CTM01-EC CTM series communicator
Save to Favorites
Specifications
| Parameter | Value |
|---|---|
| Power indicator | PWR: green |
| Run indicator | RUN: green |
| Error indicator | ERR: red |
| Sensor communication indicator | Red light: RTU communication abnormal |
| D-BUS indicator | Green light: RTU communication normal; alternating red and green flashing: some slave RTU communication abnormal |
| Ethernet indicator | Green: network communication normal; On: Ethernet port has established a valid network connection; Flashing: Ethernet port is in network active state; Off: Ethernet port has not established a network connection or port abnormal / no RTU communication activity |
| Operating voltage | 10~30 V DC |
| Ethernet | 10/100Base-T(X) RJ45, automatic flow control, full/half duplex mode, MDI/MDI-X auto-sensing |
| Console | CLI command management port, uses 2.0 mm pitch 8-position terminal block, occupies positions 6-8 from the left |
| RS-485 | Supports 2 RS-485 serial ports, one of which is reserved, uses 2.0 mm pitch 10-position terminal block, serial ports occupy 4 positions |
| Firmware flashing | Software flashing port, uses 2.0 mm pitch 8-position terminal block, occupies positions 2-5 from the left |
| Power consumption at room temperature, no load | 0.7w (2.0 mm pitch 10-position terminal block, power occupies 2 positions) |
| Power consumption at room temperature, full load | 0.7w |
| Power consumption at high temperature, full load | 0.8w |
| Operating Temperature | -40 ℃~75 ℃ (no freezing) |
| Storage Temperature | -40 ℃~85 ℃ (no freezing) |
| Working Humidity | 5 %~95 % RH (no condensation) |
| Vibration Resistance | 10~55 Hz, Double Amplitude 1.5 mm, X/Y/Z directions each 2 hours |
| Shock resistance | 98 m/s², 11 ms, half-sine wave, 5 times each in X/Y/Z directions |
| IP Rating | IP40 |
| Installation Method | DIN rail mounting |
| Dimensions | 94.5 mm × 29.4 mm × 40.8 mm |
| Material | Plastic |
| Weight | Approx. 200 g |
Datasheet
Supplier Information
Related Products
-
ECG Impedance Testing
Automation and Control
Huayazhuhai
Voltage: 220V16A Gas pressure: 0.4~0.7Mpa Touchscreen: PLC
For electrical-product triboelectric voltage, surface resistance, volume resistance, grounding resistance, and system resistance.
-
Fully Automatic Pipette Tip Box Loader
Automation and Control
Huayazhuhai
Huaya's fully automatic boxed pipette-tip loading workstation independently loads 10 boxes per cycle with unattended automation. Pour bagged tips into the hopper and start with one touch; 10 boxes fill in 25 minutes, then the unit stops or alarms when complete. Its distinctive automation is industry-leading. Features: An intuitive touchscreen for one-touch operation. Startup self-testing and multiparameter infrared settings prevent missing tips. Built-in UV sterilizes tips along the track, and enclosed doors prevent environmental contamination. Antistatic design supports 24-hour operation without static-related shutdown. Durable construction suits any high-volume user. Tips enter holes individually; the source's final statement concerns irregular or defective tips affecting users' experiments.
-
Odd-Form Component Insertion Machine
Automation and Control
Huayazhuhai
Component Insertion Speed: 11250cph Positioning Repeatability [±0.01mm]: ±0.01mm Process Capability: ≥1.67
-
Upright Spray-Gun Plasma Controller APL-5001
Automation and Control
Huayazhuhai
Overall dimensions: L460*W160*H315mm Weight: 9.5kg Plasma Output Power: 200-650W
-
Automatic Battery-Cell Film-Wrapping Equipment
Automation and Control
Delphilaser
Equipment Dimensions: 600 mm × 1400 mm × 2000 mm Maximum Battery-Cell Dimensions [Customizable]: 300×120×120(customizable)
This automated equipment is designed for secondary high-temperature-film wrapping during battery-cell rework. It includes automatic film wrapping, a high-temperature-film pressure-holding system and an electrical-performance test system, providing fast processing and high yield.
Related Articles
Electro-optic deflectors (EODs) are optical devices used to steer or deflect light beams by applying an electric field to a specialized optical crystal. Unlike mechanical beam steering systems that rely on moving mirrors, electro-optic deflectors enable high-speed, non-mechanical beam control with exceptional precision and responsiveness. They are widely used in laser scanning, optical communications, microscopy, laser printing, spectroscopy, and scientific research, where rapid and accurate laser beam positioning is essential.
The 850 nm and 940 nm infrared narrow‑bandpass filters launched by Innovation Photoelectric are core optical components specially designed for day‑and‑night security cameras. They effectively eliminate image interference during visible‑light and infrared‑illumination switching, delivering stable round‑the‑clock monitoring performance.
Within cutting‑edge ultrafast photonics research, asynchronous optical sampling (ASOPS) and synchronous sampling serve as fundamental technologies for terahertz excitation detection, coherent Raman imaging and other time‑resolved spectroscopy experiments.
Shanghai Connet Laser Technology Co., Ltd. focuses on technological innovation, delivering cutting-edge photonic products & solutions for industrial lasers, LiDAR, fiber optic sensing, coherent telecom, cold atom physics and precision spectroscopy research & mass manufacturing.
Loading...
Name
Phone
Organization
Use Case
Database Platform