200M power supply
200M ( Q, ) Equipment. Core Functions ( Voltage, ), Device, Application, CW Power
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Output signal frequency | 200M |
| Operating Voltage | DC+24V±0.5V |
| Operating Frequency | 200M |
| Output Power | ≥3W |
| Output Power | ≥2.5W |
| Operating Current | ≤500mA |
| Interface requires signal output interface | SMA-K |
| The interface requires a control signal input interface | SMA-K |
| Interface requires power interfaces | I'm wearing a heart-breathing face |
| Output Power | Ø3mm，One-word multi-circle bits (Internal reconciliation) |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
1064nm-200MHz polarization-maintaining fiber G-1064-200-L-B-T-AA-G6-T-H
Acousto-Optic Modulator
Qingjin-oe
Material: TeO2 Wavelength: 1064 Average optical power handling: 3
-
Audio light modem
Acousto-Optic Modulator
Qingjin-oe
Unit ultrasound speed: m/s Unit turns: mrad Wavelength: 583
-
fiber coupling 1550nm 80mpm
Acousto-Optic Modulator
Zg-photonics
Material: Oxygen oxide Wavelength: 1530 nm/1550 nm/1565 nm（Other wavelengths may be requested） Power: 500mW
-
power supply
Acousto-Optic Modulator
Zg-photonics
Output signal frequency: 80MHz Operating Voltage: DC+24V±0.5V Operating Frequency: 80MHz
Related Articles
Fiber lasers and fiber amplification systems require excitation sources with stable wavelength, narrow spectral linewidth and consistent output power.
BEIJING JIEPU TREND supplies YAG+Er:YAG+YAG bonded composite slab laser crystals for high‑power solid‑state laser systems. The monolithic slab consists of two undoped YAG end‑cap layers and a central Er‑doped YAG gain segment. The overall dimension is 9 mm×9 mm×9 mm.
The MSL‑T series water‑cooled continuous‑wave single‑longitudinal‑mode lasers from Changchun New Industries Optoelectronics (CNI) deliver key research wavelengths including 369 nm, 405 nm and 770 nm.
Ytterbium‑doped fiber serves as the core energy‑conversion component inside a fiber laser. Pump light emitted by laser diodes is coupled into the gain fiber, and energy is transferred to signal laser beams via ytterbium ion energy‑level transition for power amplification. Two dominant pump wavelengths, 915 nm and 976 nm, have been widely adopted over decades. With the rapid progress of pump chip and wavelength‑locking technology, 976 nm edge‑emitting laser (EEL) pumps have gradually surpassed the 915 nm route and become the new industry mainstream. Shenzhen Lemon Photonics Technology Co., Ltd keeps developing high‑performance pump chips for fiber laser manufacturers.
Loading...
Name
Phone
Organization
Use Case
Database Platform