Standard Fiber Patch Cord
These passive optical components provide detachable optical-path connections. A cable with connector plugs at both ends is called a patch cord; a cable with a plug at one end is called a pigtail. Single-core and dual-core (figure-8) structures are available. Length, connector plugs, material and cable diameter can be customized. ① Convenient operation and stable optical performance. ② Bend-insensitive design combining a graded-index core with a trench structure to control propagation modes within the core under the most challenging bending conditions. ③ Reduced optical-signal leakage to ensure stable network transmission. ④ Customizable length, connector plugs, material, cable diameter and color.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Diameter | 0.9、2.0、3.0 |
| Insertion loss [SM; Connector FC、SC、LC; End Face PC] | ≤0.30dB |
| Return loss [SM; Connector FC、SC、LC; End Face PC] | ≥45dB |
| Insertion loss [SM; Connector FC、SC、LC; End Face UPC] | ≤0.30dB |
| Return loss [SM; Connector FC、SC、LC; End Face UPC] | ≥50dB |
| Insertion loss [SM; Connector FC、SC、LC; End Face APC] | ≤0.30dB |
| Return loss [SM; Connector FC、SC、LC; End Face APC] | ≥60dB |
| Insertion loss [SM; Connector ST; End Face PC] | ≤0.30dB |
| Return loss [SM; Connector ST; End Face PC] | ≥45dB |
| Insertion loss [SM; Connector ST; End Face UPC] | ≤0.30dB |
| Return loss [SM; Connector ST; End Face UPC] | ≥50dB |
| Insertion loss [MM; Connector FC、SC、ST、LC; End Face PC] | ≤0.30dB |
| Repeatability | ≤0.20dB |
| Connector Tensile Resistance | ≥50N |
| End-Face Geometry - Radius of Curvature [Ferrule Outer Diameter φ1.25mm; PC,UPC Type] | 7～25 mm |
| End-Face Geometry - Radius of Curvature [Ferrule Outer Diameter φ1.25mm; APC Type] | 5～12 mm |
| End-Face Geometry - Radius of Curvature [Ferrule Outer Diameter φ2.5mm; PC,UPC Type] | 10～25 mm |
| End-Face Geometry - Radius of Curvature [Ferrule Outer Diameter φ2.5mm; APC Type] | 5～15 mm |
| End-Face Geometry-Apex Offset [Ferrule Outer diameter φ1.25mm/φ2.5mm] | ≤50 μm |
| End-Face Geometry-Fiber Recession/Protrusion [Ferrule Outer diameter φ1.25mm] | -100～+100 nm |
| End-Face Geometry-Fiber Recession/Protrusion [Ferrule Outer diameter φ2.5mm] | -100～+50 nm |
| End-Face Geometry -APC Angle [Ferrule Outer Diameter φ1.25mm/φ2.5mm; APC Type] | 8±0.2 ° |
| Operating temperature | -40～+80°C |
Applications
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
JX-130 Ribbon Fiber Aligner
Optical Fibers
Jxcmc
Applicable Optical fiber: 12-Core Ribbon Fiber Fiber diameter: 125μm Core-Alignment Loss [Single Fiber]: Single-Fiber Loss No Greater Than 0.3dB
-
JX-150 Single-Fiber V-Groove Aligner
Optical Fibers
Jxcmc
Applicable Optical fiber: Single-core Single-mode 、 Multimode Silica fiber Fiber diameter: 125μm Core-Alignment Loss [Single Fiber; Same Single-Mode Fiber]: Single-fiber loss no greater than 0.5dB (same single-mode fiber)
-
JX-160A Single-Fiber Aligner
Optical Fibers
Jxcmc
Applicable Optical fiber: Single-core Optical fiber Fiber diameter: 125μm Core-Alignment Loss: ≤0.05dB
-
JX-160A(400μm) Fiber Aligner
Optical Fibers
Jxcmc
-
JX-160A(530μm) Fiber Aligner
Optical Fibers
Jxcmc
Related Articles
As a core precision optical component for wavelength screening, frequency locking and spectral demodulation, optical etalons are widely used in high-end scientific research and precision laser equipment.
As a vital emerging sector of modern three-dimensional spatial economy, the low-altitude economy has become a new global growth driver. It covers a wide range of commercial scenarios, including UAV navigation and obstacle avoidance, precise airspace management, aerial mapping, low-altitude logistics distribution, security monitoring and emergency disaster rescue. Nevertheless, frequent extreme weather, complex terrain obstacles and increasingly dense low-altitude flight activities pose severe challenges to the safety and stability of low-altitude aircraft operations.
Laser pump sources are the core energy input component of solid-state lasers and laser amplifiers, and their performance directly determines the output power, beam quality and service life of the entire laser system. In scenarios such as industrial processing, scientific research experiments and high-end equipment, improper pump source selection will not only result in substandard system performance, but also bring a series of problems such as rapid device degradation and high operation and maintenance costs. This article sorts out the core selection logic and key pitfalls of pump source procurement, and provides selection references based on mature, mass-produced high-reliability products to help purchasers efficiently screen suitable products.
Shandong Haucore Optoelectronics Co., Ltd. introduces the HGLD‑792‑COS‑D‑10WB semiconductor laser within its COS series. Delivering an output power of 10 W at a central wavelength of 792 nm, this device adopts gold‑tin bonding COS packaging. Featuring high reliability and long service life, it serves as a preferred pump source for solid‑state lasers and is widely deployed in industrial processing, laser display, medical & aesthetic treatment, scientific research and other fields.
Loading...
Name
Phone
Organization
Use Case
Database Platform