2.5G 2mW Bi-Dicomponent with Isolator BLBD-PSA-D3320A-55B-2GR
Save to Favorites
Specifications
| Parameter | Value |
|---|---|
| Reverse Voltage(LD) Vr(LD) [Absolute Maximum Ratings; Tc=25℃] | max:2 V |
| Forward Current(LD) If(LD) [Absolute Maximum Ratings; Tc=25℃] | max:120 mA |
| Reverse Voltage(MPD) Vr(PD) [Absolute Maximum Ratings; Tc=25℃] | max:15 V |
| Forward Current(MPD) If(PD) [Absolute Maximum Ratings; Tc=25℃] | max:2 mA |
| Storage Temperature Tstg [Absolute Maximum Ratings; Tc=25℃] | min:-40 ℃；max:+85 ℃ |
| Operating Temperature Topr [Absolute Maximum Ratings; Tc=25℃] | min:-20 ℃；max:70 ℃ |
| Lead Soldering Temperature/Time Ts [Absolute Maximum Ratings; Tc=25℃] | typical:260/10 or 360/5 |
| Fiber Bend Radius R [Absolute Maximum Ratings; Tc=25℃] | min:30 mm |
| Threshold Current Ith [Transmitter Optical and Electrical Characteristics; Tc=25℃; CW, T=25℃] | min:3 mA；max:15 mA |
| Threshold Current Ith [Transmitter Optical and Electrical Characteristics; Tc=25℃; CW, T=85℃] | max:50 mA |
| Forward Voltage Vop [Transmitter Optical and Electrical Characteristics; Tc=25℃] | typical:1.2 V；max:1.5 V |
| Optical Output Power Po [Transmitter Optical and Electrical Characteristics; Tc=25℃; If=23~27mA] | typical:2 mW |
| Center Wavelength λc [Transmitter Optical and Electrical Characteristics; Tc=25℃; CW, Po= Pf] | min:1327 nm；typical:1330 nm；max:1333 nm |
| Rise time/Fall time (20-80%) Tr/Tf [Transmitter Optical and Electrical Characteristics; Tc=25℃; If=Ith,Po=Pf, 50 Ohm] | max:120 pS |
| Monitor Current Im [Transmitter Optical and Electrical Characteristics; Tc=25℃; CW, If=Ith+20mA] | min:100 uA；max:1000 uA |
| Capacitance CPD [Transmitter Optical and Electrical Characteristics; Tc=25℃; VRD=5V,F=1MHz] | typical:10 PF；max:15 PF |
| Dark Current Id [Transmitter Optical and Electrical Characteristics; Tc=25℃; VRD=5V] | max:100 |
| Spectral Width(RMS-20dB) △λ [Transmitter Optical and Electrical Characteristics; Tc=25℃; CW, If=Ith+20mA] | typical:0.5 nm；max:1 nm |
| Bandwidth BW [Transmitter Optical and Electrical Characteristics; Tc=25℃] | typical:2.5 GHz |
| Slope Efficiency SE [Transmitter Optical and Electrical Characteristics; Tc=25℃; CW, If=Ith+20mA] | min:0.09 W/A |
| Tracking Error TE [Transmitter Optical and Electrical Characteristics; Tc=25℃; CW, Im=Constant & If=Ith+20mA] | min:-1.5 dB；max:1.5 dB |
| Isolation ISO [Transmitter Optical and Electrical Characteristics; Tc=25℃] | min:30 dB |
| Side Mode Suppression Ration SMSR [Transmitter Optical and Electrical Characteristics; Tc=25℃; CW, If=Ith+20mA] | min:30 dB |
| Composite second-order beat CSO [Transmitter Optical and Electrical Characteristics; Tc=25℃; 2 tone test, f1=2200MHz, f2=2202.5MHz, OMI=20%/tone,] | max:-50 dBc |
| Ccomposite triple beat distortion CTB [Transmitter Optical and Electrical Characteristics; Tc=25℃; 2 tone test, f1=2200MHz, f2=2202.5MHz, OMI=20%/tone,] | max:-60 dBc |
| Relative Intensity Noise RIN [Transmitter Optical and Electrical Characteristics; Tc=25℃] | max:-134 dB/Hz |
| Detection range Iso(1510>20dB) λ [Receiver Optical and Electrical Characteristics; Tc=25℃] | min:1540 nm；typical:1550 nm；max:1650 nm |
| Responsivity Res [Receiver Optical and Electrical Characteristics; Tc=25℃; VR=5V,λ=1550nm] | min:0.85 A/W |
| Dark current Id [Receiver Optical and Electrical Characteristics; Tc=25℃; VR=5V] | max:1.0 |
| Bandwidth(-3dB) BW [Receiver Optical and Electrical Characteristics; Tc=25℃] | typical:2.5 GHz |
| Saturation power P [Receiver Optical and Electrical Characteristics; Tc=25℃] | min:3 dBm |
| Capacitance C [Receiver Optical and Electrical Characteristics; Tc=25℃; VR=5V] | typical:0.6 pF；max:1.0 pF |
| IMD2 [Receiver Optical and Electrical Characteristics; Tc=25℃; λ=1550 nm, (1*)] | typical:-70 dBc |
| IMD3 [Receiver Optical and Electrical Characteristics; Tc=25℃; λ=1550nm, (1*)] | typical:-80 dBc |
| Return Loss RL [Receiver Optical and Electrical Characteristics; Tc=25℃; λ=1550nm] | min:40 dB |
| Reverse Voltage V_R [Receiver Optical and Electrical Characteristics; Tc=25℃] | max:30 V |
| Return Loss RL [Receiver Optical and Electrical Characteristics; Tc=25℃; λ=1550nm] | min:40 dB |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Fiber-Optic Transceiver LF-121S-25KM
Transmitters and Receivers
Lifo-fj
Fiber interface: SC Single-Mode Dual-Fiber Fiber wavelength: 1310nm Optical fiber Rate: 100M
-
Fiber-Optic Transceiver LF-211S-20KM A
Transmitters and Receivers
Lifo-fj
Fiber interface: SC Single-Mode Single-Fiber Fiber wavelength [Transmit]: 1310nm Fiber wavelength [Reception]: 1550nm
-
1.25G~10G 1550nm Coaxial Laser Assembly OLD-5-X-X-X-X-X-X-XX-X-X-XX
Transmitters and Receivers
O-send
Absolute Maximum Ratings - Storage Temperature: -40~+85°C Absolute Maximum Ratings - Operating temperature: -20°C~+70°C Absolute Maximum Ratings -LD Forward Current: 120mA
For test/measurement and OTDR;1550nm with built-in monitor PD.
