Three-port optical circulator
A three-port optical circulator is an optical device designed so that light entering any port exits from the next port. Working principle: if light enters port 1, it is emitted from port 2; but if some of the emitted light is reflected back into the circulator, it does not exit from port 1 but from port 3. Fiber optic circulators are used to separate optical signals traveling in opposite directions in a fiber, for example, to achieve bidirectional transmission on one fiber. Due to their high isolation of input optical power and reflected optical power and their low insertion loss, optical circulators are widely used in advanced communication systems and fiber optic sensor applications.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Configure | Port 1 to port 2, port 2 to port 3 |
| Operating Wavelength | 1310±30, 1550±30 |
| Insertion Loss | Typical |
| Insertion Loss | 0.7dB |
| Insertion Loss | 0.8dB |
| Insertion Loss | Maximum |
| Insertion Loss | 1.0dB |
| Insertion Loss | 1.1dB |
| Channel Isolation | >40dB |
| Channel Serial | >50dB |
| nm-1600nm | <0.15dB |
| The oscillations are scattered | <0.1ps |
| Return Loss | >50dB |
| Power | 300mW |
| Operating Temperature | 0 ~ +70°C |
| Storage Temperature | -40 ~ +85°C |
| Package Dimensions | Ø5.5 x L50 |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Circulator
Fiber Optic Circulators
Intpho
Wavelength: 780/835/1310/1550nm Optional Insertion Loss: ≤0.8dB Isolation: ≥30dB
-
Circulator
Fiber Optic Circulators
Dowell-optics
-
2x2 Polarization Maintaining Optical Circulator
Fiber Optic Circulators
Lightel
Center Wavelength: 1310 or 1550 Center Wavelength: 1310 or 1550 Operating Wavelength Range: ± 30
-
Polarization Maintaining Optical Circulator
Fiber Optic Circulators
Lightel
Center Wavelength: 1310 or 1550 Center Wavelength: 1310 or 1550 Operating Wavelength Range: ± 30
Related Articles
Fiber lasers and fiber amplification systems require excitation sources with stable wavelength, narrow spectral linewidth and consistent output power.
BEIJING JIEPU TREND supplies YAG+Er:YAG+YAG bonded composite slab laser crystals for high‑power solid‑state laser systems. The monolithic slab consists of two undoped YAG end‑cap layers and a central Er‑doped YAG gain segment. The overall dimension is 9 mm×9 mm×9 mm.
The MSL‑T series water‑cooled continuous‑wave single‑longitudinal‑mode lasers from Changchun New Industries Optoelectronics (CNI) deliver key research wavelengths including 369 nm, 405 nm and 770 nm.
Ytterbium‑doped fiber serves as the core energy‑conversion component inside a fiber laser. Pump light emitted by laser diodes is coupled into the gain fiber, and energy is transferred to signal laser beams via ytterbium ion energy‑level transition for power amplification. Two dominant pump wavelengths, 915 nm and 976 nm, have been widely adopted over decades. With the rapid progress of pump chip and wavelength‑locking technology, 976 nm edge‑emitting laser (EEL) pumps have gradually surpassed the 915 nm route and become the new industry mainstream. Shenzhen Lemon Photonics Technology Co., Ltd keeps developing high‑performance pump chips for fiber laser manufacturers.
Loading...
Name
Phone
Organization
Use Case
Database Platform