LG cabinet-based fibre-optic lasers (electrician)
LG series fibre-optic laser laser beams of good mass; TEM00 single-module output; lasers that pass straight; beams of high diameter consistency; and small dispersive angles. In particular, it applies to demanding precision and precision marking. The fine and complex patterns required by the user can be marked on very small surfaces; they are called by the customer a true “the King of Marks”. Product advice, order can be made by calling 027-87180310 to click here; direct access to purchase links,
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Name of average output power | 20W |
| Pulse repeat frequency | 30~60kHz |
| Scan speed | F=160mm,≤7000 mm/s |
| F 160mm | min: 0.2mm @ F=160 mm |
| F 254mm | min: 0.2mm @ F=160 mm |
| Handheld | Enterprise-level worker controller with LCD monitor |
| Elevator | Named Process: 300mm |
| System power supply | 1.0 KW/AC220V/50Hz voltage range ± 5%, which, if exceeded, would require the preparation of pressurers.; 1.0 KW/AC220V/50Hz voltage range ±5%, which, if above the voltage range, requires the preparation of pressurers |
| Local | The grid line meets national standards |
| Temperature of environment | 0~40°C for air conditioners when overused |
| Environmental humidity | 30% RH 85% (relative humidity of RH: the ratio of the quality of water vapour in a wet air to the quality of water vapour in the same temperature and air pressure saturated air, expressed as a percentage).) Equipment in excess of the humidity range is exposed to the risk of exposure and air conditioning when used. 30% RH 85% (relative humidity of RH: the ratio of the quality of water vapour in a wet air to that of water vapour in the same temperature and air pressure, expressed as a percentage.) Equipment in excess of the humidity range is at risk of condensation and air conditioning is required when used |
| Oil fog | Not permitted |
| Crush | Not permitted |
| Compressed gas | Compressed air provided with 0.5-0.7 Mpa, with no visible vapour and grease. Use of formulation aerobic parts |
| Other requirements | Ground-based amplitude: less than 50m; vibration acceleration: less than 0.05g. Large quantities of machine-bed equipment, such as pressure, are avoided in the vicinity. The equipment space requires the assurance of smoke-free and dust-free work environments that avoid heavy dust conditions such as metal polishing. No strong electromagnetic interference. There is also some operational and maintenance space; ground-based amplitude: less than 50um; vibration acceleration: less than 0.05g. Large quantities of machine-bed equipment, such as pressure, are avoided in the vicinity. The equipment space requires the assurance of smoke-free and dust-free work environments that avoid heavy dust conditions such as metal polishing. No strong electromagnetic interference. And leave some room for operation and maintenance |
Applications
Key Features
Datasheet
Supplier Information
Related Products
-
ATM50 Fully Automatic Laser Coding Equipment (On boat)
Laser Processing Equipment
Delphilaser
Slot Type Magazine-Product Length: 100-320mm Slot Type Magazine-Product Width: 45-180mm Slot Type Magazine-Handler slot magazine Capacity [Calculated for 180 x320mm]: 2 (Calculated for 180 x320mm)
This equipment uses a laser to mark individual devices on a BOAT with customized QR codes, characters, LOGO and other patterns.
-
ATM90 Fully Automatic Laser Marking Machine (MiniQFN)
Laser Processing Equipment
Delphilaser
Workpiece Dimensions: Max 280 x 100mm；Min 150 x 60mm Print Content: 2D, Logo, PIN, Text Printing Specifications-Depth Control: ±6um
Fully automatic laser marking of packaged semiconductor Mini QFN products.
-
BUSBAR Laser Cleaning Equipment
Laser Processing Equipment
Delphilaser
Equipment Dimensions: L2.5m×W2.0m×H2.7m Terminal Cleaning Area: 160 mm × 160 mm
BUSBAR laser cleaning for new-energy battery modules.
-
BUSBAR Laser Welding Equipment
Laser Processing Equipment
Delphilaser
Equipment Dimensions: L2.8m×W2.0m×H2.7m Equipment Operating Efficiency [Calculated by Battery Cell Count]: ≥10PPM(Calculated by Battery Cell Count) Compatible Battery Modules: L1200mm×W200mm×H240mm
BUSBAR laser welding for new-energy battery modules.
-
DPC Ceramic Substrate Rapid Drilling Equipment RPS10
Laser Processing Equipment
Delphilaser
Equipment Type: Single Head Working area: 250mm×250mm/450mm×450mm(customizable) Positioning accuracy: ±3μm
Depending on thickness, material and processing-quality requirements, drilling or cutting equipment can be selected for drilling, cutting or punching most DPC ceramics, including alumina (Al2O3), aluminum nitride (AlN) and zirconia (ZrO2).
Related Articles
Founded in 2019, Jilin JC Ultrafast Equipment Co., Ltd. is a high-tech enterprise incubated by the Ultrafast Optoelectronics Center of Jilin University. Our R&D team owns 15 years of profound experience in femtosecond laser micro-nano fabrication.
Driven by the rapid upgrading of industrial automation, high-precision displacement sensing technology has become a core foundation of intelligent manufacturing.
Founded in 2003, BWT Beijing Optoelectronics adheres to the mission "Let Dreams Fly With Light" and vision of becoming a Global Leader in Laser Solutions, guided by the core value "Innovate to Achieve Extraordinary".
On November 28, 2024, the 3rd China Laser Star Enterprise Summit & Advanced Laser Processing Technology Summit, an annual influential event in the laser industry, was grandly held in Wuhan Optics Valley.
Loading...
Name
Phone
Organization
Use Case
Database Platform