EPS Motor Environmental Operation Life Test Bench (YTH-080)
Save to Favorites
Specifications
| Parameter | Value |
|---|---|
| Inner Chamber Dimensions | 40 cm × 50 cm × 40 cm |
| Outer box dimensions | 60 cm × 172 cm × 120 cm |
| Temperature Range [Other temperatures can be customized] | -70℃、-60℃、-40℃、-20℃、0℃～150℃ |
| Humidity Range [Low humidity 10%RH～98%RH or 5%RH～98%RH customizable] | 20%RH～98%RH |
| Temperature and Humidity Fluctuation - Temperature Fluctuation | ±0.3℃ |
| Temperature and Humidity Fluctuation - Humidity Fluctuation | ±0.5%RH |
| Temperature and Humidity Uniformity - Temperature Uniformity [No load, 30min after stabilization] | ±2℃ |
| Temperature and Humidity Uniformity - Humidity Uniformity [No load, 30min after stabilization] | ±3%RH |
| Resolution Accuracy - Temperature | 0.01℃ |
| Resolution Accuracy - Humidity | 0.1%RH |
| Temperature Rise/Fall Time - Heating Rate | Average 3℃/min |
| Temperature Rise/Fall Time - Cooling Rate | Average 1℃/min |
| Outer Chamber Material | Cold-rolled steel plate + baked paint |
| Inner Chamber Material | SUS#304 Stainless Steel Plate |
| Insulation Material | PU |
| Circulation System | Centrifugal fan air circulation system |
| Heating System | SUS# stainless steel high-speed heater |
| Humidification System | Electric Heating Steam Humidification |
| Dehumidification System | ADP Critical Dew Point Cooling/Dehumidification Method |
| Refrigeration System | Compressor + Finned Evaporator + Air-Cooled (Water-Cooled) Condenser |
| Control System | Touch LCD Display + SSR + PID |
| Protection Devices | Overheat Protection Circuit Breaker, Humidification System Overheat Protection, Compressor Overload Protection, Control System Overload Protection, Overload Indicator Light, Phase Sequence Protection, Water Shortage Protection, High/Low Pressure Protection, Over-Temperature Protection, Water Supply Delay Protection, Fan Overcurrent Protection |
| Power - Single-phase AC voltage (1Ψ) | 220V |
| Power - Three-phase AC voltage (3Ψ) | 380V |
| Power - Frequency | 60/50Hz |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
EPS Motor Environmental Operation Life Test Bench (YTH-150)
Other
Yuanyao-tech
Inner Chamber Dimensions: 50 cm × 60 cm × 50 cm Outer box dimensions: 70 cm × 174 cm × 130 cm Temperature Range [Other temperatures can be customized]: -70℃、-60℃、-40℃、-20℃、0℃～150℃
-
Clamp-on ultrasonic flowmeter
Other
Hikmicrotech
Measurement accuracy - transit-time method [1m/s~10m/s]: Class 0.5 Measurement accuracy - Doppler method [1m/s~10m/s; bubble and solid particle volume content 1~10%]: Level 2 Measurement technology: Transit-time/Doppler method working condition adaptive
-
Indoor leak detector
Other
Hikmicrotech
Frequency bandwidth: 150~7500Hz Signal-to-noise ratio: 60dB Sensitivity: -29dB， 70mV/g
AP21 is a water leak detector.
-
IRTH Series High-Temperature Thermometer
Other
Mirhz
The Maileke IRTH Series two-color infrared thermometers can be widely used in industrial high-temperature measurement scenarios such as alloy smelting, ceramic kilns, cement production, and glass furnaces, and can work normally under harsh working conditions such as water vapor, smoke, and partial obstruction.
Related Articles
As fundamental refractive optical components, plano‑convex spherical lenses consist of one convex spherical surface and one flat surface.
Wuhan Optical Valley Interlink Technology Co., Ltd. was founded in 2013 by a technical team from Huazhong University of Science and Technology.
FiDAR, the fiber‑optic radar vehicle positioning and tracking system developed by Jianhe Bafang, is a high‑sensitivity distributed fiber‑sensing solution designed for intelligent traffic road monitoring. It outputs real‑time spatial coordinates of every vehicle across the full road section around‑the‑clock, delivering a brand‑new sensing technology for vehicle‑road cooperation, smart highway construction and urban traffic management.
GYOPTICS 30 W collimated isolator is a highly‑reliable passive optical component optimized for 1064 nm high‑power laser systems. Characterized by low insertion loss and superior backward‑light suppression capability, it effectively blocks reflected light traveling back toward the laser resonator, eliminating back‑reflection‑induced instability and protecting fiber or solid‑state laser sources during long‑term operation.
Loading...
Name
Phone
Organization
Use Case
Database Platform