TI300 Industrial Immersion Transmission Probe (TI300-VIS-NIR)
Up to 250 psi and 300 °C. Our TI300 series industrial immersion transmission probes can be used in environments up to 250 psi and 300 °C. They use a 300 µm core diameter, with two options: TI300-UV-VIS (200-1100 nm) and TI300-VIS-NIR (400-2200 nm). Combined with our spectrometers and light sources, the TI300 probes can measure absorbance and transmittance in solutions of industrial processes. Probe and fiber jacket. The TI300 uses a stainless steel fiber jacket with an outer diameter of 0.68 cm. The immersion probe uses 303 stainless steel, 12.7 cm long with a 1.27 cm outer diameter. Sampling head with O-ring, can be replaced with epoxy. Like our other transmission probes, we use a high-grade epoxy for fixation. Ordinary epoxy loses its adhesion above 220 degrees. For the TI300 series, we use Parker perfluoroelastomer O-rings from the optical components on the probe to the sampling cap. The O-rings made of these special materials provide a wide range of chemical resistance, excellent thermal stability, and can withstand high temperatures up to 300 degrees. The material composing the nut is made of 3030 stainless steel. The path length of the sampling head is 2, 5, 10, 25 and 50 mm, so the setup for measuring samples can be done either by diluting the solution or by adjusting the path length. Working principle. In an immersion transmission probe, light travels through the optical fiber, passes through a plano-convex lens and a sample cell, and is delivered to a flat double-sided mirror. The light is reflected off this mirror and focused by the lens onto the read fiber. The advantage of the transmission probe is its compact optical design, which allows it to fit within a 1.4" OD stainless steel body or metal ring. By alternating the use of these probes, one can measure transmitted light and backscattered light from the sample, as well as internal reflected light that limits the dynamic range of measurement. This dip probe is a cost-effective choice for many on-line control and laboratory applications.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Wavelength Range | 400-2500 nm |
| Pressure limit | 250 psi |
| Temperature limit | 300 °C |
| Probe material | 303 stainless steel |
| Probe dimensions | Outer diameter 12.7 mm, material stainless steel |
| Jacket | Fully interlocked stainless-steel jacketing over Teflon tubing; total 6.8 mm outer diameter |
| Length [Fiber] | 2米 |
| Length [Probe jacket] | 12.7 cm |
| Length [Probe cap] | 2.6 cm to 4.99 cm |
| Immersion length | 12.7 cm |
| Optical Path Length | 2 mm, 5 mm, 10 mm, 25 mm ,50 mm |
| Fiber connection | SMA 905 |
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
CC-3 cosine corrector for radiant light collection
Fiber Probes
Gzbiaoqi
Diffusing material: Milky white glass Wavelength Range: 350-1000 nm Dimensions: 6.35 mm OD
Optional probe When the CC-3 and CC-3-UV are mounted at the end of a fiber, the cosine corrector and the fiber form a radiation probe. This probe is connected to an Ocean Optics spectrometer to measure the radiant intensity of light at the probe's surface. Direct connection CC-3-DA can be connected directly to the SMA 905 connector of the USB2000, HR4000, or S2000 spectrometer, forming a complete spectrometer system without a connecting cable, with no need for a fiber. Diffusing material: UV-VIS or VIS-NIR The diffusing material of the cosine corrector can be a milky-white, thin glass disk ((350-1100 nm) or Spectralon (200-1100 nm), located at the end of the stainless steel sleeve.
-
CC-3 cosine corrector for radiant light collection (CC-3-UV)
Fiber Probes
Gzbiaoqi
Diffusing material: Spectralon Wavelength Range: 200-1100 nm Dimensions: 6.35 mm OD
Optional probe When the CC-3 and CC-3-UV are mounted at the end of a fiber, the cosine corrector and the fiber form a radiation probe. This probe is connected to an Ocean Optics spectrometer to measure the radiant intensity of light at the probe's surface. Direct connection CC-3-DA can be connected directly to the SMA 905 connector of the USB2000, HR4000, or S2000 spectrometer, forming a complete spectrometer system without a connecting cable, with no need for a fiber. Diffusing material: UV-VIS or VIS-NIR The diffusing material of the cosine corrector can be a milky-white, thin glass disk ((350-1100 nm) or Spectralon (200-1100 nm), located at the end of the stainless steel sleeve.