-
1000BASE SFP SR(850nm 550M) OSFP-108505
Transmitters and Receivers
O-send
Emission wavelength: 850nm Specification: 550m
This enhanced SFP transceiver includes DDM and meets Ethernet requirements for 1.25Gbps communications. Alarms/warnings follow SFF-8472 MSA version 10.4 through I2C. It supports 1.25G at 850nm over up to 550m of multimode fiber. Subwatt consumption and excellent EMI enable dense ports. RoHS compliance and industry safety design/testing include Class I laser conformity with US FDA/CDRH and IEC-60825. The SFP SR connects to a standard 20-contact SFP connector for hot swapping, allowing maintenance/configuration without host power removal. Transmit/receive DATA interfaces are internally AC-coupled. LV-TTL transmitter-disable input and LOS output are provided. A pull-ring latch enables easy release and meets SFP MSA. A +3.3V supply supports case temperatures 0°C to +70°C commercial or -40°C to +85°C industrial. A metal housing shields EMI.
-
1000Base SFP BIDI Module(1310nm/1550nm 20Km) OSFP-1131520
Transmitters and Receivers
O-send
Emission wavelength: 1310nm/1550nm Specification: 20KM
This enhanced small-form-factor pluggable (SFP) fiber transceiver includes digital diagnostic monitoring (DDM). It complies with Ethernet standards and is ideal for 1.25Gbps data communications. DDM alarms and warnings are integrated through an I2C serial interface under the SFF-8472 multisource agreement (MSA), version 10.4. The transceiver supports 155Mbps to 1.25Gbps and provides a solution for 1310nm transmission over up to 20 kilometers of single-mode fiber. Subwatt consumption and excellent EMI performance support high port density. It is RoHS compliant and designed and tested to industry safety standards, and is a Class I laser product under US FDA/CDRH and international IEC-60825 standards. The SFP LR connects to a standard 20-contact SFP connector for hot swapping, allowing configuration changes or maintenance by replacing the transceiver without switching off the host. Transmitter and receiver DATA interfaces are internally AC-coupled. An LV-TTL transmitter-disable input and loss-of-signal (LOS) output are provided. A bail latch permits easy module removal and complies with the SFP MSA. A single +3.3V supply powers operation at case temperatures of 0°C to +70°C commercially or -40°C to +85°C industrially. The metal case protects against electromagnetic interference.
Related Articles
In photonics and laser technology, devices that manipulate optical signals via the electro-optic effect form the backbone of precision optical systems. Electro-optic phase modulators and electro-optic deflectors are two prominent examples of this device category. As a critical hardware solution for high-speed, high-accuracy laser beam direction control, electro-optic deflectors are widely deployed across industrial and research settings. Below is a detailed overview of their core structure, key performance drivers, and primary use cases.
As a top‑tier supplier of tunable laser chips, Shandong Zhongxin Optoelectronics Technology Company has newly launched the world’s first budget‑friendly fiber‑Bragg‑grating (FBG) demodulator and scanning module.
A laser bar is an array semiconductor laser chip integrated with dozens of emitters, which realizes hundred-watt quasi-continuous output on a single chip. With regular emitter arrangement and controllable fill factor, integrated thermal design and superior wall-plug efficiency compared to single chips, it acts as the core light source for high-power pumping, medical lasers and precision processing.
BEIJING JIEPU TREND supplies YAG+Er:YAG+YAG bonded composite slab laser crystals for high‑power solid‑state laser systems. The monolithic slab consists of two undoped YAG end‑cap layers and a central Er‑doped YAG gain segment. The overall dimension is 9 mm×9 mm×9 mm.
Loading...
Name
Phone
Organization
Use Case
Database Platform