub 26（ Open-Loop Control Is MDR20 Type ） |
| Limit-Switch Input | Positive Limit, 0-Position Limit |
| Encoder Power Supply | DC 5V Output |
| Panel Controls [Chinese Menu] | Hall-Effect Stepless-Speed Joystick, 1.54-Inch OLED (Chinese Menu) |
| Power-Off Memory | Yes, holds position |
| Enclosure dimensions | 76.0 mm × 74.2 mm × 47.0 mm |
| Weight | 183.5g |
Key Features
Datasheet
Supplier Information
Related Products
-
AS11075-XY Motorized XY Scanning Stage
Motorized Stages
Oeabt
Specifications: 281.0 mm × 252.8 mm × 32.3 mm Total travel: 110mm(X axis)*75mm(Y axis) Max Load: 1kg
The automated, high-precision four-inch two-axis stage provides a large 110*75mm XY travel range for microscopy, industrial inspection and precision processing.
-
AS11075-XY Motorized XY Scanning Stage OM-4X
Motorized Stages
Oeabt
Specifications: Four-Axis Motion Controller/Driver
The automated, high-precision four-inch two-axis stage provides a large 110*75mm XY travel range for microscopy, industrial inspection and precision processing.
-
AS11075-XY Motorized XY Scanning Stage OM-4CP
Motorized Stages
Oeabt
Specifications: Four-Axis Motion-System Hand Controller
The automated, high-precision four-inch two-axis stage provides a large 110*75mm XY travel range for microscopy, industrial inspection and precision processing.
-
AS11075-XY Motorized XY Scanning Stage OSMC-1U
Motorized Stages
Oeabt
Specifications: 76.0 mm × 74.2 mm × 47.0 mm Weight: 183.5g
The automated, high-precision four-inch two-axis stage provides a large 110*75mm XY travel range for microscopy, industrial inspection and precision processing.
-
LMTS Series Stepper-Motor Translation Stage LMTS-D28
Motorized Stages
Oeabt
Specifications: 253.0 mm × 70.0 mm × 24.0 mm Travel: 28mm Actuator Type: 28BYG-B Motor with Shaft Outputs at Both Ends
LMTS-series motorized linear translation stages provide 28mm travel and are optimized for moderate loads and high-resolution measurement and inspection. Special microstepping design enables smaller, smoother low-speed movements with less vibration noise than DC servomotors.
Related Articles
In photonics and laser technology, devices that manipulate optical signals via the electro-optic effect form the backbone of precision optical systems. Electro-optic phase modulators and electro-optic deflectors are two prominent examples of this device category. As a critical hardware solution for high-speed, high-accuracy laser beam direction control, electro-optic deflectors are widely deployed across industrial and research settings. Below is a detailed overview of their core structure, key performance drivers, and primary use cases.
As a top‑tier supplier of tunable laser chips, Shandong Zhongxin Optoelectronics Technology Company has newly launched the world’s first budget‑friendly fiber‑Bragg‑grating (FBG) demodulator and scanning module.
A laser bar is an array semiconductor laser chip integrated with dozens of emitters, which realizes hundred-watt quasi-continuous output on a single chip. With regular emitter arrangement and controllable fill factor, integrated thermal design and superior wall-plug efficiency compared to single chips, it acts as the core light source for high-power pumping, medical lasers and precision processing.
BEIJING JIEPU TREND supplies YAG+Er:YAG+YAG bonded composite slab laser crystals for high‑power solid‑state laser systems. The monolithic slab consists of two undoped YAG end‑cap layers and a central Er‑doped YAG gain segment. The overall dimension is 9 mm×9 mm×9 mm.
Loading...
Name
Phone
Organization
Use Case
Database Platform