AutoGet MT handheld automatic fiber instrument

Fiber cleaning stick: The tip uses soft, imported lint-free fiber 0.5~0.8mm thick. Pressed against the end face at constant pressure and rotated at high speed (80 revolutions/second) for 3~5 seconds, it neither breaks nor sheds debris. Contaminants are removed and retained within the dense fibers. 20 consecutive end faces can be cleaned without cross-contamination; performance decreases slightly after 50 end faces.

The fiber-optic cleaning stick uses efficient imported cleaning cloth and is assembled in a Class 1000 cleanroom. Widely used and trusted in optical communications domestically and overseas, its Japanese ultrafine-fiber tip provides antistatic properties and thorough cleaning.

Number of Cleaning Operations [HC-125 Type Cleaning Stick (1.25mm)]: 15000~25000 times Cleaning Target [HC-125 Type Cleaning Stick (1.25mm)]: LC、MU End Face

The fiber end-face cleaning pen tip is made of soft, imported lint-free fiber 0.5~0.8mm thick. When pressed against a fiber end face at constant pressure and rotated at high speed (80 revolutions/second) for 3~5 seconds, it neither breaks nor sheds debris. Contaminants are removed and retained within the dense fibers. 20 consecutive end faces can be cleaned without cross-contamination; performance decreases slightly after 50 end faces.

Number of Cleaning Operations [HC-250 Type Cleaning Stick (2.5mm)]: 25000~40000 times Cleaning Target [HC-250 Type Cleaning Stick (2.5mm)]: FC、SC、ST、E2000

The fiber end-face cleaning pen tip is made of soft, imported lint-free fiber 0.5~0.8mm thick. When pressed against a fiber end face at constant pressure and rotated at high speed (80 revolutions/second) for 3~5 seconds, it neither breaks nor sheds debris. Contaminants are removed and retained within the dense fibers. 20 consecutive end faces can be cleaned without cross-contamination; performance decreases slightly after 50 end faces.

Output Power: >10mW Output Distance: ≤10 Kilometers Output Wavelength: 650nm