-
CC-3 cosine corrector for radiant light collection (CC-3-DA)
Fiber Probes
Gzbiaoqi
Diffusing material: Spectralon Wavelength Range: 200-1100 nm Dimensions: 12.7 mm OD
Optional probe When the CC-3 and CC-3-UV are mounted at the end of a fiber, the cosine corrector and the fiber form a radiation probe. This probe is connected to an Ocean Optics spectrometer to measure the radiant intensity of light at the probe's surface. Direct connection CC-3-DA can be connected directly to the SMA 905 connector of the USB2000, HR4000, or S2000 spectrometer, forming a complete spectrometer system without a connecting cable, with no need for a fiber. Diffusing material: UV-VIS or VIS-NIR The diffusing material of the cosine corrector can be a milky-white, thin glass disk ((350-1100 nm) or Spectralon (200-1100 nm), located at the end of the stainless steel sleeve.
-
FL-400 fire-resistant fiber optic probe
Fiber Probes
Gzbiaoqi
Fiber core diameter: 400 微米 Probe length: 7" Outer diameter: 20 gauge (0.0355")
; High-temperature fiber; The FL-400 flame-retardant fiber optic probe includes an 8-inch-long nickel sleeve, inside which is placed a 400µm high-temperature-resistant UV-VIS fiber, and the fiber's protective layer is a gold-plated surface. The probe is connected through a coupling sleeve to a standard SMA-interface fiber, and the fiber is connected to a spectrometer to measure the radiation spectrum.; Spectrometer teaching tool; The FL-400 fire-resistant fiber optic probe is particularly suitable for radiation measurement with CHEM4 series spectrometers (low-cost UV-VIS spectrometers for laboratory teaching), serving as a teaching tool for spectrometers. It can be used mainly in two ways:; Insert it into a radiating sample environment up to a maximum of 750 degrees Celsius; By adding a standard platinum or nickel coil at the head of the probe to measure the radiation spectrum of the flame of experimental substances, such as sodium, potassium, calcium, copper, etc.; Related experiments used to understand radiation measurement; Specifications; The following specifications apply to the probe composed of a gold-plated protective-layer fiber and a nickel sleeve.; Components; The probe, fiber, and coupling sleeve can be purchased as a set or separately.
-
Attenuated Total Reflectance Probe (PRO-PROBE-ATR)
Fiber Probes
Gzbiaoqi
Outer Diameter: 12.7 mm (0.5"), optionally 12 mm (0.47") Probe length: ~305 mm Body Material: 316 stainless steel (Hastelloy C, titanium, and Monel alloy also available)
The ATR probe is the ideal product for measuring samples with absorbance of 4000-5000 AU/cm. It can be inserted directly into the sample to obtain a spectrum without diluting the sample. In addition, if the refractive index of the deposit material at the probe tip is greater than the refractive index of the sapphire crystal of the ATR probe, or greater than 1.7, the ATR probe can be used as a general-purpose probe.
Related Articles
Shandong Haucore Optoelectronics Co., Ltd. introduces the HGLD‑792‑COS‑D‑10WB semiconductor laser within its COS series. Delivering an output power of 10 W at a central wavelength of 792 nm, this device adopts gold‑tin bonding COS packaging. Featuring high reliability and long service life, it serves as a preferred pump source for solid‑state lasers and is widely deployed in industrial processing, laser display, medical & aesthetic treatment, scientific research and other fields.
Founded in 2004, Wuhan Union Optic Inc. is a National Specialized, Refined, Unique & Innovative "Little Giant" high-tech enterprise located in Wuhan East Lake High-Tech Development Zone.
As premium broadband light sources situated between traditional LEDs and laser diodes, MicroLight superluminescent‑diode (SLD) products combine broad spectral bandwidth, sufficient optical output power and low‑coherence performance.
Fiber lasers and fiber amplification systems require excitation sources with stable wavelength, narrow spectral linewidth and consistent output power.
Loading...
Name
Phone
Organization
Use Case
Database Platform