LMTS Series Stepper-Motor Translation Stage LMTS-DRIVER
LMTS-series motorized linear translation stages provide 28mm travel and are optimized for moderate loads and high-resolution measurement and inspection. Special microstepping design enables smaller, smoother low-speed movements with less vibration noise than DC servomotors.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Motor Output - Drive Voltage | DC 12V |
| Motor Output - Drive Current [Max] | 1250mA（Max） |
| Motor Output - Drive Type | 12 bit PWM Control |
| Motor Output-Control Algorithm | Semiclosed-Loop Microstepping |
| Motor Output - High-Resolution Stepping [Stepper Motor with 1.8° Step Angle; LMTS-D] | LMTS-D: 6400 microsteps per turn with a 1.8° step-angle stepper motor |
| Motor Output - High-Resolution Stepping [Step angle 18°/1:45 geared stepper motor; LMTS-S] | LMTS-S: 28800 microsteps per revolution (18° step angle/1:45 geared stepper motor). |
| Motor Output-Position Feedback | Hall-Effect Encoder (Two-Phase) Input, 5V Differential |
| Motor Output-Encoder Feedback Bandwidth | 500 Hz |
| Motor Output-Position Counter | 32 bit |
| Motor Output - Operation Mode | Position, Speed, Motion Cycle |
| Motor Output-Acceleration/Deceleration Method | Trapezoidal Acceleration/Deceleration |
| Motor Connector （Dsub26 Type ） Open-Loop Control Is M8/8pin Type - Motor Drive Output | Two-Phase DC Type |
| Motor Connector (Dsub26 Type), Open-Loop Control Uses M8/8pin Type-Quadrature Encoder (QEP) Input [Open-Loop Control Is M8/8pin Type] | Differential |
| Motor Connector (Dsub26 Type), Open-Loop Control Uses M8/8pin Type-Limit-Switch Input [Open-Loop Control Is M8/8pin Type] | Positive Limit, 0-Position Limit |
| Motor Connector （Dsub26 Type ） Open-Loop Control Is M8/8pin Type - Encoder Power Supply | DC 5V |
| Front Panel Controls-Motion-Control Lever | Single-Pole Double-Throw, Self-Resetting |
| Input Power Supply Requirements - Voltage | Regulated DC 12V |
| Input Power Supply Requirements - Max Output Current | 1.5A（Max） |
| Housing Dimensions (Excluding Buttons) [Excluding Pushbutton] | 76.1 mm × 74.2 mm × 46.9 mm |
| Weight | 183.4g |
| Specifications | Stepper-Motor Actuator |
Key Features
Datasheet
Supplier Information
Related Products
-
AS11075-XY Motorized XY Scanning Stage
Motorized Stages
Oeabt
Specifications: 281.0 mm × 252.8 mm × 32.3 mm Total travel: 110mm(X axis)*75mm(Y axis) Max Load: 1kg
The automated, high-precision four-inch two-axis stage provides a large 110*75mm XY travel range for microscopy, industrial inspection and precision processing.
-
AS11075-XY Motorized XY Scanning Stage OM-4X
Motorized Stages
Oeabt
Specifications: Four-Axis Motion Controller/Driver
The automated, high-precision four-inch two-axis stage provides a large 110*75mm XY travel range for microscopy, industrial inspection and precision processing.
-
AS11075-XY Motorized XY Scanning Stage OM-4CP
Motorized Stages
Oeabt
Specifications: Four-Axis Motion-System Hand Controller
The automated, high-precision four-inch two-axis stage provides a large 110*75mm XY travel range for microscopy, industrial inspection and precision processing.
-
AS11075-XY Motorized XY Scanning Stage OSMC-1U
Motorized Stages
Oeabt
Specifications: 76.0 mm × 74.2 mm × 47.0 mm Weight: 183.5g
The automated, high-precision four-inch two-axis stage provides a large 110*75mm XY travel range for microscopy, industrial inspection and precision processing.
-
LMTS Series Stepper-Motor Translation Stage LMTS-D28
Motorized Stages
Oeabt
Specifications: 253.0 mm × 70.0 mm × 24.0 mm Travel: 28mm Actuator Type: 28BYG-B Motor with Shaft Outputs at Both Ends
LMTS-series motorized linear translation stages provide 28mm travel and are optimized for moderate loads and high-resolution measurement and inspection. Special microstepping design enables smaller, smoother low-speed movements with less vibration noise than DC servomotors.
Related Articles
In photonics and laser technology, devices that manipulate optical signals via the electro-optic effect form the backbone of precision optical systems. Electro-optic phase modulators and electro-optic deflectors are two prominent examples of this device category. As a critical hardware solution for high-speed, high-accuracy laser beam direction control, electro-optic deflectors are widely deployed across industrial and research settings. Below is a detailed overview of their core structure, key performance drivers, and primary use cases.
As a top‑tier supplier of tunable laser chips, Shandong Zhongxin Optoelectronics Technology Company has newly launched the world’s first budget‑friendly fiber‑Bragg‑grating (FBG) demodulator and scanning module.
A laser bar is an array semiconductor laser chip integrated with dozens of emitters, which realizes hundred-watt quasi-continuous output on a single chip. With regular emitter arrangement and controllable fill factor, integrated thermal design and superior wall-plug efficiency compared to single chips, it acts as the core light source for high-power pumping, medical lasers and precision processing.
BEIJING JIEPU TREND supplies YAG+Er:YAG+YAG bonded composite slab laser crystals for high‑power solid‑state laser systems. The monolithic slab consists of two undoped YAG end‑cap layers and a central Er‑doped YAG gain segment. The overall dimension is 9 mm×9 mm×9 mm.
Loading...
Name
Phone
Organization
Use Case
Database Platform