VarioCAM HD head 980
VarioCAM HD head Series Infrared
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Detector | High-resolution non-refrigerant calorie focal plane detection Device |
| Sub-window Mode | 640×480 pixels @60Hz 384×288 pixels @120Hz 1024×96 pixels @240Hz |
| MicroScan | 2048x1536 pixel thermal image, can operate continuously, 2Hz |
| Spectrum Range | 7.5~14μm |
| Hot sensitivity | 20mK@30℃ |
| Digital Focus | Max 32 Double Zoom |
| Dynamic Range | 16 bit |
| Temperature scale | (-40 ～ +1200)℃ |
| Scale Conversion | Automatic or manual conversion |
| Measurement Mode | Automatic tracking of minimum temperature at moveable points or areas，Line Temperature，Histogram， △T, Two o'clock temperature difference( Time、Location ) |
| Temperature alarm | Could set a ceiling、Lower limit temperature alerts provide voice or colour automatic alerts |
| Colour Constellation | Setable 10 A hot line with high contrast colours |
| Atmospheric penetration correction | Automatically based on input distance、Atmospheric temperature and relative humidity |
| Optical penetration correction | Automatically based on internal sensor signals of thermal imager |
| Reaction environment temperature correction | Automatic input-based reflection temperature |
| Window | Auto，Input-based Optical / Window penetration rate and temperature |
| Focusing Method | Inline precise step-by-step modulation motor supports automatic and manual focus |
| Close-up | When using standard lenses， 10cm Optional for close imaging |
| Infrared | Single frame or continuum，Yes GigE Vision To Computer Hard Disk |
| Image Transfer Interface | GigE Vision, DVI-D, C-Video |
| Heat image handler interface | GigE Vision , Optional RS232,Trigger Simulate Output，Numbers I/O |
| Software | IRBIS 3 Infrared heat map management series，Heat map analysis，Online manipulation and real-time measurements and heat mapping |
| Power supply | Direct current power adapter 15VDC, PoE Electricity( Optional ) |
| Relative Humidity | 10% ～ 95% No trace |
| Package | IP54,IEC 529; Optional IP67 |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
instrument
Infrared Imaging
Hikmicrotech
Optical Lens Focal Length: 25mm
-
Thermal like a gunball one
Infrared Imaging
Hikmicrotech
Visible light resolution: 400 × 10,000
-
CEM DT-9873B infrared thermal imager
Infrared Imaging
Cem-meter
Field of view/minimum focus distance: 29.8°×22.6°/0.2m（7.5mm Standard Lens） Space Resolution: 3.33 mrad Hot sensitivity: ＜0.08℃/80mK
-
CEM DT-9875 infrared thermal imager
Infrared Imaging
Cem-meter
Field of View Angle/Minimum Focusing Distance: 33°x 24°/ 0.3m Space Resolution: 3.33mrad Thermal sensitivity (NETD): ≤0.08℃ (30 ℃)
-
CEM DT-9885 infrared thermal imager (high resolution)
Infrared Imaging
Cem-meter
Field of View Angle/Minimum Focusing Distance: 33°x 24°/ 0.3m Space Resolution: 3.33mrad Thermal sensitivity (NETD): ≤0.08℃ (30 ℃)
Related Articles
Fiber lasers and fiber amplification systems require excitation sources with stable wavelength, narrow spectral linewidth and consistent output power.
BEIJING JIEPU TREND supplies YAG+Er:YAG+YAG bonded composite slab laser crystals for high‑power solid‑state laser systems. The monolithic slab consists of two undoped YAG end‑cap layers and a central Er‑doped YAG gain segment. The overall dimension is 9 mm×9 mm×9 mm.
The MSL‑T series water‑cooled continuous‑wave single‑longitudinal‑mode lasers from Changchun New Industries Optoelectronics (CNI) deliver key research wavelengths including 369 nm, 405 nm and 770 nm.
Ytterbium‑doped fiber serves as the core energy‑conversion component inside a fiber laser. Pump light emitted by laser diodes is coupled into the gain fiber, and energy is transferred to signal laser beams via ytterbium ion energy‑level transition for power amplification. Two dominant pump wavelengths, 915 nm and 976 nm, have been widely adopted over decades. With the rapid progress of pump chip and wavelength‑locking technology, 976 nm edge‑emitting laser (EEL) pumps have gradually surpassed the 915 nm route and become the new industry mainstream. Shenzhen Lemon Photonics Technology Co., Ltd keeps developing high‑performance pump chips for fiber laser manufacturers.
Loading...
Name
Phone
Organization
Use Case
Database Platform