Handheld single channel to tune light source
Hand-held truncable source TSP series sub-channels (TSP-100) and dual channel (TSP-200) products; a portable, compact, truncable source of light; the adoption of precision control systems; the assurance of its high and stable wavelength and power output; the possession of high-output photopower and high-side depressive ratio; narrow-line wide-light output; and its wide application in related areas. The other product is equipped with OLED screens and entity buttons; it is also available; it is us
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Number of channels | 1; 2 |
| Power Settings Range | C-band: 9~15.5 dBm |
| Output power precision | ±1dB |
| Wavelength range | C-band: 1528.77 ~ 1567.13nm |
| Frequency fine-adjusted resolution | 1MHz |
| Frequency fine-tuning range | ±6GHz |
| Communications interface | USB2.0 |
| Enter voltage | DC15V/3A |
Applications
Datasheet
Supplier Information
Related Products
-
SLM-DD series
Display Technologies
Thermo-test
The SLM-D series of air springs has a viscosity barrier inside the embossed pad foot;
-
SLM-DD High-Damping Air Spring
Display Technologies
Thermo-test
Base Dimensions: 96; 138; 205; 255; 300; 360; 430 SLM 12B -D1/DD1: 75 Ni: ±6
Structures;
-
Desktop QCL laser controller OQLD series
Display Technologies
Ovlink
Control parameters: LD output current; 10; 5000; MA; TEC output currents; -15; 15; A Mode: Pulse ranges; 0.1-1000; ms Internal Modem: Bandwidthing; 0.02; 100; kHz
The OQLD series is a controller for quantum cascade lasers; supports the quasi-continuous wave (QCW) working mode and internal simulations. Provides accurate and stable currents; controls through front-board buttons and the visualization of LCD monitors. Very suitable for medium high power semiconductor laser applications. Support internal simulation output, support high-power quantum cascade lasers (QCL). Support continuous (CW) or quasi-continuous (QCW) mode operations
-
SLM Precision Metal 3D Print Series equipment LSP140
Display Technologies
Hglaser
LSP140 is a high-value, metal 3D printing device designed specifically for scientific research, education and research and development; the introduction of powder delivery structures; the simplification of the process of powdering without adding; the alignment of compact design; and significant space savings. Equipment integration for permanent filtering cores; effective reduction of maintenance costs; support for 500 W high power lasers; ensure print accuracy and efficiency. Only 5 kg of single powdering is required; the demand for diversified printing is met; it is an ideal option for laboratories, universities and small research and development centres
Related Articles
A laser bar is an array semiconductor laser chip integrated with dozens of emitters, which realizes hundred-watt quasi-continuous output on a single chip. With regular emitter arrangement and controllable fill factor, integrated thermal design and superior wall-plug efficiency compared to single chips, it acts as the core light source for high-power pumping, medical lasers and precision processing.
Driven by the continuous pursuit of higher precision and efficiency in optical communication and optoelectronic device manufacturing, OLCR-1000 Low-Coherence Interferometer, independently developed by Wuhan Guanggu Interconnect Technology Co., Ltd., provides an innovative technical solution for distributed return loss testing of optical fibers and optoelectronic devices.
Fluoride crystal glass and K9 optical glass are two core optical substrates widely used in precision optical systems, laser equipment and photoelectric scientific research.
For pulsed laser and full-spectrum optical testing, photodiodes and thermopiles have inherent drawbacks. Photodiodes show weak response in infrared band, while thermopiles feature slow response and cannot capture nanosecond narrow pulses.
Loading...
Name
Phone
Organization
Use Case
Database Platform