VarioCAM HDx head VC HDx head
VarioCAM HDx head Infrared, 640x480 Flat Surface Detector
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Spectrum Range | 7.5 ～14μm |
| Hot sensitivity | 30mK @30°C |
| Sub-window Mode | 60Hz @384×288 pixels |
| Digital Focus | Continuous scaling，Max32Double |
| Dynamic Range | 16 Bit |
| Temperature Method Selection | Automatic or manual |
| Focusing Method | Inline electric precise focus,Automatic or manual reconciliation |
| Image Transfer | GigE Vision ，OptionalDVI-D、C-Video、SDHCCut box |
| Image Storage | Single frame or continuum，YesGigE Vision To Computer Hard Disk |
| Software | Heat imager、Heat mapping analysis and management |
| Measurement Mode | Moveable Point or Area,Maximum lowest temperature automatic tracking,Line Temperature,Histogram,ΔtTwo point temperature differentials(Time、Location) |
| Temperature alarm | Could set a ceiling、Lower temperature warning value,Provide automatic sound or colour alert alerts |
| Colour Constellation | Setable10A hot line with high contrast colours |
| Atmospheric penetration correction | Auto,Based on input distance、Atmospheric temperature and relative humidity |
| Optical penetration correction | Auto,Internal sensor signals based on thermal imager |
| Reaction environment temperature correction | Auto,Reflecting temperature based on input |
| Window | Auto,Input-based Optical/Window penetration rate and temperature |
| Close-up | With standard lensesclose-up(Close Queue)Image function |
| Optical Lens | Card connection，Camera Specification Automatic Recognition |
| Relative Humidity | 10% ～95%No trace |
| Package | IP 54 ，OptionalIP67(Dustproof、Waterproof) |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
instrument
Infrared Imaging
Hikmicrotech
Optical Lens Focal Length: 25mm
-
Thermal like a gunball one
Infrared Imaging
Hikmicrotech
Visible light resolution: 400 × 10,000
-
CEM DT-9873B infrared thermal imager
Infrared Imaging
Cem-meter
Field of view/minimum focus distance: 29.8°×22.6°/0.2m（7.5mm Standard Lens） Space Resolution: 3.33 mrad Hot sensitivity: ＜0.08℃/80mK
-
CEM DT-9875 infrared thermal imager
Infrared Imaging
Cem-meter
Field of View Angle/Minimum Focusing Distance: 33°x 24°/ 0.3m Space Resolution: 3.33mrad Thermal sensitivity (NETD): ≤0.08℃ (30 ℃)
-
CEM DT-9885 infrared thermal imager (high resolution)
Infrared Imaging
Cem-meter
Field of View Angle/Minimum Focusing Distance: 33°x 24°/ 0.3m Space Resolution: 3.33mrad Thermal sensitivity (NETD): ≤0.08℃ (30 ℃)
Related Articles
Fiber lasers and fiber amplification systems require excitation sources with stable wavelength, narrow spectral linewidth and consistent output power.
BEIJING JIEPU TREND supplies YAG+Er:YAG+YAG bonded composite slab laser crystals for high‑power solid‑state laser systems. The monolithic slab consists of two undoped YAG end‑cap layers and a central Er‑doped YAG gain segment. The overall dimension is 9 mm×9 mm×9 mm.
The MSL‑T series water‑cooled continuous‑wave single‑longitudinal‑mode lasers from Changchun New Industries Optoelectronics (CNI) deliver key research wavelengths including 369 nm, 405 nm and 770 nm.
Ytterbium‑doped fiber serves as the core energy‑conversion component inside a fiber laser. Pump light emitted by laser diodes is coupled into the gain fiber, and energy is transferred to signal laser beams via ytterbium ion energy‑level transition for power amplification. Two dominant pump wavelengths, 915 nm and 976 nm, have been widely adopted over decades. With the rapid progress of pump chip and wavelength‑locking technology, 976 nm edge‑emitting laser (EEL) pumps have gradually surpassed the 915 nm route and become the new industry mainstream. Shenzhen Lemon Photonics Technology Co., Ltd keeps developing high‑performance pump chips for fiber laser manufacturers.
Loading...
Name
Phone
Organization
Use Case
Database Platform