TEDIASENS wireless
• Recording signals from multiple sensors — synchronized data sampling — wireless data transmission through WLAN — powering through municipal electricity or accumulators — TEDIASENS is particularly suitable for testing services through any
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Sensor interface | BNC/ |
| Offset | 1 mV; 10 mg |
| Bandwidth noise | 20 μV; RMS@ 13 kS/s @ ±1 V; 40 μV; RMS@ 13 kS/s @ ±10 V; 1 mg( ) |
| Enter electrical resistance | 100 kOhm |
| Gain Error | 0.04%; 114.1×63.5×30 mm |
| Assessing gains and errors in electronic equipment | 0.2% |
| Gain Error of Embedded Sensor | ±3% |
| Cross-sensitivity of embedded sensors | 7% |
| Sample Rate | 13000 Hz |
| Synchronization | 1μs |
| Signal-to-Noise Ratio | 109.5 dB |
| Maximum frequency | 0.49×fs |
| Data rate per node | 1 Mbit/s |
| Sensor node for each system | ≤ 40 |
| Battery technology | Lithium Battery |
| Charge voltage | 4.25‐5.5 V |
| Power Supply Input | 1.5 A; 0.3 A |
| Control Input | 1 ( / / ) |
| Antenna | RP‐SMA |
| Power connector | Binder 707 M5×0.5 |
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
MPCTL-01A Point-Movement Control Board (Motion Control for a Single Stepper Motor or Piezo Actuator)
Motors and Drives
Shafan-oe
Supply voltage [For Different Interfaces; Only One May Be Connected at a Time]: 12-24VDC or 5VDC for Different Interfaces; Only One May Be Connected at a Time Operating temperature: -40-+60° Operating humidity: 0-95%
The MPCTL-01A spot-shifting control board controls one motor or piezoelectric actuator to shift a motor-driven crystal or object. RS232 communication and adjustable parameters use a simple ASCII protocol for easy integration.
-
Galvanometer motor series MT0824
Motors and Drives
Jhckj
Beam spot on the loaded mirror: 3 mm Mechanical deflection angle: ±11 ° Rotor moment of inertia [±10%]: 1.34 g*mm²
A galvanometer system is a high-precision, high-speed servo-control system comprising a drive board and a high-speed oscillating motor. The scanning motor is critical to the system. Jhckj scanning motors are compact, thermally efficient, and have long bearing life, enabling high-speed, highly reliable scanning in confined spaces.
-
Galvanometer motor series MT1440
Motors and Drives
Jhckj
Beam spot on the loaded mirror: 10 mm Mechanical deflection angle: ±11 ° Rotor moment of inertia [±10%]: 14.651 g*mm²
A galvanometer system is a high-precision, high-speed servo-control system comprising a drive board and a high-speed oscillating motor. The scanning motor is critical to the system. Jhckj scanning motors are compact, thermally efficient, and have long bearing life, enabling high-speed, highly reliable scanning in confined spaces.
-
Galvanometer motor series MT1443
Motors and Drives
Jhckj
Beam spot on the loaded mirror: 10 mm Mechanical deflection angle: ±11 ° Rotor moment of inertia [±10%]: 27.34 g*mm²
A galvanometer system is a high-precision, high-speed servo-control system comprising a drive board and a high-speed oscillating motor. The scanning motor is critical to the system. Jhckj scanning motors are compact, thermally efficient, and have long bearing life, enabling high-speed, highly reliable scanning in confined spaces.
-
Galvanometer motor series 1603
Motors and Drives
Jhckj
Beam spot on the loaded mirror: 10 mm Mechanical deflection angle: ±11 ° Rotor moment of inertia [±10%]: 20.01 g*mm²
A galvanometer system is a high-precision, high-speed servo-control system comprising a drive board and a high-speed oscillating motor. The scanning motor is critical to the system. Jhckj scanning motors are compact, thermally efficient, and have long bearing life, enabling high-speed, highly reliable scanning in confined spaces.
Related Articles
For pulsed laser and full-spectrum optical testing, photodiodes and thermopiles have inherent drawbacks. Photodiodes show weak response in infrared band, while thermopiles feature slow response and cannot capture nanosecond narrow pulses.
Driven by the rapid upgrading of intelligent vehicles, optoelectronic sensing technologies represented by laser sensing and infrared thermal imaging have become core pillars for high-level autonomous driving and smart cockpit iteration. Leveraging automotive-grade optoelectronic R&D advantages, Pilot Technology Group launches the VITAL intelligent vehicle solution. By integrating high-power VCSEL laser chips and vehicle infrared night-vision thermal imagers, the system comprehensively enhances vehicle environmental perception and realizes safer, smarter and more comfortable driving experiences.
As premium broadband light sources situated between traditional LEDs and laser diodes, MicroLight superluminescent‑diode (SLD) products combine broad spectral bandwidth, sufficient optical output power and low‑coherence performance.
Driven by worldwide energy‑structure transformation, the lithium‑ion battery industry is expanding rapidly as green, high‑efficiency energy‑storage devices gain surging global market demand. With years‑long dedication to intelligent manufacturing, Han’s Laser Lithium‑battery Intelligent Equipment has accumulated solid R&D strength and rich practical experience. By integrating multiple cutting‑edge technologies, the company delivers high‑efficiency, eco‑friendly and sustainable lithium‑ion battery production lines, bringing revolutionary upgrades to the new‑energy battery sector.
Loading...
Name
Phone
Organization
Use Case
Database Platform