KLT-C8K-S5K3L2-D6B
Samsung S5K3L2 MIPI Autofocus 1300;
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Iris | 2.2V |
| Pixels | 4208 x 3120W |
| Visual angle | 76.8° |
| Model Group Dimensions | 17.1 x 10.6 mm |
| Module Type | Autofocus |
| Match Connector | AXF2401s |
Applications
Datasheet
Supplier Information
Related Products
-
JAL-2721 V2.0
CMOS Image Sensors
Kailaptech
Iris: 2.8V Pixels: 2592 x 1944 (QSXGA)W
OmniVision OV5640 MIPI Autofocus 500;
-
JAL-7675W V1.0
CMOS Image Sensors
Kailaptech
Iris: 2.5V Pixels: 640 x 480 (VGA)W
OmniVision OV7675 DVP Focal Length 30 VGA;
-
JAL-CW2-OV5640 V3.0
CMOS Image Sensors
Kailaptech
Iris: 2.8V Pixels: 2592 x 1944 (QSXGA)W
OmniVision OV5640 MIPI Autofocus LED 500;
-
JAL-CW2-OV5640 V4.0
CMOS Image Sensors
Kailaptech
Iris: 2.8V Pixels: 2592 x 1944 (QSXGA)W
OmniVision OV5640 MIPI Autofocus LED 500;
-
Uncooled intensified scientific camera
CMOS Image Sensors
Atomsci
CMOS Camera - Resolution: 2048*2048 CMOS Camera - Pixel size: 6.5 um × 6.5 um CMOS Camera - Sensor Dimensions: 1.2"
Zhongke Yuanzi's ICMOS camera directly couples a CMOS image sensor to an image intensifier through a fiber-optic taper. This intensified camera series offers compact construction, small size, low power consumption and low distortion, providing low-light, high-resolution, wide-dynamic-range, large-area image output. Customization is available for different applications. Coupling an image intensifier to a CMOS sensor through relay optics provides two key benefits. First, selecting suitable intensifier input windows, photocathodes and filters extends the ICMOS spectral response from visible light to X-rays, ultraviolet or near infrared for different uses. Second, sensitivity is greatly improved to 10⁻⁴lx, addressing low-light imaging limitations of ordinary cameras. With the intensifier as its core, the camera uses pulsed high voltage to control optical-electrical-optical-electrical conversion and amplify weak light. Advanced optomechanical and electronic integration combines the intensifier, picosecond/nanosecond gating module, timing module, fiber-optic taper and CMOS sensor. Short optical gating supports synchronized weak-signal detection in low-light imaging, range gating, combustion diagnostics, time-domain Raman spectroscopy, three-dimensional imaging and fluorescence-lifetime measurements.
Related Articles
In photonics and laser technology, devices that manipulate optical signals via the electro-optic effect form the backbone of precision optical systems. Electro-optic phase modulators and electro-optic deflectors are two prominent examples of this device category. As a critical hardware solution for high-speed, high-accuracy laser beam direction control, electro-optic deflectors are widely deployed across industrial and research settings. Below is a detailed overview of their core structure, key performance drivers, and primary use cases.
As a top‑tier supplier of tunable laser chips, Shandong Zhongxin Optoelectronics Technology Company has newly launched the world’s first budget‑friendly fiber‑Bragg‑grating (FBG) demodulator and scanning module.
A laser bar is an array semiconductor laser chip integrated with dozens of emitters, which realizes hundred-watt quasi-continuous output on a single chip. With regular emitter arrangement and controllable fill factor, integrated thermal design and superior wall-plug efficiency compared to single chips, it acts as the core light source for high-power pumping, medical lasers and precision processing.
BEIJING JIEPU TREND supplies YAG+Er:YAG+YAG bonded composite slab laser crystals for high‑power solid‑state laser systems. The monolithic slab consists of two undoped YAG end‑cap layers and a central Er‑doped YAG gain segment. The overall dimension is 9 mm×9 mm×9 mm.
Loading...
Name
Phone
Organization
Use Case
Database Platform