Network Cable Tester LA-1015
It can connect to both ends of the core wires of a multi-core cable for testing. Its equipped remote toolkit makes it convenient for users to test wires on walls or block panels. The digital multimeter function can measure DC/AC voltage, current, resistance, continuity and diodes.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| MAX Input Voltage | DC |
| Diode Test | Maximum Test Current |
| Overload Protection | The screen displays when overloaded |
| Low battery indication | When the battery is low, the screen displays |
| AC Response | Normal Response |
| DC Voltage | Range 200 mV 2 V 20 V 200 V 600 V |
| AC Voltage | Range 2 V 20 V 200 V 600 V |
| DC Current | Range 200 uA 2000 uA 20 mA 200 mA |
| AC Current | Range 200 uA 2000 uA 20 mA 200 mA |
| Resistance | Range 200 Ω 2 kΩ 20 kΩ 200 kΩ 2 MΩ 20 MΩ |
| MAX Input Voltage | DC/AC 600 V |
| Diode Test | Maximum test current 1 mA, open circuit voltage typical value 1.5 V |
| Continuity Test | When resistance <150?, an alarm sounds |
| Display | 2000-count LCD display |
| Overload Protection | The screen displays "OL" when overloaded |
| Polarity | "-" indicates negative pole |
| Low battery indication | When the battery is low, the screen displays "BAT" |
| Input Resistance | >7.5 MΩ (DC and AC voltage) |
| AC Voltage Frequency | 50-60Hz |
| Auto Shutdown | About 15 minutes |
| Fuse | mA, μA range; 0.2 A/250 V fast-blow fuse |
| Battery | 9 V battery and two "AAA" batteries |
| Operating Conditions | 0~40 ℃(32~104℉) |
| Storage Temperature | -10~50 ℃(14~122℉) |
| Standard | IEC61010-1 CAT III-600V |
| Pollution Degree II, | Complies with CE standards |
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Constant-Temperature Water Bath Test Equipment
Other Measurement Instruments
Huayazhuhai
Voltage: 220V10A Gas pressure: 0.4~0.7MP Industrial computer: IPC+WIN10
For smartwatches, the equipment scans a QR code to identify each watch and connects by Bluetooth to transfer test data. One tray holds 16 products for simultaneous constant-temperature testing at 37 degrees +0.1 degree. A precision controller heats the water to simulate human body temperature. Fully immersed watches read 60 sets of temperature data according to thresholds. Data is transferred by phone Bluetooth, uploaded to Mes and compared with actual temperature. Calibration and testing are provided.
-
Smart-Wristband MMI Automated Test Equipment
Other Measurement Instruments
Huayazhuhai
LCD Color: Screen Dead Pixels, Bright Pixels, Dead Lines, Stripes, Stains, Dark Clumps, Light Transmission, Light Leakage and Shavings Charging Current Test: Current Acquisition, Threshold 270MA~330MA Motor Testing [±10HZ]: Amplitude 200HZ±10HZ
Designed specifically for smart wristbands, this equipment tests Bluetooth connectivity and communication, photography and QR-code scanning with information upload, LCD operation, brightness, current, motor operation, A+G and NFC.
-
Hermeticity Test Equipment
Other Measurement Instruments
Huayazhuhai
Differential Pressure-Resolution: 0.1Pa Differential Pressure-Display Range [(Guaranteed Accuracy Range ±1000Pa)]: ±999.9pa (accuracy guaranteed over ±1000Pa) Differential Pressure-Accuracy [±2.5%; but 2Pa below 50Pa]: ±2.5%3fdg:1Pa; 2Pa below 50Pa
This independently developed compact benchtop airtightness tester has been adopted through cooperation with multiple customers, receiving favorable feedback and repeat purchases. Its simplified construction and high test accuracy meet high-throughput production requirements.
-
Network Cable Tracer
Other Measurement Instruments
Lifo-fj
Power Supply: DC 9V Battery Electricity consumption: 15mA Signal Transmission Format: Multitone Audio Pulses
-
Whisper Excitation Module-Whisper Plus Series
Other Measurement Instruments
Pavilionintegration
Wavelength: 375 nm - 1064 nm Power: Up to 250mW RMS Noise (20Hz - 20MHz): < 0.1%
PIC's Whisper Plus series upgrades Whisper with diode-based CW solid-state technology, ultralow noise, better efficiency than DPSS/gas lasers and high cost effectiveness. Proprietary WhisperIT® eliminates mode hopping and minimizes optical noise. The range includes Whisper Plus, WMN Plus and WCP Plus. Internal beam shaping provides focused spots matched to flow cytometry. Improved optical power, stability and beam quality make it ideal for flow applications. Compact size simplifies installation, integration into existing instruments and one-step replacement/maintenance. Very long life and low consumption provide a highly reliable, economical flow-application solution.
Related Articles
Medical disposable‑device manufacturers have long demanded high‑performance interconnect accessories for single‑use equipment. The newly‑launched REDEL‑P disposable‑connector family addresses this requirement and delivers premium‑grade electrical connections for varied one‑time‑use medical instruments.
A microlens array (MLA) is a high-precision optical component composed of hundreds or thousands of tiny, uniformly arranged micro lenses on a single flat substrate. Unlike traditional single lenses that focus one light beam, a microlens array can split, homogenize, and reshape light on a micro scale. It is widely paired with VCSELs, lasers, and image sensors, becoming a core part of modern miniature optical systems.
BEIJING JIEPU TREND supplies YAG+Er:YAG+YAG bonded composite slab laser crystals for high‑power solid‑state laser systems. The monolithic slab consists of two undoped YAG end‑cap layers and a central Er‑doped YAG gain segment. The overall dimension is 9 mm×9 mm×9 mm.
Driven by the rapid upgrading of industrial automation, high-precision displacement sensing technology has become a core foundation of intelligent manufacturing.
Loading...
Name
Phone
Organization
Use Case
Database Platform