RFDR-AN-10-HO RF Amplifier (10 GHz Analog, High Power)
Shanghai Hanyu's RFDR-AN-10-HO is a broadband RF amplifier module designed for analog applications up to 10 GHz. The RFDR-AN-10-HO features low noise figure and a linear transfer function, with a 1 dB compression point above 23dBm.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Cutoff Frequency | 80k |
| Small-Signal Gain (2GHz<f<10GHz) S21 | 28 |
| Gain Ripple (f<10GHz) (Max.) | ±1.5 |
| Saturated Output Power | 26dBm |
| Input Return Loss (f<10GHz) | -10 |
| Output Port Return Loss (f < 10 GHz) | -15 |
| Isolation (S_12) (f<10GHz) | -60 |
| Power Consumption (Small Signal) | 6.0 |
| Input RF Connector | Wiltron Female K |
| Output RF Connector | Wiltron Male K |
| Package Dimensions | 54x48x11mm |
| Max. Supply Voltage Range | 11 |
| DC Bias Current | 500mA |
| Storage Temperature Range | -10~ +70 |
| Small-Signal Gain (2GHz<f<10GHz) S21 | dB |
| Gain Ripple (f<10GHz) (Max.) | dB |
| Input Return Loss (f<10GHz) | dB |
| Output Port Return Loss (f < 10 GHz) | dB |
Applications
Key Features
Datasheet
Supplier Information
Related Products
-
MBC-DG-LAB
Optical Modulator Drivers
Shconnet
DC Voltage: -10V Locking Range: 360 4-Point Locking Accuracy: 89.5
The MBC-DG-LAB is a bench top automatic bias controller specially designed to lock the operating point of LiNb03 Mach-Zehnder modulators and ensure a stable operation over time and environmental conditions. MBC-DG-LAB is an automatic benchtop bias controller, specially designed for the operating point of LiNb03 Mach-Zehnder modulators, ensuring stable operation over time and environmental conditions. The MBC-DG-LAB controller is a continuously tunable bias controllers, meaning it allows operation of the controlled inten
-
RFDR-AN-10-MO RF Amplifier (Analog, Medium Power)
Optical Modulator Drivers
Shconnet
Cutoff Frequency: 50k
Shanghai Hanyu's RFDR-AN-10-MO is a broadband RF amplifier module designed for analog applications up to 12 GHz. The RFDR-AN-10-MO features low noise figure and a linear transfer function, with a 1 dB compression point above 21 dBm.
-
RFDR-AN-20-HO RF Amplifier (20 GHz Analog, High Power)
Optical Modulator Drivers
Shconnet
Cutoff Frequency: 80k
Shanghai Hanyu's RFDR-AN-20-HO is a broadband RF amplifier module designed for analog applications up to 20 GHz. The RFDR-AN-20-HO features low noise figure and a linear transfer function, with a 1 dB compression point above 23dBm.
-
100G 200G modem drive
Optical Modulator Drivers
Ovlink
Crosses your eyes: min: 40 50; max: 60 bandwidth: Min: -3dB bandwidth 25 Low frequency cut-off frequency: Min: Low frequency cut-off frequency 100
0D-3245 is a high-performance 32Gbps differential/single-end output lithium modem drive; 100/200Gbps are supported. The driver differential input signal range ranges from 200 mVpp to 800 mVpp; with two modes of amplification with limits and linear amplification; with very low total concussions; with a maximum output of 7 Vpp in limit mode; and with linear amplification mode output up to 5 Vpp. OD-3245 is a dedicated control route; mode switching, gain control, output peak monitoring, etc., can be achieved through an on-board or touch screen; and ease of use. Alignable vocado source modules allow for the harmonization of 100 MHz intervals in the entire C-band; wavelength settings are flexible. It is well suited for use by R & D units engaged in 100G/200G velocity-related communications. 25Ghz typical bandwidth; single channel rate 32Gpbs differential input, single-end output max 7Vpp linear magnification max 5Vpp
Related Articles
A laser bar is an array semiconductor laser chip integrated with dozens of emitters, which realizes hundred-watt quasi-continuous output on a single chip. With regular emitter arrangement and controllable fill factor, integrated thermal design and superior wall-plug efficiency compared to single chips, it acts as the core light source for high-power pumping, medical lasers and precision processing.
Driven by the continuous pursuit of higher precision and efficiency in optical communication and optoelectronic device manufacturing, OLCR-1000 Low-Coherence Interferometer, independently developed by Wuhan Guanggu Interconnect Technology Co., Ltd., provides an innovative technical solution for distributed return loss testing of optical fibers and optoelectronic devices.
Fluoride crystal glass and K9 optical glass are two core optical substrates widely used in precision optical systems, laser equipment and photoelectric scientific research.
For pulsed laser and full-spectrum optical testing, photodiodes and thermopiles have inherent drawbacks. Photodiodes show weak response in infrared band, while thermopiles feature slow response and cannot capture nanosecond narrow pulses.
Loading...
Name
Phone
Organization
Use Case
Database Platform