GH-U Ultraviolet Laser Marker (Electron)
The current trend for end-pump lasers is towards ultraviolet lasers and narrow veins. Relatively; less UV pump laser focus light diameter; more sophisticated marking; comparison of infrared pump; high absorption of UV light by metal; and more suitable for marking on metal and glass material. The narrow pulse width of lasers and process materials has a short duration; thermal effects are low; and the markings are more beautiful. The Chinese laser GH-3U UV laser is very small in focus light; and t
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Laser center wavelength | 355nm |
| Name of average output power | >3W@40kHz |
| Pulse repeat frequency | 20k~200kHz |
| Scan speed | F=170mm,≤7000 mm/s |
| F 170 mm | min: 0.1mm @ F=170 mm |
| F 210 mm selection | min: 0.1mm @ F=170 mm |
| F 254 mm selection | min: 0.1mm @ F=170 mm |
| Handheld | Enterprise-level worker controller with LCD monitor |
| Elevator | Manual, nominal process: 300 mm |
| System power supply | 2.0KW/AC220V/50Hz voltage range of 5%, which, if beyond the voltage range, requires the preparation of pressurers.; 2.0 KW/AC220V/50Hz voltage range ±5%, which, if above the voltage range, requires the preparation of pressurers |
| Local | Category D [100 ground resistance or lower] |
| Temperature of environment | 15 ~ 35°C, air conditioners required for out-of-scope use |
| Environmental humidity | The ratio is expressed as a percentage of the mass of water vapour in a wet air relative to that contained in the saturated air at the same temperature and under air pressure.) Equipment in excess of the humidity range is exposed to exposure and air conditioners are required to be installed when used. 30% is 80% wet (RH relative humidity refers to the mass of water vapour in a wet air relative to the mass of water vapour in the same temperature and air pressure and this ratio is expressed as a percentage.) Equipment in excess of the humidity range is at risk of condening and air conditioning is required when used |
| Vibration | 0.98m/s^2{0.1G or less, 10~60Hz. For transport: 4.9 m/s^2{0.5 G} or less |
| Oil fog | Not permitted |
| Crush | Not permitted |
| Compressed gas | Compressed air provided with 0.5-0.7 Mpa, with no visible vapour and grease. Use of formulation aerobic parts |
| Other requirements | Ground-based amplitude: less than 50m; vibration acceleration: less than 0.05g. Large quantities of machine-bed equipment, such as pressure, are avoided in the vicinity. The equipment space requires the assurance of smoke-free and dust-free work environments that avoid heavy dust conditions such as metal polishing. No strong electromagnetic interference. And leave some room for operation and maintenance.; ground-based amplitude: less than 50um; vibration acceleration: less than 0.05 g. Large quantities of machine-bed equipment, such as pressure, are avoided in the vicinity. The equipment space requires the assurance of smoke-free and dust-free work environments that avoid heavy dust conditions such as metal polishing. No strong electromagnetic interference. And leave some room for operation and maintenance |
Applications
Key Features
Datasheet
Supplier Information
Related Products
-
3C small lasers LSF20TC
Laser Processing Equipment
Hglaser
Pulse repeat frequency: 30~60kHz Optical properties: min: 0.2mm @ F=160 mm
Mechanical features High precision CCD system positioning; high processing accuracy Sport platform loaded with custom kits; multiple product processing; time-efficient and well-protected design; operational security
-
3C small lasers LSF30H
Laser Processing Equipment
Hglaser
Pulse repeat frequency: 10~1000kHz Optical properties: min: 0.2mm @ F=160 mm
Mechanical features High precision CCD system positioning; high processing accuracy Sport platform loaded with custom kits; multiple product processing; time-efficient and well-protected design; operational security
-
3DLaser Glass Rewinding Smart Device
Laser Processing Equipment
Hglaser
Average output power: ＞60W Applicable products: CG, BG, UTTG glass
It is mainly applied during the deep processing of glass; the process of opening materials is made of lasers + reverse angles once; no CNC sculpture is required; glass is deep-processed for revolutionary products; and products such as cell phones are processed for CG, BG, etc. Use of the most advanced global laser optical integrator technology to form laser beams into type C or type R beams; release of laser beams in space range; 3D space processing capability; one cutting into shape; formation of a reverse angle
-
3D laser tag large face series
Laser Processing Equipment
Hglaser
Device Model: LHC150V Laser Light: CO2
An efficient, high-precision, large-face specialty product for laser processing such as coating, marking, cutting, sculpture, varnish processing, microthermal processing of material surfaces. 01 High-power metallic radio-frequency pipe CO2 lasers; power output stability; more refined processing effect 02 Dynamic focus large surface technology; integration of marking, piercing, cutting; large range 03 Seal dust protection design; easy equipment maintenance 04 for pen electric casings; and leather, fabric, paper, wood, etc
-
AIDC Thermal Management System, Manifold Disposer laser welding equipment
Laser Processing Equipment
Hglaser
The Manifold sub-liquidator is an efficient dispersor; its unique design enables cooling liquids to be distributed evenly and rapidly to servers or equipment; thus achieves efficient heat transfer and equipment temperature control; Manifold has n interfaces and end-ends that require sealed welding; Manifold automatically sealed welded using continuous laser welding equipment; and applies to stainless steel, aluminium, etc
Related Articles
Precise spectral screening is essential for high-precision medical detection, spectroscopic analysis and intelligent imaging systems. Tailored for visible and near-infrared spectral separation, the SP900 shortpass optical filter delivers high-efficiency light transmission and deep infrared blocking performance. It effectively eliminates stray light interference, improves signal-to-noise ratio (SNR), and serves as a core optical component for biomedical instruments, scientific analysis equipment and machine vision systems.
Driven by the rapid upgrading of intelligent vehicles, optoelectronic sensing technologies represented by laser sensing and infrared thermal imaging have become core pillars for high-level autonomous driving and smart cockpit iteration. Leveraging automotive-grade optoelectronic R&D advantages, Pilot Technology Group launches the VITAL intelligent vehicle solution. By integrating high-power VCSEL laser chips and vehicle infrared night-vision thermal imagers, the system comprehensively enhances vehicle environmental perception and realizes safer, smarter and more comfortable driving experiences.
In UV laser testing, UV spectroscopy and lithography optical experiments, excessive light intensity will lead to detector saturation, optical component damage and overexposed imaging.
Founded in 2003, BWT Beijing Optoelectronics adheres to the mission "Let Dreams Fly With Light" and vision of becoming a Global Leader in Laser Solutions, guided by the core value "Innovate to Achieve Extraordinary".
Loading...
Name
Phone
Organization
Use Case
Database Platform