S-WLP Steel-Spring Isolator S-WLP-5010.../150

Spring elements are used effectively for the insulation of machinery within the power station. Turbo workshops, pumps, etc. They provide static support; reduce the transmission of the base of the vehicle. Spring elements typically consist of three main components: upper, lower, spiral-ring springs and viscous elastic resisters. The frequency of the system is usually between 2 ~7 Hz. The basic design of the spring element is connected to the top and base by a set of spiral-ring steel compressed springs. In general; due to resistance from natural materials of steel components; low resistance from spring elements. As long as a higher resistance characteristic is required; a viscous elastic resistance component can be integrated into the spring component. An important feature of spring components is their ability to be locked at a predetermined compression level (preloading). Preloading springs are installed at lock position; thus, they serve as solid support. At the end of the installation - possibly the installation of heavy mechanical - spring elements was activated; they were unlocked. From that moment onwards; the equipment acts as a vibration control element. This product mix covers the basic isolation of most typical applications at power stations and the installation of condensers. Optimal settings can be achieved by combining a set of spring widgets into an application. The spring element is not related to additional obstructive elements. Without blocking; the payload over which the component is covered is from 126 kN ~2096 kN; the payload of the block is up to 1,300 kN. Application area Automobile elasticity base, Autowheel group elasticity base, Coal grinder elasticity base, Winder elasticity base, Windbreaker emitters, condensers

➤ ➤ ➤ ➤ ➤ + DIN 65Si2Mn; ≥280h; 250 ≤3.8%; ＜±4%; 160mm; 22mm, 58mm; ＞10Hz; ≥90%; Equipment, Dimensions 2.0/2.1/2.2; Equipment (5010 ). CW Operating Temperature **-33℃~+87℃**; - 43℃~+114℃; Aging, +; [kN]; Weight [ Hz] [°C] - Dimensions [mm] +; H 0; H n; H m; H 1; ( ) S-WLP Series [kN] [kN/mm] [kN/mm] [mm] H 0 H d H n S-WLP-5010-4.0/150 640 4.26 1.26 840 — 700 S-WLP-5010-6.0/150 960 6.40 1.89 S-WLP-5010-8.0/150 1279 8.53 2.52 Weight 1191 kg (*) Weight; 1) DIN EN 13906-1 2) 2 x 4 mm 3) Product