GT-FSW 1XN Optical Switch
System Introduction An optical switch is an optical path control device that controls and converts optical paths. It plays an important role in optical communication applications. Optical switches are mainly used in: multi-channel optical monitoring in optical transmission systems, LAN multi-light-source/detector automatic switching and optical sensing multi-point dynamic monitoring systems; optical test systems for testing fibers, optical devices, networks and field engineering optical cables; optical device assembly. A 1×N optical switch can route one input to one of N output paths. Performance Specifications Model GT-FSW 1XN Insertion Loss 1<N≤32 32<N≤64 64<N≤128 Typ: 0.8 Max: 1.0 Type 0.8 Max: 1.0 Type 1.0 Max 1.2 Operating Wavelength MM: 850±40/1300±40 SM: 1260-1650nm Test Wavelength 850/1300 nm 1310/1550 nm Return Loss SM≥50, MM≥30 dB Channel Crosstalk ≥55 dB Polarization Dependent Loss ≤0.05 dB Wavelength Dependent Loss ≤0.25 dB Temperature Dependent Loss ≤0.25 dB Repeatability ≤±0.05 dB Service Life ≥10 Million cycles Transmitted Optical Power ≤500 mW Switching Time ≤10 ms (≤10 adjacent channel switching) Operating Temperature -10~+65 ℃ Storage Temperature -40~+85 ℃ Operating Humidity 5~95 % Connector Types LC/PC, FC/APC, FC/PC etc. Device Monitoring Ports RJ45, RS232 Power Supply Module +5V Equipment AC: 85~264V (50/60Hz) & DC:36~72V Chassis Types 19-inch standard 1U rack (483x330x44mm) 19-inch standard 2U rack (483x330x89mm) Desktop device: 245(L) x320(D)x110(H)mm
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Insertion Loss - 1<N≤32 | Tye:0.8 Max: 10 |
| Insertion Loss - 32<N≤64 | Type0.8 Max: 1.0 |
| Insertion Loss - 64<N≤128 | Type 1.0 Maxe 1.2 |
| Channel Interference | ≥55 db |
| Polarization Dependent Loss | ≤0.05 dB |
| Temperature Dependent Loss | ≤0. 25 dB |
| Lifetime | ≥10 Million |
| Transmitted Optical Power | ≤500 mw |
| Connector Style | LC/PC, FC/APC, FC/PC etc. |
| Equipment Monitoring Port | RJ45、RS232 |
| Power Supply | +5V |
| Chassis Type | 19-inch standard 1U rack 48330x44m) 19-inch standard 2U rack (483x330x89mm); benchtop device: 245() x320(D)x110(H)mm |
| Tye:0.8 Max:10 | Type0.8 Max: 1.0 |
| Channel Interference | ≥55 db |
| Transmitted Optical Power | ≤500 mw |
| E quipment | AC: 85~ 264V (50/60Hz)&DC:36~72V |
Applications
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
VS-CS01-TO
Fiber Optic Switches
Mvstek
• Chip Dimensions: 1.71.70.47; mm Mirror Diameter: 0.82; mm Bond Pad Dimensions: 120120; um
Two-axis MEMS microscopes;
-
MEMS Optical Switch
Fiber Optic Switches
Hzqiyuetech
The Venus-MEMS Automatic Concordance System is an autonomous light-to-light smart device developed and produced by Hangzhou Qilong Technologies Ltd.
-
Automatic Optical Switch Scanning System
Fiber Optic Switches
Hzqiyuetech
The system is designed to have a single channel for searching...
-
1 N light switch module
Fiber Optic Switches
Ovlink
1x N-ray switches are functional devices with optical exchange capabilities. In fibre-optic transmission systems; for multi-channel fibre-optic monitoring, multi-optic source/detector selection, fibre-optic routing protection, etc.; also for fibre-optic and component testing, outdoor cable testing and multi-point fibre-optic sensor monitoring systems. Low losses, high reliability Parallel interface (TTL) modular design
-
DOSW-100X Desktop Optical Switch
Fiber Optic Switches
Ovlink
DOSW-100X light switch is a functional device with the effect of switching light; stability is reliable. In fibre-optic transmission systems; for multi-road light surveillance, LAN, multi-light source/detector switching, and protected conversion of Ether network, etc. In fibre-optic test systems; for fibre-optic and fibre-optic device testing, network testing, field cable testing, fibre-optic sensor multipoint monitoring systems, etc. Low-input loss range; 1260 ~1650 nm auto-scanning Support RS-232/RJ45 interface; USB communications; control with upboard software
Related Articles
A laser bar is an array semiconductor laser chip integrated with dozens of emitters, which realizes hundred-watt quasi-continuous output on a single chip. With regular emitter arrangement and controllable fill factor, integrated thermal design and superior wall-plug efficiency compared to single chips, it acts as the core light source for high-power pumping, medical lasers and precision processing.
Driven by the continuous pursuit of higher precision and efficiency in optical communication and optoelectronic device manufacturing, OLCR-1000 Low-Coherence Interferometer, independently developed by Wuhan Guanggu Interconnect Technology Co., Ltd., provides an innovative technical solution for distributed return loss testing of optical fibers and optoelectronic devices.
Fluoride crystal glass and K9 optical glass are two core optical substrates widely used in precision optical systems, laser equipment and photoelectric scientific research.
For pulsed laser and full-spectrum optical testing, photodiodes and thermopiles have inherent drawbacks. Photodiodes show weak response in infrared band, while thermopiles feature slow response and cannot capture nanosecond narrow pulses.
Loading...
Name
Phone
Organization
Use Case
Database Platform