PC3-N PC3 White LED Digital Fiber Amplifier
Save to Favorites
Specifications
| Parameter | Value |
|---|---|
| Working Principle | Fiber Amplifier |
| Detection method | Through-beam/Diffuse Reflective |
| Housing Style | Slim Block |
| Light source | White LED |
| Indicator light | Running: green; Output: orange |
| Display | Threshold setting value: 4-digit green LED; Current acquired value: 4-digit red LED |
| Response Time | High-speed mode: 16 µs; Standard mode: 200 µs |
| Switching mode | Light.on (light-on operation) / Dark.on (dark-on operation) switchable |
| Output Mode | NPN Open Collector |
| Switching frequency | ≤5000 Hz |
| Operating voltage | 12~24 V DC ±10 % |
| Current Consumption | Standard mode: ≤36 mA; Energy-saving mode: ≤30 mA |
| Residual Voltage | <1.8 V |
| Load Current | ≤100 mA |
| Insulation Resistance | ≥20 MΩ/500 V DC |
| Dielectric withstand voltage | 1000 V AC, 50/60 Hz, 1 minute |
| Protection circuit | Reverse polarity protection/Surge protection |
| Delay Function | ON Delay/OFF Delay/One-shot Output/ON Delay+OFF Delay/ON Delay+One-shot Output (0.1~9999 ms) |
| Vibration Resistance | 10~55 Hz, Double Amplitude 1.5 mm, X/Y/Z directions each 2 hours |
| Operating Temperature | -25 ℃~55 ℃ (no freezing) |
| Storage Temperature | -30 ℃~70 ℃ (no freezing) |
| Working Humidity | 35 %~85 % RH (no condensation) |
| Storage humidity | 35 %~95 % RH (no condensation) |
| Ambient illuminance | Incandescent lamp ≤3000 Lux; sunlight ≤10000 Lux |
| IP Rating | IP50 |
| Connection Method | 2 m/4-core cable |
| Dimensions | 75.5 mm × 33.2 mm × 10.5 mm |
| Material | PC |
| Weight | Approx. 71 g |
| Accessories | Bracket |
Datasheet
Supplier Information
Related Products
-
UV Oven
Light-Emitting Diodes (LEDs)
Szlamplic
The Lanpulik UVLED oven/UV curing oven uses LED emission. Different power levels and wavelengths of 365nm, 385nm, 395nm and 405nm are available for curing various UV adhesives, inks, varnishes and paints.
-
Digital-Printing Ink LP358 UV LED DIGITAL INKS LED
Light-Emitting Diodes (LEDs)
Szlamplic
Fineness [GB/T13217.3-2008]: ≤0.5μm Viscosity [45℃, Rotational Viscometer]: 8-10mPa.s Inkjet Coding Speed [LED Curing at 385nm Wavelength]: 250m/min
Low odor, low migration and high adhesion. Product overview: This series contains modified epoxy resin, modified polyester resin, photoinitiators, reactive diluent, pigments, color powder and additives. Low viscosity and odor, rapid curing, good adhesion/flexibility, wear resistance and scratch resistance suit inkjet printing on PP, PE, PET and PVC films. It causes low skin irritation, produces no polluting emissions and has no migration after curing, meeting FDA 21 CFR 175.300 technical requirements. It is a new-generation environmentally friendly printing product.
-
Flexible-Printing Ink LF361 UV LED FLEXO INKS LED
Light-Emitting Diodes (LEDs)
Szlamplic
Fineness [GB/T13217.3-2008]: ≤5μm Viscosity [Rotational Viscometer]: 1000-2000mPa.s Curing speed [385nm]: 300-500mJ/cm2
LF361 UV LED FLEXO INKS. Low odor, low migration and high adhesion. Product overview: Modified epoxy resin, modified polyester resin, photoinitiators, reactive diluent, pigments, color powder and additives provide low odor, rapid curing, good adhesion, abrasion resistance and scratch resistance. Suitable substrates include PP, PE, PET, PVC, aluminized film, synthetic paper and other films. Low skin irritation, no polluting emissions and no migration after curing meet FDA 21 CFR 175.300 technical requirements, making this a new-generation environmentally friendly printing product. We worked with STARBUCKS. They tried flexographic inks from many well-known companies; only Lamplic's met their special requirements for low odor, low migration and high adhesion.
-
Mini LED Laser Repair Equipment
Light-Emitting Diodes (LEDs)
Delphilaser
This equipment repairs defective pixels in Mini LED products. Unavoidable die-bonding defects can cause dark spots, detached LEDs and nonuniform bright spots. Laser rework uses removal, cleaning, rebonding, soldering and inspection to repair specific defective positions.
-
Laser Hair Removal--Super LED Hair-Removal Module
Light-Emitting Diodes (LEDs)
Oephotonics
Power: 200-720 W Center wavelength: 808 nm Chip Quantity: 4-12 pcs
Super LED hair-removal module.
Related Articles
Medical disposable‑device manufacturers have long demanded high‑performance interconnect accessories for single‑use equipment. The newly‑launched REDEL‑P disposable‑connector family addresses this requirement and delivers premium‑grade electrical connections for varied one‑time‑use medical instruments.
A microlens array (MLA) is a high-precision optical component composed of hundreds or thousands of tiny, uniformly arranged micro lenses on a single flat substrate. Unlike traditional single lenses that focus one light beam, a microlens array can split, homogenize, and reshape light on a micro scale. It is widely paired with VCSELs, lasers, and image sensors, becoming a core part of modern miniature optical systems.
BEIJING JIEPU TREND supplies YAG+Er:YAG+YAG bonded composite slab laser crystals for high‑power solid‑state laser systems. The monolithic slab consists of two undoped YAG end‑cap layers and a central Er‑doped YAG gain segment. The overall dimension is 9 mm×9 mm×9 mm.
Driven by the rapid upgrading of industrial automation, high-precision displacement sensing technology has become a core foundation of intelligent manufacturing.
Loading...
Name
Phone
Organization
Use Case
Database Platform