GPX-3000 Series Fiber and Glass Processing System
GPX-3000 series, glass processing system and fiber splicer. Over the past more than 23 years, Vytran has been leading in glass processing and specialty fiber splicing, and has built a comprehensive application database. This technical accumulation and application experience has been applied to our GPX-3000 series fiber processing systems.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Fiber Type (Non-Polarization-Maintaining) | MM, SM, PCF, LMA; round, non-round; quartz, soft glass |
| Max. Fiber Cladding Diameter | 1.25mm |
| Splicing Method | Filament fusion splicing |
| Filament Temperature Range | Room temperature to 2500°C |
| Splice Loss Estimation (Note 2) | Included (proprietary method based on mode coupling) |
| Typical Splice Strength | >250kpsi SMF (ITU G.652); cleave the fiber or prepare the fiber end-face using LDC-400 or other suitable methods |
| Splice Point Strength Enhancement | Included (fire polishing) |
| Fiber Side Imaging | Side-view fiber core imaging, true core imaging technology |
| Fiber End-Face Imaging | Included, used for polarization-maintaining fiber axis alignment and fiber end-face observation (Note 3) |
| Fiber Alignment Method | Automatic (Note 5) |
| Cladding/Fiber Diameter | Included (automatic measurement) |
| End-Face Inspection | Displayed via imaging |
| End-Face Cleave Angle | Included (automatic measurement) |
| Splice Loss Estimation | Included (automatic measurement) |
| Active Power Alignment | Included |
| Furnace Z-Axis Displacement | +/- 90mm "home" position, Note 8 |
| Maximum Fiber Z-Axis Displacement | 180mm |
| X-Y Fiber Positioning Accuracy | 0.02um |
| Max. Tapering Length | Up to 150mm (Note 11) (maximum travel 180mm) |
| Max. Taper Ratio | Standard up to 1:10; up to 1:100 achievable |
| Max. Tapering Speed | Determined by tapering requirements, typical value 1 mm/s |
| Typical Thermal Isolation Taper Zone Loss | <0.01dB |
| PC Control and Custom-Designed Software | Included |
| Mouse | Included |
Applications
Datasheet
Supplier Information
Related Products
-
JX-130 Ribbon Fiber Aligner
Optical Fibers
Jxcmc
Applicable Optical fiber: 12-Core Ribbon Fiber Fiber diameter: 125μm Core-Alignment Loss [Single Fiber]: Single-Fiber Loss No Greater Than 0.3dB
-
JX-150 Single-Fiber V-Groove Aligner
Optical Fibers
Jxcmc
Applicable Optical fiber: Single-core Single-mode 、 Multimode Silica fiber Fiber diameter: 125μm Core-Alignment Loss [Single Fiber; Same Single-Mode Fiber]: Single-fiber loss no greater than 0.5dB (same single-mode fiber)
-
JX-160A Single-Fiber Aligner
Optical Fibers
Jxcmc
Applicable Optical fiber: Single-core Optical fiber Fiber diameter: 125μm Core-Alignment Loss: ≤0.05dB
-
JX-160A(400μm) Fiber Aligner
Optical Fibers
Jxcmc
-
JX-160A(530μm) Fiber Aligner
Optical Fibers
Jxcmc
Related Articles
Medical disposable‑device manufacturers have long demanded high‑performance interconnect accessories for single‑use equipment. The newly‑launched REDEL‑P disposable‑connector family addresses this requirement and delivers premium‑grade electrical connections for varied one‑time‑use medical instruments.
A microlens array (MLA) is a high-precision optical component composed of hundreds or thousands of tiny, uniformly arranged micro lenses on a single flat substrate. Unlike traditional single lenses that focus one light beam, a microlens array can split, homogenize, and reshape light on a micro scale. It is widely paired with VCSELs, lasers, and image sensors, becoming a core part of modern miniature optical systems.
BEIJING JIEPU TREND supplies YAG+Er:YAG+YAG bonded composite slab laser crystals for high‑power solid‑state laser systems. The monolithic slab consists of two undoped YAG end‑cap layers and a central Er‑doped YAG gain segment. The overall dimension is 9 mm×9 mm×9 mm.
Driven by the rapid upgrading of industrial automation, high-precision displacement sensing technology has become a core foundation of intelligent manufacturing.
Loading...
Name
Phone
Organization
Use Case
Database Platform