OPZA25 Large Vertical Translation Stage
High-load lift stage with submicrometer increments, requiring O’motion control.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Specifications | 286.0 mm × 181.5 mm × 72.3 mm |
| Vertical Travel | 25mm |
| Platform Height | Minimum Platform Height: 72.3mm; Maximum Platform Height: 99mm |
| Tabletop dimensions | 178 mm × 160 mm |
| Lead screw Type | Ø12mm Precision Ball Screw, Lead 2mm |
| Guide-Rail Type | Dual Linear Guide Rails |
| Load Capacity [Recommended value] | Recommended Value ≤65 Pounds (30kg) |
| Weight | 5.65kg |
| Bidirectional Positioning Repeatability | 5μm |
| Backlash | 5μm |
| Flatness | ≥0.02mm |
| High/Low-Speed Setting Speed and Jog Distance [O’motion Four-Axis Motion Control System] | Depends on Host-Controller Pulses |
| Motor Type | 42BYG Two-Phase Stepper Motor |
| Step angle | 1.8° |
| Microstep Count | 51200 |
| Operating voltage | DC 12 V |
| Operating current | 2A |
| Sensor Type | Slot-type photoelectric sensor (NPN normally open, active high) |
| Recommended Driver / Controller | OSMC-1U Single-Axis Stepper Controller, O’motion Four-Axis Motion Control System |
| Platform Height-Minimum Platform Height | 72.3mm |
| Platform Height-Maximum Platform Height | 99mm |
| Lead screw Type - Lead | 2mm |
Key Features
Datasheet
Supplier Information
Related Products
-
AS11075-XY Motorized XY Scanning Stage
Motorized Stages
Oeabt
Specifications: 281.0 mm × 252.8 mm × 32.3 mm Total travel: 110mm(X axis)*75mm(Y axis) Max Load: 1kg
The automated, high-precision four-inch two-axis stage provides a large 110*75mm XY travel range for microscopy, industrial inspection and precision processing.
-
AS11075-XY Motorized XY Scanning Stage OM-4X
Motorized Stages
Oeabt
Specifications: Four-Axis Motion Controller/Driver
The automated, high-precision four-inch two-axis stage provides a large 110*75mm XY travel range for microscopy, industrial inspection and precision processing.
-
AS11075-XY Motorized XY Scanning Stage OM-4CP
Motorized Stages
Oeabt
Specifications: Four-Axis Motion-System Hand Controller
The automated, high-precision four-inch two-axis stage provides a large 110*75mm XY travel range for microscopy, industrial inspection and precision processing.
-
AS11075-XY Motorized XY Scanning Stage OSMC-1U
Motorized Stages
Oeabt
Specifications: 76.0 mm × 74.2 mm × 47.0 mm Weight: 183.5g
The automated, high-precision four-inch two-axis stage provides a large 110*75mm XY travel range for microscopy, industrial inspection and precision processing.
-
LMTS Series Stepper-Motor Translation Stage LMTS-D28
Motorized Stages
Oeabt
Specifications: 253.0 mm × 70.0 mm × 24.0 mm Travel: 28mm Actuator Type: 28BYG-B Motor with Shaft Outputs at Both Ends
LMTS-series motorized linear translation stages provide 28mm travel and are optimized for moderate loads and high-resolution measurement and inspection. Special microstepping design enables smaller, smoother low-speed movements with less vibration noise than DC servomotors.
Related Articles
In photonics and laser technology, devices that manipulate optical signals via the electro-optic effect form the backbone of precision optical systems. Electro-optic phase modulators and electro-optic deflectors are two prominent examples of this device category. As a critical hardware solution for high-speed, high-accuracy laser beam direction control, electro-optic deflectors are widely deployed across industrial and research settings. Below is a detailed overview of their core structure, key performance drivers, and primary use cases.
As a top‑tier supplier of tunable laser chips, Shandong Zhongxin Optoelectronics Technology Company has newly launched the world’s first budget‑friendly fiber‑Bragg‑grating (FBG) demodulator and scanning module.
A laser bar is an array semiconductor laser chip integrated with dozens of emitters, which realizes hundred-watt quasi-continuous output on a single chip. With regular emitter arrangement and controllable fill factor, integrated thermal design and superior wall-plug efficiency compared to single chips, it acts as the core light source for high-power pumping, medical lasers and precision processing.
BEIJING JIEPU TREND supplies YAG+Er:YAG+YAG bonded composite slab laser crystals for high‑power solid‑state laser systems. The monolithic slab consists of two undoped YAG end‑cap layers and a central Er‑doped YAG gain segment. The overall dimension is 9 mm×9 mm×9 mm.
Loading...
Name
Phone
Organization
Use Case
Database Platform