OTD-S Series Vibration-Isolation Breadboard OTD-S3030
The vibration-isolation table uses a three-layer honeycomb sandwich structure. The 6mm top skin is made from 430 high-permeability nickel-alloy stainless steel and machined on a large surface grinder, with flatness of 0.11000mm. Optical tables are widely used in optics, electronics, precision machinery, aerospace, fine chemicals, nondestructive testing and biochemical research. Their dynamic mechanics affect experimental accuracy and reliability. Elastic supports reduce ground-borne vibration for stable operation.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Specifications | 300 mm × 300 mm × 51.5 mm |
| Weight | 10.5kg |
| Tabletop Material-Top Panel | 6.0mm-thick 430 magnetic nickel-alloy series steel plate, sandblasted surface |
| Tabletop Material-Bottom Panel | 6.0mm-thick 430 magnetic nickel-alloy series steel plate, sandblasted surface |
| Tabletop Material-Surrounding Sidewall | 2.0mm-thick carbon steel, covered with polyethylene synthetic leather |
| Damping Method | Restrictor Orifice |
| Platform Top Surface | 25*25mm threaded-hole matrix across the surface, 37.5mm from the table edge |
| Surface Flatness [Measured Value within Any 600*600mm Area] | +0.1mm, measured within any 600*600mm area |
| Panel Tapped Holes | Metric M6， Threaded hole Depth 15mm |
| Natural frequency | ＜2.5Hz |
| Flatness | Less than 0.05mm/m2 |
| Load | 100kg/m² |
| Surface Roughness | Less than 0.8um |
| Positioning Repeatability | Less than 0.05mm |
| Surface Roughness | Less than 4um |
| Material | Nickel-Alloy Stainless Steel |
| Hole spacing | 25 mm × 25 mm |
Key Features
Datasheet
Supplier Information
Related Products
-
MCB1 Microscope Top Breadboard MCB2
Optical Tables and Breadboards
Oeabt
Specifications: 364.7 mm × 100.0 mm × 15.9 mm Port Type: 【 Female Connector 】Ø53.2mm,,α=60° Clear aperture: Ø38.1mm
MCB-series breadboards support custom widefield observation and epi-illumination paths above Oeabt microscopy systems. The breadboard has a Ø51mm male dovetail with a central Ø38.1mm through-hole for the imaging-system optical axis.
-
MPBX Microscope Port Breadboard
Optical Tables and Breadboards
Oeabt
Specifications: 472.4 mm × 114.2 mm × 111.2 mm Slider Base [Thickness ≥4mm]: 45° Mounting of Ø2-Inch Optical Components with Thickness ≥4mm Slider Base: SM2 (2.035”-40) internal thread
The MPBX breadboard supports custom widefield observation setups and epi-illumination paths on top of Oeabt microscopic imaging systems and includes a dual-position slider mount.
-
OHD-6C Series Small Breadboard OHD-6C15
Optical Tables and Breadboards
Oeabt
Specifications: 150 mm × 125 mm × 6 mm Thread type: M4、M6 Threaded hole ，Ø4.2 Countersunk hole Spacing: Hole spacing 12.5mm or 25.0mm, edge spacing 12.5mm
OHD-6C-series breadboards are designed for space-limited setups. Constructed from 6mm-thick solid black-anodized aluminum, they greatly reduce surface reflections. Their small dimensions and thin profile suit confined areas or extensions to an optical assembly's work surface.
-
Optical Table Module
Optical Tables and Breadboards
Huayazhuhai
Flatness after vacuum holding a silicon wafer: ≤5um; heating time from 20℃ to 55℃: ≤30s; cooling time from 55℃ to 20℃: ≤55s; digital pressure reading during heating/cooling with a chip held: <-85Kpa; reading without a chip held: >-10Kpa.
-
Complete Optical Table
Optical Tables and Breadboards
Pavilionintegration
Wavelength: 405nm~800nm, 2 to 3 optional lasers Power: 20 ~ 50mW RMS Noise (20Hz - 20MHz): < 0.1%
The BASOE optical engine incorporates 405nm/488nm/532nm/638nm lasers, or optional alternative wavelength bands, and an integrated beam-shaping module to deliver a focused beam meeting customer requirements to the flow cell. The integrated optical laser module uses built-in driver circuitry and patented technology to provide high stability, low coherence and low speckle, ensuring outstanding laser performance over time and temperature changes. Combined with an integrated SiPM detector signal-receiving module, it ensures batch consistency, greatly shortens instrument development cycles and accelerates customers' time to market.
Related Articles
Electro-optic deflectors (EODs) are optical devices used to steer or deflect light beams by applying an electric field to a specialized optical crystal. Unlike mechanical beam steering systems that rely on moving mirrors, electro-optic deflectors enable high-speed, non-mechanical beam control with exceptional precision and responsiveness. They are widely used in laser scanning, optical communications, microscopy, laser printing, spectroscopy, and scientific research, where rapid and accurate laser beam positioning is essential.
The 850 nm and 940 nm infrared narrow‑bandpass filters launched by Innovation Photoelectric are core optical components specially designed for day‑and‑night security cameras. They effectively eliminate image interference during visible‑light and infrared‑illumination switching, delivering stable round‑the‑clock monitoring performance.
Within cutting‑edge ultrafast photonics research, asynchronous optical sampling (ASOPS) and synchronous sampling serve as fundamental technologies for terahertz excitation detection, coherent Raman imaging and other time‑resolved spectroscopy experiments.
Shanghai Connet Laser Technology Co., Ltd. focuses on technological innovation, delivering cutting-edge photonic products & solutions for industrial lasers, LiDAR, fiber optic sensing, coherent telecom, cold atom physics and precision spectroscopy research & mass manufacturing.
Loading...
Name
Phone
Organization
Use Case
Database Platform