TP300 Transmission Immersion Probe (for Harsh Environments) (TP300-VIS-NIR)
TP300-UV-VIS is a transmission immersion probe that can be connected with our spectrometers and light sources to measure absorbance and transmittance in harsh environments. TP300-UV-VIS is a chemically inert PEEK transmission probe that can be mounted on a tip (RT-PH type) so that a transmission membrane can be installed in the optical path. Light passes through an optical fiber, through the assembled membrane to the lens. It is then redirected back through the membrane to a receiving optical fiber, which returns the light to the spectrometer. The sample can flow freely on either side of the membrane. TP300-UV-VIS can be used for routine transmittance measurements by using the RTP-2-10 (2-10 mm adjustable) transmission head. Probe Assembly The TP300-UV-VIS consists of two 300-µm optical fibers, one light source fiber and one red fiber, assembled in a 3.175-mm outer diameter stainless steel ring, and the stainless steel ring is then sealed with a PEEK jacket. You can also choose to assemble it with radiation-resistant fiber and UV-NIR fiber. PEEK Sleeve The PEEK sleeve is shown in the top figure and can be used up to a maximum of 200 degrees. PEEK material is not only radiation-resistant and flame-retardant but also has excellent chemical resistance. The PEEK sleeve (TPSLEEVE) is sold together with TP300-UV-VIS, and the stainless steel jacket shown in the figure on the right (T300SLEEVE) can also be used. Transmission Immersion Probe - Working Principle In the immersion transmission probe, light is transmitted through an optical fiber, passing through a plano-convex lens and a sample cell, to a flat double-sided mirror. The light is reflected from this mirror and focused by the lens onto the readout fiber. The advantage of the transmission probe is its compact optical design, which allows it to be accommodated within a 1.4" outer diameter stainless steel body or metal ring. By alternating these probes, it is possible to measure transmitted light and backscattered light from the sample and to generate internal reflected light within the dynamic range that limits the measurement. This immersion probe is a cost-effective choice for many on-line control and laboratory applications. Probe cap with adjustable pathlength
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Fiber Type | 300 m VIS-NIR Optical Fiber |
| Outer Diameter | The outer diameter of the internal stainless steel assembly is 3.17 mm; the outer diameter of the PEEK sleeve is 6.35 mm |
| Probe length | 107.9 mm |
| Fiber length | 2 m |
| Optical Fiber Components | Fused silica |
| Pressure limit | 100 psi |
| Temperature Limit [PEEK Sleeve] | PEEK Sleeve up to 200º C |
| Optical Path Length | Adjustable pathlength from 2-10 mm (RTP-2-10) or 10-20 mm (RTP-10-20); RT-PH fixed pathlength 16 mm |
| Optical Fiber Jacket | PVDF |
| Connector | SMA 905 |
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
CC-3 cosine corrector for radiant light collection
Fiber Probes
Gzbiaoqi
Diffusing material: Milky white glass Wavelength Range: 350-1000 nm Dimensions: 6.35 mm OD
Optional probe When the CC-3 and CC-3-UV are mounted at the end of a fiber, the cosine corrector and the fiber form a radiation probe. This probe is connected to an Ocean Optics spectrometer to measure the radiant intensity of light at the probe's surface. Direct connection CC-3-DA can be connected directly to the SMA 905 connector of the USB2000, HR4000, or S2000 spectrometer, forming a complete spectrometer system without a connecting cable, with no need for a fiber. Diffusing material: UV-VIS or VIS-NIR The diffusing material of the cosine corrector can be a milky-white, thin glass disk ((350-1100 nm) or Spectralon (200-1100 nm), located at the end of the stainless steel sleeve.
-
CC-3 cosine corrector for radiant light collection (CC-3-UV)
Fiber Probes
Gzbiaoqi
Diffusing material: Spectralon Wavelength Range: 200-1100 nm Dimensions: 6.35 mm OD
Optional probe When the CC-3 and CC-3-UV are mounted at the end of a fiber, the cosine corrector and the fiber form a radiation probe. This probe is connected to an Ocean Optics spectrometer to measure the radiant intensity of light at the probe's surface. Direct connection CC-3-DA can be connected directly to the SMA 905 connector of the USB2000, HR4000, or S2000 spectrometer, forming a complete spectrometer system without a connecting cable, with no need for a fiber. Diffusing material: UV-VIS or VIS-NIR The diffusing material of the cosine corrector can be a milky-white, thin glass disk ((350-1100 nm) or Spectralon (200-1100 nm), located at the end of the stainless steel sleeve.
