Low-Frequency Electromagnetic Shaker （ Without Computer ） XB-OTS-RT40-450
Low-frequency electromagnetic vibration tables are widely used in defense, aviation communications, telecommunications, electronics, automotive and household-appliance industries. They detect early failures, simulate operating conditions and test structural strength, with broad applicability and reliable, effective testing.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 5-500 Hz |
| Operating Tabletop dimensions [W.D.H] | 450 mm × 450 mm × 32 mm |
| Overall Dimensions [W.D.H] | 450 mm × 450 mm × 450 mm |
| Maximum Acceleration | 15 g |
| Displacement Amplitude [Manual adjustment] | 0-5（ Manual adjustment ） |
| Max Load | 40 kg |
| Vibration Axes | Vertical |
| Vibration Waveform | Sine wave |
| Vibration Excitation Method | Electromagnetic Excitation |
| Cooling and Heat-Dissipation System | Forced-air cooling |
| Temperature Requirements | 0-40 °C |
| Humidity Requirements [Non-condensing] | 0-90， Non-condensing |
| Power Supply Requirements [Single-phase] | Single-phase AC 220V/50Hz±10% |
| Power | 1.5 KVA |
| Work surface Material | Aluminum alloy |
| Table Body Vibration Isolator | Standard configuration |
| Tabletop Screw Dimensions [Standard ； Customizable] | M8(customizable) |
| Number of Tabletop Screws [Customizable] | 8 Items （ Customizable ） |
| Table weight | 60 kg |
| Vibration Controller | 32-bit floating-point DSP processor, 24-bit A/D conversion resolution |
| Operating Method | Touchscreen + computer control |
| Control ring | Open-Loop Control |
| Frequency-Sweep Method | Linear, Logarithmic |
| Channel Parameters | Automatic range setting, preset sensor sensitivity and coupling mode (DC) |
| Sensor | Piezoelectric Accelerometer |
| Signal-to-noise ratio | >100dB |
| Monitor | 7-inch industrial touchscreen or 19-inch capacitive touchscreen computer |
| Operating System Requirements | WIN10 |
| Communication Method [Supports Secondary Development] | Modbus(Supports Secondary Development) |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Constant-Temperature Water Bath Test Equipment
Other Measurement Instruments
Huayazhuhai
Voltage: 220V10A Gas pressure: 0.4~0.7MP Industrial computer: IPC+WIN10
For smartwatches, the equipment scans a QR code to identify each watch and connects by Bluetooth to transfer test data. One tray holds 16 products for simultaneous constant-temperature testing at 37 degrees +0.1 degree. A precision controller heats the water to simulate human body temperature. Fully immersed watches read 60 sets of temperature data according to thresholds. Data is transferred by phone Bluetooth, uploaded to Mes and compared with actual temperature. Calibration and testing are provided.
-
Smart-Wristband MMI Automated Test Equipment
Other Measurement Instruments
Huayazhuhai
LCD Color: Screen Dead Pixels, Bright Pixels, Dead Lines, Stripes, Stains, Dark Clumps, Light Transmission, Light Leakage and Shavings Charging Current Test: Current Acquisition, Threshold 270MA~330MA Motor Testing [±10HZ]: Amplitude 200HZ±10HZ
Designed specifically for smart wristbands, this equipment tests Bluetooth connectivity and communication, photography and QR-code scanning with information upload, LCD operation, brightness, current, motor operation, A+G and NFC.
-
Hermeticity Test Equipment
Other Measurement Instruments
Huayazhuhai
Differential Pressure-Resolution: 0.1Pa Differential Pressure-Display Range [(Guaranteed Accuracy Range ±1000Pa)]: ±999.9pa (accuracy guaranteed over ±1000Pa) Differential Pressure-Accuracy [±2.5%; but 2Pa below 50Pa]: ±2.5%3fdg:1Pa; 2Pa below 50Pa
This independently developed compact benchtop airtightness tester has been adopted through cooperation with multiple customers, receiving favorable feedback and repeat purchases. Its simplified construction and high test accuracy meet high-throughput production requirements.
-
Network Cable Tracer
Other Measurement Instruments
Lifo-fj
Power Supply: DC 9V Battery Electricity consumption: 15mA Signal Transmission Format: Multitone Audio Pulses
-
Whisper Excitation Module-Whisper Plus Series
Other Measurement Instruments
Pavilionintegration
Wavelength: 375 nm - 1064 nm Power: Up to 250mW RMS Noise (20Hz - 20MHz): < 0.1%
PIC's Whisper Plus series upgrades Whisper with diode-based CW solid-state technology, ultralow noise, better efficiency than DPSS/gas lasers and high cost effectiveness. Proprietary WhisperIT® eliminates mode hopping and minimizes optical noise. The range includes Whisper Plus, WMN Plus and WCP Plus. Internal beam shaping provides focused spots matched to flow cytometry. Improved optical power, stability and beam quality make it ideal for flow applications. Compact size simplifies installation, integration into existing instruments and one-step replacement/maintenance. Very long life and low consumption provide a highly reliable, economical flow-application solution.
Related Articles
As a core precision optical component for wavelength screening, frequency locking and spectral demodulation, optical etalons are widely used in high-end scientific research and precision laser equipment.
As a vital emerging sector of modern three-dimensional spatial economy, the low-altitude economy has become a new global growth driver. It covers a wide range of commercial scenarios, including UAV navigation and obstacle avoidance, precise airspace management, aerial mapping, low-altitude logistics distribution, security monitoring and emergency disaster rescue. Nevertheless, frequent extreme weather, complex terrain obstacles and increasingly dense low-altitude flight activities pose severe challenges to the safety and stability of low-altitude aircraft operations.
Laser pump sources are the core energy input component of solid-state lasers and laser amplifiers, and their performance directly determines the output power, beam quality and service life of the entire laser system. In scenarios such as industrial processing, scientific research experiments and high-end equipment, improper pump source selection will not only result in substandard system performance, but also bring a series of problems such as rapid device degradation and high operation and maintenance costs. This article sorts out the core selection logic and key pitfalls of pump source procurement, and provides selection references based on mature, mass-produced high-reliability products to help purchasers efficiently screen suitable products.
Shandong Haucore Optoelectronics Co., Ltd. introduces the HGLD‑792‑COS‑D‑10WB semiconductor laser within its COS series. Delivering an output power of 10 W at a central wavelength of 792 nm, this device adopts gold‑tin bonding COS packaging. Featuring high reliability and long service life, it serves as a preferred pump source for solid‑state lasers and is widely deployed in industrial processing, laser display, medical & aesthetic treatment, scientific research and other fields.
Loading...
Name
Phone
Organization
Use Case
Database Platform