-
CC-3 cosine corrector for radiant light collection (CC-3-DA)
Fiber Probes
Gzbiaoqi
Diffusing material: Spectralon Wavelength Range: 200-1100 nm Dimensions: 12.7 mm OD
Optional probe When the CC-3 and CC-3-UV are mounted at the end of a fiber, the cosine corrector and the fiber form a radiation probe. This probe is connected to an Ocean Optics spectrometer to measure the radiant intensity of light at the probe's surface. Direct connection CC-3-DA can be connected directly to the SMA 905 connector of the USB2000, HR4000, or S2000 spectrometer, forming a complete spectrometer system without a connecting cable, with no need for a fiber. Diffusing material: UV-VIS or VIS-NIR The diffusing material of the cosine corrector can be a milky-white, thin glass disk ((350-1100 nm) or Spectralon (200-1100 nm), located at the end of the stainless steel sleeve.
-
FL-400 fire-resistant fiber optic probe
Fiber Probes
Gzbiaoqi
Fiber core diameter: 400 微米 Probe length: 7" Outer diameter: 20 gauge (0.0355")
; High-temperature fiber; The FL-400 flame-retardant fiber optic probe includes an 8-inch-long nickel sleeve, inside which is placed a 400µm high-temperature-resistant UV-VIS fiber, and the fiber's protective layer is a gold-plated surface. The probe is connected through a coupling sleeve to a standard SMA-interface fiber, and the fiber is connected to a spectrometer to measure the radiation spectrum.; Spectrometer teaching tool; The FL-400 fire-resistant fiber optic probe is particularly suitable for radiation measurement with CHEM4 series spectrometers (low-cost UV-VIS spectrometers for laboratory teaching), serving as a teaching tool for spectrometers. It can be used mainly in two ways:; Insert it into a radiating sample environment up to a maximum of 750 degrees Celsius; By adding a standard platinum or nickel coil at the head of the probe to measure the radiation spectrum of the flame of experimental substances, such as sodium, potassium, calcium, copper, etc.; Related experiments used to understand radiation measurement; Specifications; The following specifications apply to the probe composed of a gold-plated protective-layer fiber and a nickel sleeve.; Components; The probe, fiber, and coupling sleeve can be purchased as a set or separately.
-
Attenuated Total Reflectance Probe (PRO-PROBE-ATR)
Fiber Probes
Gzbiaoqi
Outer Diameter: 12.7 mm (0.5"), optionally 12 mm (0.47") Probe length: ~305 mm Body Material: 316 stainless steel (Hastelloy C, titanium, and Monel alloy also available)
The ATR probe is the ideal product for measuring samples with absorbance of 4000-5000 AU/cm. It can be inserted directly into the sample to obtain a spectrum without diluting the sample. In addition, if the refractive index of the deposit material at the probe tip is greater than the refractive index of the sapphire crystal of the ATR probe, or greater than 1.7, the ATR probe can be used as a general-purpose probe.
Related Articles
Shandong Haucore Optoelectronics Co., Ltd. introduces the HGLD‑792‑COS‑D‑10WB semiconductor laser within its COS series. Delivering an output power of 10 W at a central wavelength of 792 nm, this device adopts gold‑tin bonding COS packaging. Featuring high reliability and long service life, it serves as a preferred pump source for solid‑state lasers and is widely deployed in industrial processing, laser display, medical & aesthetic treatment, scientific research and other fields.
Founded in 2004, Wuhan Union Optic Inc. is a National Specialized, Refined, Unique & Innovative "Little Giant" high-tech enterprise located in Wuhan East Lake High-Tech Development Zone.
As premium broadband light sources situated between traditional LEDs and laser diodes, MicroLight superluminescent‑diode (SLD) products combine broad spectral bandwidth, sufficient optical output power and low‑coherence performance.
Fiber lasers and fiber amplification systems require excitation sources with stable wavelength, narrow spectral linewidth and consistent output power.
Loading...
Name
Phone
Organization
Use Case
Database Platform